Commit 56d074d26c58 ("Bluetooth: hci_qca: don't use IS_ERR_OR_NULL()
with gpiod_get_optional()") will cause below serious regression issue:
BT can't be enabled any more after below steps:
cold boot -> enable BT -> disable BT -> BT enable failure
if property enable-gpios is not configured within DT|ACPI for QCA_QCA6390.
The commit wrongly changes flag @power_ctrl_enabled set logic for this
case as shown by its below code applet and causes this serious issue.
qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
GPIOD_OUT_LOW);
- if (IS_ERR_OR_NULL(qcadev->bt_en)) {
+ if (IS_ERR(qcadev->bt_en)) {
dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
power_ctrl_enabled = false;
}
Fixed by reverting the mentioned commit for QCA_QCA6390.
Fixes: 56d074d26c58 ("Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional()")
Reported-by: Wren Turkal <[email protected]>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218726
Link: https://lore.kernel.org/linux-bluetooth/[email protected]/T/#m73d6a71d2f454bb03588c66f3ef7912274d37c6f
Signed-off-by: Zijun Hu <[email protected]>
Tested-by: Wren Turkal <[email protected]>
---
drivers/bluetooth/hci_qca.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 92fa20f5ac7d..4079254fb1c8 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2357,6 +2357,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
if (IS_ERR(qcadev->bt_en)) {
dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
power_ctrl_enabled = false;
+ } else if (!qcadev->bt_en && qcadev->btsoc_type == QCA_QCA6390) {
+ power_ctrl_enabled = false;
}
qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
--
2.7.4
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=846527
---Test result---
Test Summary:
CheckPatch FAIL 1.59 seconds
GitLint FAIL 0.90 seconds
SubjectPrefix PASS 0.24 seconds
BuildKernel PASS 30.10 seconds
CheckAllWarning PASS 32.58 seconds
CheckSparse PASS 38.41 seconds
CheckSmatch FAIL 36.09 seconds
BuildKernel32 PASS 28.87 seconds
TestRunnerSetup PASS 518.43 seconds
TestRunner_l2cap-tester PASS 20.48 seconds
TestRunner_iso-tester PASS 28.64 seconds
TestRunner_bnep-tester PASS 4.71 seconds
TestRunner_mgmt-tester PASS 109.59 seconds
TestRunner_rfcomm-tester PASS 7.29 seconds
TestRunner_sco-tester PASS 14.97 seconds
TestRunner_ioctl-tester PASS 7.67 seconds
TestRunner_mesh-tester PASS 5.72 seconds
TestRunner_smp-tester PASS 6.72 seconds
TestRunner_userchan-tester PASS 4.85 seconds
IncrementalBuild PASS 33.12 seconds
Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
[v5,1/2] Bluetooth: qca: Fix BT enable failure for QCA_QCA6390
WARNING: Reported-by: should be immediately followed by Closes: with a URL to the report
#119:
Reported-by: Wren Turkal <[email protected]>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218726
total: 0 errors, 1 warnings, 8 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/src/13637840.patch has style problems, please review.
NOTE: Ignored message types: UNKNOWN_COMMIT_ID
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: GitLint - FAIL
Desc: Run gitlint
Output:
[v5,1/2] Bluetooth: qca: Fix BT enable failure for QCA_QCA6390
WARNING: I3 - ignore-body-lines: gitlint will be switching from using Python regex 'match' (match beginning) to 'search' (match anywhere) semantics. Please review your ignore-body-lines.regex option accordingly. To remove this warning, set general.regex-style-search=True. More details: https://jorisroovers.github.io/gitlint/configuration/#regex-style-search
16: B3 Line contains hard tab characters (\t): " dev_warn(&serdev->dev, "failed to acquire enable gpio\n");"
17: B3 Line contains hard tab characters (\t): " power_ctrl_enabled = false;"
24: B1 Line exceeds max length (139>80): "Link: https://lore.kernel.org/linux-bluetooth/[email protected]/T/#m73d6a71d2f454bb03588c66f3ef7912274d37c6f"
[v5,2/2] Bluetooth: qca: Fix BT enable failure for QCA_QCA6390 after disable then warm reboot
WARNING: I3 - ignore-body-lines: gitlint will be switching from using Python regex 'match' (match beginning) to 'search' (match anywhere) semantics. Please review your ignore-body-lines.regex option accordingly. To remove this warning, set general.regex-style-search=True. More details: https://jorisroovers.github.io/gitlint/configuration/#regex-style-search
1: T1 Title exceeds max length (93>80): "[v5,2/2] Bluetooth: qca: Fix BT enable failure for QCA_QCA6390 after disable then warm reboot"
##############################
Test: CheckSmatch - FAIL
Desc: Run smatch tool with source
Output:
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/hci_core.o] Error 139
make[4]: *** Deleting file 'net/bluetooth/hci_core.o'
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: drivers/bluetooth/bcm203x.o] Error 139
make[4]: *** Deleting file 'drivers/bluetooth/bcm203x.o'
make[4]: *** Waiting for unfinished jobs....
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: drivers/bluetooth/bpa10x.o] Error 139
make[4]: *** Deleting file 'drivers/bluetooth/bpa10x.o'
make[3]: *** [scripts/Makefile.build:485: drivers/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: drivers] Error 2
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
---
Regards,
Linux Bluetooth