Hi,
I have installed Bluez-4.30 on Fedora 9 and then configured my
bluetooth adapter like below:
1) ./hciconfig -a hci0 up
2) ./hciconfig -a hci0 auth
3) ./hciconfig -a hci0 encrypt
4) hcitool -i hci0 cc 00:1F:5D:B5:36:BC
I m getting hcidump -X -V output like below:
=================================================================
HCI sniffer - Bluetooth packet analyser ver 1.42
device hci0 snap_len: 1028 filter: 0xffffffff
<HCI Command: Create Connection (0x01 | 0x0005) plen 13
bdaddr 00:1F:5D:B5:36:BC ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01 | 0x0005) status 0x00 ncmd1
> HCI event: Link Key Request (0x17) plen 6
bdaddr 00:1F:5D:B5:36:BC
> HCI Event: Connect Complete (0x03) plen 11
Status 0x22 handle 0 bdaddr 00:1F:5D:B5:36:BC type ACL encrypt 0x00
Error: LMP Response Timeout
===============================================================
5) rfcomm connect hci0 00:1F:5D:B5:36:BC 13
I have got hcidump -X -V output like below:
===============================================================
HCI sniffer - Bluetooth packet analyser ver 1.42
device hci0 snap_len: 1028 filter: 0xffffffff
<HCI Command: Create Connection (0x01 | 0x0005) plen 13
bdaddr 00:1F:5D:B5:36:BC ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01 | 0x0005) status 0x00 ncmd1
> HCI event: Link Key Request (0x17) plen 6
bdaddr 00:1F:5D:B5:36:BC
< HCI Command: Create Connection Cancel (0x01 | 0x0008) plen 6
bdaddr 00:1F:5D:B5:36:BC
> HCI Event: Command status (0x0f) plen 4
Create Connection Cancel (0x01 | 0x0008) status 0x01 ncmd 1
Error: Unknown HCI Command
> HCI Event: Connect Complete (0x03) plen 11
Status 0x22 handle 0 bdaddr 00:1F:5D:B5:36:BC type ACL encrypt 0x00
Error: LMP Response Timeout
===============================================================
Pls guide me exactly where is the problem?
--
Kartikey Parmar
President AAECC
09879095390 (M)