Firmware for rtl chipset is as part of the linux-firmware repository
in dir linux-firmware/rtl_bt. Today, the rtl8761a_config,
rtl8821a_config, rtl8723b_config and rtl8723bs_config files are used
in btrtl, but it doesn't actually exist, which causes errors like:
bluetooth: Direct firmware load for rtl_bt/rtl8821a_config.bin
failed with error -2
According to the files in the rtl_bt directory in the Linux firmware,
fixes the driver to load correct firmware file for rtl.
Signed-off-by: Meng Tang <[email protected]>
---
drivers/bluetooth/btrtl.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index c2030f7e25b4..e3cfe0dff07d 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -88,14 +88,14 @@ static const struct id_table ic_id_table[] = {
.config_needed = true,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8723bs_fw.bin",
- .cfg_name = "rtl_bt/rtl8723bs_config" },
+ .cfg_name = "rtl_bt/rtl8723bs_config-OBDA8723" },
/* 8723B */
{ IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_USB),
.config_needed = false,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8723b_fw.bin",
- .cfg_name = "rtl_bt/rtl8723b_config" },
+ .cfg_name = NULL },
/* 8723D */
{ IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB),
@@ -116,7 +116,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8821a_fw.bin",
- .cfg_name = "rtl_bt/rtl8821a_config" },
+ .cfg_name = NULL },
/* 8821C */
{ IC_INFO(RTL_ROM_LMP_8821A, 0xc, 0x8, HCI_USB),
@@ -131,7 +131,7 @@ static const struct id_table ic_id_table[] = {
.config_needed = false,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8761a_fw.bin",
- .cfg_name = "rtl_bt/rtl8761a_config" },
+ .cfg_name = NULL },
/* 8761B */
{ IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART),
@@ -921,15 +921,12 @@ MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
MODULE_FIRMWARE("rtl_bt/rtl8723a_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8723b_fw.bin");
-MODULE_FIRMWARE("rtl_bt/rtl8723b_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8723bs_fw.bin");
-MODULE_FIRMWARE("rtl_bt/rtl8723bs_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723bs_config-OBDA8723.bin");
MODULE_FIRMWARE("rtl_bt/rtl8723ds_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8723ds_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8761a_fw.bin");
-MODULE_FIRMWARE("rtl_bt/rtl8761a_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8821a_fw.bin");
-MODULE_FIRMWARE("rtl_bt/rtl8821a_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8822b_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8822b_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin");
--
2.20.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=622476
---Test result---
Test Summary:
CheckPatch PASS 1.65 seconds
GitLint PASS 1.02 seconds
SubjectPrefix PASS 0.85 seconds
BuildKernel PASS 30.72 seconds
BuildKernel32 PASS 27.17 seconds
Incremental Build with patchesPASS 36.75 seconds
TestRunner: Setup PASS 472.62 seconds
TestRunner: l2cap-tester PASS 15.49 seconds
TestRunner: bnep-tester PASS 6.11 seconds
TestRunner: mgmt-tester PASS 98.84 seconds
TestRunner: rfcomm-tester PASS 7.81 seconds
TestRunner: sco-tester PASS 7.49 seconds
TestRunner: smp-tester PASS 7.23 seconds
TestRunner: userchan-tester PASS 5.82 seconds
---
Regards,
Linux Bluetooth
Hi Meng,
> Firmware for rtl chipset is as part of the linux-firmware repository
> in dir linux-firmware/rtl_bt. Today, the rtl8761a_config,
> rtl8821a_config, rtl8723b_config and rtl8723bs_config files are used
> in btrtl, but it doesn't actually exist, which causes errors like:
>
> bluetooth: Direct firmware load for rtl_bt/rtl8821a_config.bin
> failed with error -2
>
> According to the files in the rtl_bt directory in the Linux firmware,
> fixes the driver to load correct firmware file for rtl.
>
> Signed-off-by: Meng Tang <[email protected]>
> ---
> drivers/bluetooth/btrtl.c | 13 +++++--------
> 1 file changed, 5 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> index c2030f7e25b4..e3cfe0dff07d 100644
> --- a/drivers/bluetooth/btrtl.c
> +++ b/drivers/bluetooth/btrtl.c
> @@ -88,14 +88,14 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .fw_name = "rtl_bt/rtl8723bs_fw.bin",
> - .cfg_name = "rtl_bt/rtl8723bs_config" },
> + .cfg_name = "rtl_bt/rtl8723bs_config-OBDA8723" },
this change is not explained.
>
> /* 8723B */
> { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_USB),
> .config_needed = false,
> .has_rom_version = true,
> .fw_name = "rtl_bt/rtl8723b_fw.bin",
> - .cfg_name = "rtl_bt/rtl8723b_config" },
> + .cfg_name = NULL },
.config_needed is set to false. Then we better use a request_firmware version where the existence of the file is optional.
And even if we wanted to remove it (which would make the .config_needed obsolute), we are not doing a NULL assignment, we just remove the line.
>
> /* 8723D */
> { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB),
> @@ -116,7 +116,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .fw_name = "rtl_bt/rtl8821a_fw.bin",
> - .cfg_name = "rtl_bt/rtl8821a_config" },
> + .cfg_name = NULL },
>
> /* 8821C */
> { IC_INFO(RTL_ROM_LMP_8821A, 0xc, 0x8, HCI_USB),
> @@ -131,7 +131,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .fw_name = "rtl_bt/rtl8761a_fw.bin",
> - .cfg_name = "rtl_bt/rtl8761a_config" },
> + .cfg_name = NULL },
>
> /* 8761B */
> { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART),
> @@ -921,15 +921,12 @@ MODULE_VERSION(VERSION);
> MODULE_LICENSE("GPL");
> MODULE_FIRMWARE("rtl_bt/rtl8723a_fw.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8723b_fw.bin");
> -MODULE_FIRMWARE("rtl_bt/rtl8723b_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8723bs_fw.bin");
> -MODULE_FIRMWARE("rtl_bt/rtl8723bs_config.bin");
> +MODULE_FIRMWARE("rtl_bt/rtl8723bs_config-OBDA8723.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8723ds_fw.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8723ds_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8761a_fw.bin");
> -MODULE_FIRMWARE("rtl_bt/rtl8761a_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8821a_fw.bin");
> -MODULE_FIRMWARE("rtl_bt/rtl8821a_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8822b_fw.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8822b_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin");
Regards
Marcel