I've been trying to get a bt headset to work again with bluez for some time now, so I'd appreciate any help available on this - about the last time it worked was circa bluez-4.17 - I used:
Dbus-1.2.1
Dbus-glib-0.76
Bluez-gnome-1.8
Alsa-1.0.17
If I use more recent versions of bluez - I've tried all the way to bluez-4.41 - I can get other bt devices to work as long as I use /etc/dbus-1/system.d/bluetooth.conf from circa bluez-4.17, but I cannot get a bt headset to work.
I saw in this list that a more recent version of dbus might help getting a bt headset to work again, so I tried:
Dbus-1.2.14
Dbus-glib-0.80
..but then bluez-gnome does not find any devices to pair with, even if "hcitool scan" does find available devices. "simple-agent" does not seem to work up to bluez-4.41, so I cannot try to pair with the bt headset by that method either.
1. Are there prescribed versions of dbus, dbus-glib, alsa, etc that are required in order for a bt headset to work?
2. Why do I need to use an old /etc/dbus-1/system.d/bluetooth.conf for bluetoothd to start?
3. Is "simple-agent" supposed to work (I've seen various posts about required patches for dbus, etc)?
Thanks, John
DQotLS0tLU9yaWdpbmFsIE1lc3NhZ2UtLS0tLQ0KRnJvbTogbGludXgtYmx1ZXRvb3RoLW93bmVy
QHZnZXIua2VybmVsLm9yZyBbbWFpbHRvOmxpbnV4LWJsdWV0b290aC1vd25lckB2Z2VyLmtlcm5l
bC5vcmddIE9uIEJlaGFsZiBPZiBKb2huIEZyYW5raXNoDQpTZW50OiAxNSBKdW5lLCAyMDA5IDEz
OjQ5DQpUbzogbGludXgtYmx1ZXRvb3RoQHZnZXIua2VybmVsLm9yZw0KU3ViamVjdDogYmx1ZXRv
b3RoLCBkYnVzIGFuZCBibHVldG9vdGggaGVhZHNldHMNCg0KSSd2ZSBiZWVuIHRyeWluZyB0byBn
ZXQgYSBidCBoZWFkc2V0IHRvIHdvcmsgYWdhaW4gd2l0aCBibHVleiBmb3Igc29tZSB0aW1lIG5v
dywgc28gSSdkIGFwcHJlY2lhdGUgYW55IGhlbHAgYXZhaWxhYmxlIG9uIHRoaXMgLSBhYm91dCB0
aGUgbGFzdCB0aW1lIGl0IHdvcmtlZCB3YXMgY2lyY2EgYmx1ZXotNC4xNyAtIEkgdXNlZDoNCg0K
RGJ1cy0xLjIuMQ0KRGJ1cy1nbGliLTAuNzYNCkJsdWV6LWdub21lLTEuOA0KQWxzYS0xLjAuMTcN
Cg0KSWYgSSB1c2UgbW9yZSByZWNlbnQgdmVyc2lvbnMgb2YgYmx1ZXogLSBJJ3ZlIHRyaWVkIGFs
bCB0aGUgd2F5IHRvIGJsdWV6LTQuNDEgLSBJIGNhbiBnZXQgb3RoZXIgYnQgZGV2aWNlcyB0byB3
b3JrIGFzIGxvbmcgYXMgSSB1c2UgL2V0Yy9kYnVzLTEvc3lzdGVtLmQvYmx1ZXRvb3RoLmNvbmYg
ZnJvbSBjaXJjYSBibHVlei00LjE3LCBidXQgSSBjYW5ub3QgZ2V0IGEgYnQgaGVhZHNldCB0byB3
b3JrLg0KDQpJIHNhdyBpbiB0aGlzIGxpc3QgdGhhdCBhIG1vcmUgcmVjZW50IHZlcnNpb24gb2Yg
ZGJ1cyBtaWdodCBoZWxwIGdldHRpbmcgYSBidCBoZWFkc2V0IHRvIHdvcmsgYWdhaW4sIHNvIEkg
dHJpZWQ6DQoNCkRidXMtMS4yLjE0DQpEYnVzLWdsaWItMC44MA0KDQouLmJ1dCB0aGVuIGJsdWV6
LWdub21lIGRvZXMgbm90IGZpbmQgYW55IGRldmljZXMgdG8gcGFpciB3aXRoLCBldmVuIGlmICJo
Y2l0b29sIHNjYW4iIGRvZXMgZmluZCBhdmFpbGFibGUgZGV2aWNlcy4gInNpbXBsZS1hZ2VudCIg
ZG9lcyBub3Qgc2VlbSB0byB3b3JrIHVwIHRvIGJsdWV6LTQuNDEsIHNvIEkgY2Fubm90IHRyeSB0
byBwYWlyIHdpdGggdGhlIGJ0IGhlYWRzZXQgYnkgdGhhdCBtZXRob2QgZWl0aGVyLg0KDQoxLiBB
cmUgdGhlcmUgcHJlc2NyaWJlZCB2ZXJzaW9ucyBvZiBkYnVzLCBkYnVzLWdsaWIsIGFsc2EsIGV0
YyB0aGF0IGFyZSByZXF1aXJlZCBpbiBvcmRlciBmb3IgYSBidCBoZWFkc2V0IHRvIHdvcms/DQoN
CjIuIFdoeSBkbyBJIG5lZWQgdG8gdXNlIGFuIG9sZCAvZXRjL2RidXMtMS9zeXN0ZW0uZC9ibHVl
dG9vdGguY29uZiBmb3IgYmx1ZXRvb3RoZCB0byBzdGFydD8NCg0KMy4gSXMgInNpbXBsZS1hZ2Vu
dCIgc3VwcG9zZWQgdG8gd29yayAoSSd2ZSBzZWVuIHZhcmlvdXMgcG9zdHMgYWJvdXQgcmVxdWly
ZWQgcGF0Y2hlcyBmb3IgZGJ1cywgZXRjKT8NCg0KVGhhbmtzLCBKb2huDQotLQ0KVG8gYW5zd2Vy
IG15IG93biBwb3N0IGZvciB0aGUgYmVuZWZpdCBvZiBhbnlib2R5IHRoYXQgbWlnaHQgYmUgc3Ry
dWdnbGluZyB3aXRoIHRoaXM6DQoNClRoZSB0cmljayB3YXMgdG8gcnVuIGJsdWV0b290aC13aXph
cmQgZnJvbSBibHVlei1nbm9tZSBhcyByb290LCBpdCB0aGVuIHdvcmtzIHdpdGggdGhlIC9ldGMv
ZGJ1cy0xL3N5c3RlbS5kL2JsdWV0b290aC5jb25mIGZyb20gYmx1ZXotNC40MSwgcGFpcnMgd2l0
aCBteSBidCBoZWFkc2V0IGFuZCBhcGxheS9hcmVjb3JkIHByb2R1Y2UgdGhlIGV4cGVjdGVkIHJl
c3VsdC4NCg0KVGhlIGhlYWRzZXQgd29ya3Mgd2l0aDoNCg0KYmx1ZXotNC40MQ0KYmx1ZXotZ25v
bWUtMS44DQpkYnVzLTEuMi4xNA0KZGJ1cy1nbGliLTAuODANCmFsc2EtMS4wLjIwDQprZXJuZWwt
Mi42LjI5LjINCg0KSm9obiAsDQoNCkkgdXBncmFkZWQga2VybmVsIHRvIDIuNi4zMC5yYzggLCBi
bHVlei00LjQxLCBkYnVzIDEuMi4xNCAgZnJvbSBVYnVudHUgOS4wNCAuSSBoYXZlIHZlcmlmaWVk
IGJsdWV6LWdub21lIGlzIDEuOCxkYnVzLWdsaWItODAgZGVmYXVsdC5Gb3IgYWxzYSAsd2hhdCBk
byBpIG5lZWQgaW5zdGFsbCA/IEkgZm91bmQgdGhhdCB0aGVyZSBhcmUgbG90IG9mIHBhY2thZ2Vz
IGluIEFMU0EgbWFpbiBwYWdlIHN1Y2ggYXMgZHJpdmVyICxsaWJyYXJ5ICwgdXRsaWxpdHkgLHBs
dWdpbiBmaXJtd2FyZSAsdG9vbHMuIEFmdGVyIGluc3RhbGxhdGlvbiAgb25lIG9mIGFsc2EgcGFj
a2FnZSwgaSBhbSBub3QgYWJsZSB0byBsb2dpbiBhZ2Fpbi5QbGVhc2Ugc2hhcmUgeW91ciBpbnN0
YWxsYXRpb24gcHJvY2VkdXJlLg0KDQpUaGFua3MsDQpCYWxhamkuUA0KLS0tLS0tLS0NCkZvciBt
ZSwgbG9naWNhbGx5IHlvdSB3b3VsZCBvbmx5IG5lZWQgbGliYWxzYSBhbmQgYW4gYXBwcm9wcmlh
dGUgLmFzb3VuZHJjIC0gaG93ZXZlciwgdGhpcyBkb2VzIG5vdCBzZWVtIHRvIGJlIHRoZSBjYXNl
IGFuZCBpdCBhcHBlYXJzIHRoYXQgYWxzYS1saWJzLCBhbHNhLXV0aWxzIGFuZCBhbHNhLWRyaXZl
cnMgYXJlIHJlcXVpcmVkIGFuZCBhIHNvdW5kIGNhcmQgbmVlZHMgdG8gYmUgc2V0IHVwIGFuZCB3
b3JraW5nIG9uIHlvdXIgbWFjaGluZSBiZWZvcmUgdGhpbmdzIHdpbGwgd29yayB3aXRoIGEgYmx1
ZXRvb3RoIGhlYWRzZXQuDQoNCkkgY291bGQgYmUgY29tcGxldGVseSB3cm9uZyBpbiB0aGUgYWJv
dmUsIGJ1dCB0aGF0J3MgaG93IEkgZ290IHRoaW5ncyB3b3JraW5nLi4uDQoNCkpvaG4NCg==
----- Original Message ----
From: John Frankish <[email protected]>
To: "[email protected]" <[email protected]>
Sent: Thursday, 18 June, 2009 12:13:30 PM
Subject: RE: bluetooth, dbus and bluetooth headsets
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of John Frankish
Sent: 15 June, 2009 13:49
To: [email protected]
Subject: bluetooth, dbus and bluetooth headsets
I've been trying to get a bt headset to work again with bluez for some time now, so I'd appreciate any help available on this - about the last time it worked was circa bluez-4.17 - I used:
Dbus-1.2.1
Dbus-glib-0.76
Bluez-gnome-1.8
Alsa-1.0.17
If I use more recent versions of bluez - I've tried all the way to bluez-4.41 - I can get other bt devices to work as long as I use /etc/dbus-1/system.d/bluetooth.conf from circa bluez-4.17, but I cannot get a bt headset to work.
I saw in this list that a more recent version of dbus might help getting a bt headset to work again, so I tried:
Dbus-1.2.14
Dbus-glib-0.80
..but then bluez-gnome does not find any devices to pair with, even if "hcitool scan" does find available devices. "simple-agent" does not seem to work up to bluez-4.41, so I cannot try to pair with the bt headset by that method either.
1. Are there prescribed versions of dbus, dbus-glib, alsa, etc that are required in order for a bt headset to work?
2. Why do I need to use an old /etc/dbus-1/system.d/bluetooth.conf for bluetoothd to start?
3. Is "simple-agent" supposed to work (I've seen various posts about required patches for dbus, etc)?
Thanks, John
--
To answer my own post for the benefit of anybody that might be struggling with this:
The trick was to run bluetooth-wizard from bluez-gnome as root, it then works with the /etc/dbus-1/system.d/bluetooth.conf from bluez-4.41, pairs with my bt headset and aplay/arecord produce the expected result.
The headset works with:
bluez-4.41
bluez-gnome-1.8
dbus-1.2.14
dbus-glib-0.80
alsa-1.0.20
kernel-2.6.29.2
John ,
I upgraded kernel to 2.6.30.rc8 , bluez-4.41, dbus 1.2.14 from Ubuntu 9.04 .I have verified bluez-gnome is 1.8,dbus-glib-80 default.For alsa ,what do i need install ? I found that there are lot of packages in ALSA main page such as driver ,library , utlility ,plugin firmware ,tools. After installation one of alsa package, i am not able to login again.Please share your installation procedure.
Thanks,
Balaji.P
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
ICC World Twenty20 England '09 exclusively on YAHOO! CRICKET http://cricket.yahoo.com
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of John Frankish
Sent: 15 June, 2009 13:49
To: [email protected]
Subject: bluetooth, dbus and bluetooth headsets
I've been trying to get a bt headset to work again with bluez for some time now, so I'd appreciate any help available on this - about the last time it worked was circa bluez-4.17 - I used:
Dbus-1.2.1
Dbus-glib-0.76
Bluez-gnome-1.8
Alsa-1.0.17
If I use more recent versions of bluez - I've tried all the way to bluez-4.41 - I can get other bt devices to work as long as I use /etc/dbus-1/system.d/bluetooth.conf from circa bluez-4.17, but I cannot get a bt headset to work.
I saw in this list that a more recent version of dbus might help getting a bt headset to work again, so I tried:
Dbus-1.2.14
Dbus-glib-0.80
..but then bluez-gnome does not find any devices to pair with, even if "hcitool scan" does find available devices. "simple-agent" does not seem to work up to bluez-4.41, so I cannot try to pair with the bt headset by that method either.
1. Are there prescribed versions of dbus, dbus-glib, alsa, etc that are required in order for a bt headset to work?
2. Why do I need to use an old /etc/dbus-1/system.d/bluetooth.conf for bluetoothd to start?
3. Is "simple-agent" supposed to work (I've seen various posts about required patches for dbus, etc)?
Thanks, John
--
To answer my own post for the benefit of anybody that might be struggling with this:
The trick was to run bluetooth-wizard from bluez-gnome as root, it then works with the /etc/dbus-1/system.d/bluetooth.conf from bluez-4.41, pairs with my bt headset and aplay/arecord produce the expected result.
The headset works with:
bluez-4.41
bluez-gnome-1.8
dbus-1.2.14
dbus-glib-0.80
alsa-1.0.20
kernel-2.6.29.2