2011-06-12 10:35:27

by Francisco Ramos

Subject: Problems compiling obexd

Hello

Looks like some people are having problems compiling obexd downstream
(also with 0.40 version),
http://bugs.gentoo.org/show_bug.cgi?id=368135

I cannot reproduce myself but, googling a bit, looks like some other
people have this problem (but I still didn't find a solution).

The error is the following:

make -j4 -l3
make --no-print-directory all-am
CC client/pbap.o
CC client/sync.o
CC client/transfer.o
GEN client/obex-client.service
CC gdbus/mainloop.o
CC gdbus/watch.o
CC gdbus/object.o
CC gdbus/polkit.o
CC gwobex/gw-obex.o
CC gwobex/obex-priv.o
CC gwobex/obex-xfer.o
CC gwobex/utils.o
CC btio/btio.o
btio/btio.c: In function 'set_sec_level':
btio/btio.c:369: error: storage size of 'sec' isn't known
btio/btio.c:372: error: 'BT_SECURITY_LOW' undeclared (first use in this
function)
btio/btio.c:372: error: (Each undeclared identifier is reported only
once
btio/btio.c:372: error: for each function it appears in.)
btio/btio.c:372: error: 'BT_SECURITY_HIGH' undeclared (first use in this
function)
btio/btio.c:382: error: 'SOL_BLUETOOTH' undeclared (first use in this
function)
btio/btio.c:382: error: 'BT_SECURITY' undeclared (first use in this
function)
btio/btio.c: In function 'l2cap_get_lm':
btio/btio.c:416: error: 'BT_SECURITY_LOW' undeclared (first use in this
function)
btio/btio.c:418: error: 'BT_SECURITY_MEDIUM' undeclared (first use in
this function)
btio/btio.c:420: error: 'BT_SECURITY_HIGH' undeclared (first use in this
function)
btio/btio.c: In function 'rfcomm_get_lm':
btio/btio.c:437: error: 'BT_SECURITY_LOW' undeclared (first use in this
function)
btio/btio.c:439: error: 'BT_SECURITY_MEDIUM' undeclared (first use in
this function)
btio/btio.c:441: error: 'BT_SECURITY_HIGH' undeclared (first use in this
function)
btio/btio.c: In function 'get_sec_level':
btio/btio.c:449: error: storage size of 'sec' isn't known
btio/btio.c:455: error: 'SOL_BLUETOOTH' undeclared (first use in this
function)
btio/btio.c:455: error: 'BT_SECURITY' undeclared (first use in this
function)
btio/btio.c: In function 'parse_set_opts':
btio/btio.c:635: error: 'L2CAP_MODE_BASIC' undeclared (first use in this
function)
btio/btio.c: In function 'l2cap_get':
btio/btio.c:778: error: 'SOL_BLUETOOTH' undeclared (first use in this
function)
btio/btio.c:778: error: 'BT_DEFER_SETUP' undeclared (first use in this
function)
btio/btio.c: In function 'rfcomm_get':
btio/btio.c:885: error: 'SOL_BLUETOOTH' undeclared (first use in this
function)
btio/btio.c:885: error: 'BT_DEFER_SETUP' undeclared (first use in this
function)
btio/btio.c: In function 'bt_io_listen':
btio/btio.c:1282: error: 'SOL_BLUETOOTH' undeclared (first use in this
function)
btio/btio.c:1282: error: 'BT_DEFER_SETUP' undeclared (first use in this
function)
distcc[23546] ERROR: compile btio/btio.c on localhost failed
make[1]: *** [btio/btio.o] Error 1
make: *** [all] Error 2
make: INTERNAL: Exiting with 5 jobserver tokens available; should be 4!

Do you have any idea about where could the problem be?

Thanks a lot

2011-06-13 15:06:43

by Francisco Ramos

Subject: Re: Problems compiling obexd

El dom, 12-06-2011 a las 17:39 +0300, Luiz Augusto von Dentz escribió:
> Hi,
>
> On Sun, Jun 12, 2011 at 1:35 PM, Pacho Ramos <[email protected]> wrote:
> > Hello
> >
> > Looks like some people are having problems compiling obexd downstream
> > (also with 0.40 version),
> > http://bugs.gentoo.org/show_bug.cgi?id=368135
> >
> > I cannot reproduce myself but, googling a bit, looks like some other
> > people have this problem (but I still didn't find a solution).
> >
> > The error is the following:
> >
> > make -j4 -l3
> > make --no-print-directory all-am
> > CC client/pbap.o
> > CC client/sync.o
> > CC client/transfer.o
> > GEN client/obex-client.service
> > CC gdbus/mainloop.o
> > CC gdbus/watch.o
> > CC gdbus/object.o
> > CC gdbus/polkit.o
> > CC gwobex/gw-obex.o
> > CC gwobex/obex-priv.o
> > CC gwobex/obex-xfer.o
> > CC gwobex/utils.o
> > CC btio/btio.o
> > btio/btio.c: In function 'set_sec_level':
> > btio/btio.c:369: error: storage size of 'sec' isn't known
> > btio/btio.c:372: error: 'BT_SECURITY_LOW' undeclared (first use in this
> > function)
> > btio/btio.c:372: error: (Each undeclared identifier is reported only
> > once
> > btio/btio.c:372: error: for each function it appears in.)
> > btio/btio.c:372: error: 'BT_SECURITY_HIGH' undeclared (first use in this
> > function)
> > btio/btio.c:382: error: 'SOL_BLUETOOTH' undeclared (first use in this
> > function)
> > btio/btio.c:382: error: 'BT_SECURITY' undeclared (first use in this
> > function)
> > btio/btio.c: In function 'l2cap_get_lm':
> > btio/btio.c:416: error: 'BT_SECURITY_LOW' undeclared (first use in this
> > function)
> > btio/btio.c:418: error: 'BT_SECURITY_MEDIUM' undeclared (first use in
> > this function)
> > btio/btio.c:420: error: 'BT_SECURITY_HIGH' undeclared (first use in this
> > function)
> > btio/btio.c: In function 'rfcomm_get_lm':
> > btio/btio.c:437: error: 'BT_SECURITY_LOW' undeclared (first use in this
> > function)
> > btio/btio.c:439: error: 'BT_SECURITY_MEDIUM' undeclared (first use in
> > this function)
> > btio/btio.c:441: error: 'BT_SECURITY_HIGH' undeclared (first use in this
> > function)
> > btio/btio.c: In function 'get_sec_level':
> > btio/btio.c:449: error: storage size of 'sec' isn't known
> > btio/btio.c:455: error: 'SOL_BLUETOOTH' undeclared (first use in this
> > function)
> > btio/btio.c:455: error: 'BT_SECURITY' undeclared (first use in this
> > function)
> > btio/btio.c: In function 'parse_set_opts':
> > btio/btio.c:635: error: 'L2CAP_MODE_BASIC' undeclared (first use in this
> > function)
> > btio/btio.c: In function 'l2cap_get':
> > btio/btio.c:778: error: 'SOL_BLUETOOTH' undeclared (first use in this
> > function)
> > btio/btio.c:778: error: 'BT_DEFER_SETUP' undeclared (first use in this
> > function)
> > btio/btio.c: In function 'rfcomm_get':
> > btio/btio.c:885: error: 'SOL_BLUETOOTH' undeclared (first use in this
> > function)
> > btio/btio.c:885: error: 'BT_DEFER_SETUP' undeclared (first use in this
> > function)
> > btio/btio.c: In function 'bt_io_listen':
> > btio/btio.c:1282: error: 'SOL_BLUETOOTH' undeclared (first use in this
> > function)
> > btio/btio.c:1282: error: 'BT_DEFER_SETUP' undeclared (first use in this
> > function)
> > distcc[23546] ERROR: compile btio/btio.c on localhost failed
> > make[1]: *** [btio/btio.o] Error 1
> > make: *** [all] Error 2
> > make: INTERNAL: Exiting with 5 jobserver tokens available; should be 4!
> >
> > Do you have any idea about where could the problem be?
>
> It could be a very old libbluetooth which does not those symbols, what
> version are you using? Btw we do check for libbluetooth but don't
> depend have any version so we might have to fix that so in case like
> this configure should fail.
>
>

Thanks a lot, this was caused by an old bluez version installed
under /usr/local by users suffering this problem.

Best regards :-)

2011-06-12 14:39:12

by Luiz Augusto von Dentz

Subject: Re: Problems compiling obexd

Hi,

On Sun, Jun 12, 2011 at 1:35 PM, Pacho Ramos <[email protected]> wrote:
> Hello
>
> Looks like some people are having problems compiling obexd downstream
> (also with 0.40 version),
> http://bugs.gentoo.org/show_bug.cgi?id=368135
>
> ?I cannot reproduce myself but, googling a bit, looks like some other
> people have this problem (but I still didn't find a solution).
>
> The error is the following:
>
> make -j4 -l3
> make --no-print-directory all-am
> ?CC ? ? client/pbap.o
> ?CC ? ? client/sync.o
> ?CC ? ? client/transfer.o
> ?GEN ? ?client/obex-client.service
> ?CC ? ? gdbus/mainloop.o
> ?CC ? ? gdbus/watch.o
> ?CC ? ? gdbus/object.o
> ?CC ? ? gdbus/polkit.o
> ?CC ? ? gwobex/gw-obex.o
> ?CC ? ? gwobex/obex-priv.o
> ?CC ? ? gwobex/obex-xfer.o
> ?CC ? ? gwobex/utils.o
> ?CC ? ? btio/btio.o
> btio/btio.c: In function 'set_sec_level':
> btio/btio.c:369: error: storage size of 'sec' isn't known
> btio/btio.c:372: error: 'BT_SECURITY_LOW' undeclared (first use in this
> function)
> btio/btio.c:372: error: (Each undeclared identifier is reported only
> once
> btio/btio.c:372: error: for each function it appears in.)
> btio/btio.c:372: error: 'BT_SECURITY_HIGH' undeclared (first use in this
> function)
> btio/btio.c:382: error: 'SOL_BLUETOOTH' undeclared (first use in this
> function)
> btio/btio.c:382: error: 'BT_SECURITY' undeclared (first use in this
> function)
> btio/btio.c: In function 'l2cap_get_lm':
> btio/btio.c:416: error: 'BT_SECURITY_LOW' undeclared (first use in this
> function)
> btio/btio.c:418: error: 'BT_SECURITY_MEDIUM' undeclared (first use in
> this function)
> btio/btio.c:420: error: 'BT_SECURITY_HIGH' undeclared (first use in this
> function)
> btio/btio.c: In function 'rfcomm_get_lm':
> btio/btio.c:437: error: 'BT_SECURITY_LOW' undeclared (first use in this
> function)
> btio/btio.c:439: error: 'BT_SECURITY_MEDIUM' undeclared (first use in
> this function)
> btio/btio.c:441: error: 'BT_SECURITY_HIGH' undeclared (first use in this
> function)
> btio/btio.c: In function 'get_sec_level':
> btio/btio.c:449: error: storage size of 'sec' isn't known
> btio/btio.c:455: error: 'SOL_BLUETOOTH' undeclared (first use in this
> function)
> btio/btio.c:455: error: 'BT_SECURITY' undeclared (first use in this
> function)
> btio/btio.c: In function 'parse_set_opts':
> btio/btio.c:635: error: 'L2CAP_MODE_BASIC' undeclared (first use in this
> function)
> btio/btio.c: In function 'l2cap_get':
> btio/btio.c:778: error: 'SOL_BLUETOOTH' undeclared (first use in this
> function)
> btio/btio.c:778: error: 'BT_DEFER_SETUP' undeclared (first use in this
> function)
> btio/btio.c: In function 'rfcomm_get':
> btio/btio.c:885: error: 'SOL_BLUETOOTH' undeclared (first use in this
> function)
> btio/btio.c:885: error: 'BT_DEFER_SETUP' undeclared (first use in this
> function)
> btio/btio.c: In function 'bt_io_listen':
> btio/btio.c:1282: error: 'SOL_BLUETOOTH' undeclared (first use in this
> function)
> btio/btio.c:1282: error: 'BT_DEFER_SETUP' undeclared (first use in this
> function)
> distcc[23546] ERROR: compile btio/btio.c on localhost failed
> make[1]: *** [btio/btio.o] Error 1
> make: *** [all] Error 2
> make: INTERNAL: Exiting with 5 jobserver tokens available; should be 4!
>
> Do you have any idea about where could the problem be?

It could be a very old libbluetooth which does not those symbols, what
version are you using? Btw we do check for libbluetooth but don't
depend have any version so we might have to fix that so in case like
this configure should fail.


--
Luiz Augusto von Dentz
Computer Engineer