Currently there is no way to restart le scan, and it's needed in
service scan method. The way it work: it disable, and then enable le
scan on controller.
During the restart, we must remember when the scan was started, and
it's duration, to later re-schedule the le_scan_disable work, that was
stopped during the stop scan phase.
Signed-off-by: Jakub Pawlowski <[email protected]>
---
include/net/bluetooth/hci_core.h | 5 +++
net/bluetooth/hci_core.c | 74 ++++++++++++++++++++++++++++++++++++++++
net/bluetooth/mgmt.c | 18 +++++++++-
3 files changed, 96 insertions(+), 1 deletion(-)
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index a37e10f..d3a232b 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -79,6 +79,8 @@ struct discovery_state {
s8 rssi;
u16 uuid_count;
u8 (*uuids)[16];
+ unsigned long scan_start;
+ unsigned long scan_duration;
};
struct hci_conn_hash {
@@ -354,6 +356,7 @@ struct hci_dev {
unsigned long dev_flags;
struct delayed_work le_scan_disable;
+ struct delayed_work le_scan_restart;
__s8 adv_tx_power;
__u8 adv_data[HCI_MAX_AD_LENGTH];
@@ -531,6 +534,8 @@ static inline void hci_discovery_filter_clear(struct hci_dev *hdev)
hdev->discovery.uuid_count = 0;
kfree(hdev->discovery.uuids);
hdev->discovery.uuids = NULL;
+ hdev->discovery.scan_start = 0;
+ hdev->discovery.scan_duration = 0;
}
bool hci_discovery_active(struct hci_dev *hdev);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index f045c06..946fbb9 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1617,6 +1617,7 @@ static int hci_dev_do_close(struct hci_dev *hdev)
cancel_delayed_work(&hdev->service_cache);
cancel_delayed_work_sync(&hdev->le_scan_disable);
+ cancel_delayed_work_sync(&hdev->le_scan_restart);
if (test_bit(HCI_MGMT, &hdev->dev_flags))
cancel_delayed_work_sync(&hdev->rpa_expired);
@@ -2830,6 +2831,8 @@ static void le_scan_disable_work_complete(struct hci_dev *hdev, u8 status,
return;
}
+ hdev->discovery.scan_start = 0;
+
switch (hdev->discovery.type) {
case DISCOV_TYPE_LE:
hci_dev_lock(hdev);
@@ -2869,6 +2872,8 @@ static void le_scan_disable_work(struct work_struct *work)
BT_DBG("%s", hdev->name);
+ cancel_delayed_work_sync(&hdev->le_scan_restart);
+
hci_req_init(&req, hdev);
hci_req_add_le_scan_disable(&req);
@@ -2878,6 +2883,74 @@ static void le_scan_disable_work(struct work_struct *work)
BT_ERR("Disable LE scanning request failed: err %d", err);
}
+static void le_scan_restart_work_complete(struct hci_dev *hdev, u8 status,
+ u16 opcode)
+{
+ unsigned long timeout, duration, scan_start, jiffy;
+
+ BT_DBG("%s", hdev->name);
+
+ if (status) {
+ BT_ERR("Failed to restart LE scan: status %d", status);
+ return;
+ }
+
+ if (!test_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks) ||
+ !hdev->discovery.scan_start)
+ return;
+
+ /* When the scan was sterted, hdev->le_scan_disable was queued after
+ * duration from scan_start. During scan restart this job was canceled,
+ * and we need to queue it again after proper timeout, to make sure that
+ * scan wouldn't work infinitely.
+ */
+ duration = hdev->discovery.scan_duration;
+ scan_start = hdev->discovery.scan_start;
+ jiffy = jiffies;
+ if (jiffy - scan_start <= duration) {
+ int elapsed;
+
+ if (jiffy >= scan_start)
+ elapsed = jiffy - scan_start;
+ else
+ elapsed = ULONG_MAX - scan_start + jiffy;
+
+ timeout = duration - elapsed;
+ } else {
+ timeout = 0;
+ }
+ queue_delayed_work(hdev->workqueue,
+ &hdev->le_scan_disable, timeout);
+}
+
+static void le_scan_restart_work(struct work_struct *work)
+{
+ struct hci_dev *hdev = container_of(work, struct hci_dev,
+ le_scan_restart.work);
+ struct hci_request req;
+ struct hci_cp_le_set_scan_enable cp;
+ int err;
+
+ BT_DBG("%s", hdev->name);
+
+ /* If controller is not scanning we are done. */
+ if (!test_bit(HCI_LE_SCAN, &hdev->dev_flags))
+ return;
+
+ hci_req_init(&req, hdev);
+
+ hci_req_add_le_scan_disable(&req);
+
+ memset(&cp, 0, sizeof(cp));
+ cp.enable = LE_SCAN_ENABLE;
+ cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
+ hci_req_add(&req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(cp), &cp);
+
+ err = hci_req_run(&req, le_scan_restart_work_complete);
+ if (err)
+ BT_ERR("Restart LE scan request failed: err %d", err);
+}
+
/* Copy the Identity Address of the controller.
*
* If the controller has a public BD_ADDR, then by default use that one.
@@ -2974,6 +3047,7 @@ struct hci_dev *hci_alloc_dev(void)
INIT_DELAYED_WORK(&hdev->power_off, hci_power_off);
INIT_DELAYED_WORK(&hdev->discov_off, hci_discov_off);
INIT_DELAYED_WORK(&hdev->le_scan_disable, le_scan_disable_work);
+ INIT_DELAYED_WORK(&hdev->le_scan_restart, le_scan_restart_work);
skb_queue_head_init(&hdev->rx_q);
skb_queue_head_init(&hdev->cmd_q);
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index ba3b4a5..93eadef 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -3896,6 +3896,9 @@ static void start_discovery_complete(struct hci_dev *hdev, u8 status,
hci_discovery_set_state(hdev, DISCOVERY_FINDING);
+ /* If the scan involves LE scan, pick proper timeout to shedule
+ * hdev->le_scan_disable that will stop it.
+ */
switch (hdev->discovery.type) {
case DISCOV_TYPE_LE:
timeout = msecs_to_jiffies(DISCOV_LE_TIMEOUT);
@@ -3912,9 +3915,22 @@ static void start_discovery_complete(struct hci_dev *hdev, u8 status,
break;
}
- if (timeout)
+ if (timeout) {
+ if (test_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER,
+ &hdev->quirks) &&
+ (hdev->discovery.uuid_count > 0 ||
+ hdev->discovery.rssi != HCI_RSSI_INVALID)) {
+ /* We mignt need to restart filtered scan. Remember when
+ * it was started and it's duration, so we might queue
+ * hdev->le_scan_disable again after the restart.
+ */
+ hdev->discovery.scan_start = jiffies;
+ hdev->discovery.scan_duration = timeout;
+ }
+
queue_delayed_work(hdev->workqueue,
&hdev->le_scan_disable, timeout);
+ }
unlock:
hci_dev_unlock(hdev);
--
2.2.0.rc0.207.ga3a616c
Hi Jakub,
> When using LE_SCAN_FILTER_DUP_ENABLE, some controllers would send
> advertising report from each LE device only once. That means that we
> don't get any updates on RSSI value, and makes Service Discovery very
> slow. This patch adds restarting scan when in Service Discovery, and
> device with filtered uuid is found, but it's not in RSSI range to send
> event yet. This way if device moves into range, we will quickly get RSSI
> update.
>
> Signed-off-by: Jakub Pawlowski <[email protected]>
> ---
> include/net/bluetooth/hci_core.h | 1 +
> net/bluetooth/mgmt.c | 53 ++++++++++++++++++++++++++++++++++++----
> 2 files changed, 49 insertions(+), 5 deletions(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel
Hi Jakub,
> Currently there is no way to restart le scan, and it's needed in
> service scan method. The way it work: it disable, and then enable le
> scan on controller.
>
> During the restart, we must remember when the scan was started, and
> it's duration, to later re-schedule the le_scan_disable work, that was
> stopped during the stop scan phase.
>
> Signed-off-by: Jakub Pawlowski <[email protected]>
> ---
> include/net/bluetooth/hci_core.h | 5 +++
> net/bluetooth/hci_core.c | 74 ++++++++++++++++++++++++++++++++++++++++
> net/bluetooth/mgmt.c | 18 +++++++++-
> 3 files changed, 96 insertions(+), 1 deletion(-)
patch has been applied to bluetooth-next tree.
However I did a few spelling fixes in the comments and enforced the line breaks a bit harder to make it more readable.
Regards
Marcel
When using LE_SCAN_FILTER_DUP_ENABLE, some controllers would send
advertising report from each LE device only once. That means that we
don't get any updates on RSSI value, and makes Service Discovery very
slow. This patch adds restarting scan when in Service Discovery, and
device with filtered uuid is found, but it's not in RSSI range to send
event yet. This way if device moves into range, we will quickly get RSSI
update.
Signed-off-by: Jakub Pawlowski <[email protected]>
---
include/net/bluetooth/hci_core.h | 1 +
net/bluetooth/mgmt.c | 53 ++++++++++++++++++++++++++++++++++++----
2 files changed, 49 insertions(+), 5 deletions(-)
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index d3a232b..52863c3 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1334,6 +1334,7 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event);
#define DISCOV_INTERLEAVED_TIMEOUT 5120 /* msec */
#define DISCOV_INTERLEAVED_INQUIRY_LEN 0x04
#define DISCOV_BREDR_INQUIRY_LEN 0x08
+#define DISCOV_LE_RESTART_DELAY msecs_to_jiffies(200) /* msec */
int mgmt_control(struct sock *sk, struct msghdr *msg, size_t len);
int mgmt_new_settings(struct hci_dev *hdev);
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 93eadef..24b5f7f 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -7261,6 +7261,21 @@ static bool eir_has_uuids(u8 *eir, u16 eir_len, u16 uuid_count, u8 (*uuids)[16])
return false;
}
+static void restart_le_scan(struct hci_dev *hdev)
+{
+ /* If controller is not scanning we are done. */
+ if (!test_bit(HCI_LE_SCAN, &hdev->dev_flags))
+ return;
+
+ if (time_after(jiffies + DISCOV_LE_RESTART_DELAY,
+ hdev->discovery.scan_start +
+ hdev->discovery.scan_duration))
+ return;
+
+ queue_delayed_work(hdev->workqueue, &hdev->le_scan_restart,
+ DISCOV_LE_RESTART_DELAY);
+}
+
void mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
u8 addr_type, u8 *dev_class, s8 rssi, u32 flags,
u8 *eir, u16 eir_len, u8 *scan_rsp, u8 scan_rsp_len)
@@ -7283,14 +7298,18 @@ void mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
/* When using service discovery with a RSSI threshold, then check
* if such a RSSI threshold is specified. If a RSSI threshold has
- * been specified, then all results with a RSSI smaller than the
- * RSSI threshold will be dropped.
+ * been specified, and HCI_QUIRK_STRICT_DUPLICATE_FILTER is not set,
+ * then all results with a RSSI smaller than the RSSI threshold will be
+ * dropped. If the quirk is set, let it through for further processing,
+ * as we might need to restart the scan.
*
* For BR/EDR devices (pre 1.2) providing no RSSI during inquiry,
* the results are also dropped.
*/
if (hdev->discovery.rssi != HCI_RSSI_INVALID &&
- (rssi < hdev->discovery.rssi || rssi == HCI_RSSI_INVALID))
+ (rssi == HCI_RSSI_INVALID ||
+ (rssi < hdev->discovery.rssi &&
+ !test_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks))))
return;
/* Make sure that the buffer is big enough. The 5 extra bytes
@@ -7325,12 +7344,20 @@ void mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
* kept and checking possible scan response data
* will be skipped.
*/
- if (hdev->discovery.uuid_count > 0)
+ if (hdev->discovery.uuid_count > 0) {
match = eir_has_uuids(eir, eir_len,
hdev->discovery.uuid_count,
hdev->discovery.uuids);
- else
+ /* If duplicate filtering does not report RSSI changes,
+ * then restart scanning to ensure updated result with
+ * updated RSSI values.
+ */
+ if (match && test_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER,
+ &hdev->quirks))
+ restart_le_scan(hdev);
+ } else {
match = true;
+ }
if (!match && !scan_rsp_len)
return;
@@ -7363,6 +7390,14 @@ void mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
hdev->discovery.uuid_count,
hdev->discovery.uuids))
return;
+
+ /* If duplicate filtering does not report RSSI changes,
+ * then restart scanning to ensure updated result with
+ * updated RSSI values.
+ */
+ if (test_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER,
+ &hdev->quirks))
+ restart_le_scan(hdev);
}
/* Append scan response data to event */
@@ -7376,6 +7411,14 @@ void mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
return;
}
+ /* Validate the reported RSSI value against the RSSI threshold once more
+ * incase HCI_QUIRK_STRICT_DUPLICATE_FILTER forced a restart of LE
+ * scanning.
+ */
+ if (hdev->discovery.rssi != HCI_RSSI_INVALID &&
+ rssi < hdev->discovery.rssi)
+ return;
+
ev->eir_len = cpu_to_le16(eir_len + scan_rsp_len);
ev_size = sizeof(*ev) + eir_len + scan_rsp_len;
--
2.2.0.rc0.207.ga3a616c