0x2B, 0x31 and 0x33 are reserved for future use but were not present in
the HCI to MGMT conversion table, this caused the conversion to be
incorrect for the HCI status code greater than 0x2A.
Reviewed-by: Miao-chen Chou <[email protected]>
Signed-off-by: Yu Liu <[email protected]>
---
Changes in v1:
- Initial change
net/bluetooth/mgmt.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 40f75b8e1416..b44e19c69c44 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -252,12 +252,15 @@ static const u8 mgmt_status_table[] = {
MGMT_STATUS_TIMEOUT, /* Instant Passed */
MGMT_STATUS_NOT_SUPPORTED, /* Pairing Not Supported */
MGMT_STATUS_FAILED, /* Transaction Collision */
+ MGMT_STATUS_FAILED, /* Reserved for future use */
MGMT_STATUS_INVALID_PARAMS, /* Unacceptable Parameter */
MGMT_STATUS_REJECTED, /* QoS Rejected */
MGMT_STATUS_NOT_SUPPORTED, /* Classification Not Supported */
MGMT_STATUS_REJECTED, /* Insufficient Security */
MGMT_STATUS_INVALID_PARAMS, /* Parameter Out Of Range */
+ MGMT_STATUS_FAILED, /* Reserved for future use */
MGMT_STATUS_BUSY, /* Role Switch Pending */
+ MGMT_STATUS_FAILED, /* Reserved for future use */
MGMT_STATUS_FAILED, /* Slot Violation */
MGMT_STATUS_FAILED, /* Role Switch Failed */
MGMT_STATUS_INVALID_PARAMS, /* EIR Too Large */
--
2.31.1.368.gbe11c130af-goog
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=469907
---Test result---
##############################
Test: CheckPatch - PASS
##############################
Test: CheckGitLint - PASS
##############################
Test: CheckBuildK - PASS
##############################
Test: CheckTestRunner: Setup - PASS
##############################
Test: CheckTestRunner: l2cap-tester - PASS
Total: 40, Passed: 34 (85.0%), Failed: 0, Not Run: 6
##############################
Test: CheckTestRunner: bnep-tester - PASS
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: mgmt-tester - PASS
Total: 416, Passed: 402 (96.6%), Failed: 0, Not Run: 14
##############################
Test: CheckTestRunner: rfcomm-tester - PASS
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: sco-tester - PASS
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: smp-tester - PASS
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: userchan-tester - PASS
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
---
Regards,
Linux Bluetooth
Hi Yu,
> 0x2B, 0x31 and 0x33 are reserved for future use but were not present in
> the HCI to MGMT conversion table, this caused the conversion to be
> incorrect for the HCI status code greater than 0x2A.
>
> Reviewed-by: Miao-chen Chou <[email protected]>
> Signed-off-by: Yu Liu <[email protected]>
> ---
>
> Changes in v1:
> - Initial change
>
> net/bluetooth/mgmt.c | 3 +++
> 1 file changed, 3 insertions(+)
patch has been applied to bluetooth-next tree.
Regards
Marcel