Dear list,
A folk is trying to qualify bluez and told that the following test would fail :
TP/BNEP/CTRL/BV-19-C. I searched the spec, errata and list archive. I haven't
found any informations or previous patch related to this test.
So I wrote a fix, but I think it shouldn't go upstream before it has been
validated and the folk cannot do that before next month. If anybody has access
to a test system sooner, please let me know.
Thanks,
Frédéric
Frédéric Dalleau (1):
network: Reply to extensions at connection setup
network/server.c | 34 ++++++++++++++++++++++++++++++++--
1 files changed, 32 insertions(+), 2 deletions(-)
--
1.7.5.4
Hi Frederic,
> > TP/BNEP/CTRL/BV-19-C is about extension in the
> BNEP_SETUP_CONN_REQ
> > control message. BNEP_SETUP_CONN_REQ is handled by
> bluetoothd before
> > giving control to kernel. Current bluez do not reply at all
> if an
> > extension is added to BNEP_SETUP_CONN_REQ. This patch fixes
> it by
> > sending COMMAND_NOT_UNDERSTOOD reply.
>
>
>
> is this really a good idea to just decline all extensions
> here?
>
> What happens to the filter setup done via these commands.
> Don't we need
> to process them inside the kernel to actually setup the
> filters.
>
> I have chosen to decline the extension because they are marked as not
> supported in all qualification listings that I have seen.
may that is the reason for it. Nevertheless no reason for us not to
support it.
> Processing extensions in the kernel is of course better, but both
> kernel and
> userspace needs changing, which is usually a much longer process. If
> preferred,
> I can do so.
I am fine with doing this as a first step. Since essentially if we run
on an older kernel, we need to do that anyway. We need to fallback
gracefully.
However I do like to see a plan for adding a new ioctl() to BNEP support
that allows us to include leftover unprocessed extensions.
Please consider Luiz comments since the patch is not really clean. We
need to make this more readable. Especially when it gets more complex
and becomes a fallback case.
Regards
Marcel
Hi Marcel,
On Tue, May 29, 2012 at 5:36 PM, Marcel Holtmann <[email protected]>wrote:
> > TP/BNEP/CTRL/BV-19-C is about extension in the BNEP_SETUP_CONN_REQ
> > control message. BNEP_SETUP_CONN_REQ is handled by bluetoothd before
> > giving control to kernel. Current bluez do not reply at all if an
> > extension is added to BNEP_SETUP_CONN_REQ. This patch fixes it by
> > sending COMMAND_NOT_UNDERSTOOD reply.
>
> is this really a good idea to just decline all extensions here?
>
> What happens to the filter setup done via these commands. Don't we need
> to process them inside the kernel to actually setup the filters.
>
I have chosen to decline the extension because they are marked as not
supported in all qualification listings that I have seen.
Processing extensions in the kernel is of course better, but both kernel
and
userspace needs changing, which is usually a much longer process. If
preferred,
I can do so.
Regards,
Fr?d?ric
Hi Frederic,
> TP/BNEP/CTRL/BV-19-C is about extension in the BNEP_SETUP_CONN_REQ
> control message. BNEP_SETUP_CONN_REQ is handled by bluetoothd before
> giving control to kernel. Current bluez do not reply at all if an
> extension is added to BNEP_SETUP_CONN_REQ. This patch fixes it by
> sending COMMAND_NOT_UNDERSTOOD reply.
>
> The test sends the following message :
> > ACL data: handle 11 flags 0x02 dlen 37
> L2CAP(d): cid 0x0040 len 33 [psm 15]
> BNEP: Control(0x01|1)
> Setup Req(0x01) size 0x02 dst 0x1116(NAP) src 0x1115(PANU)
> Ext Control(0x00|1) len 0x07
> Filter NetType Set(0x03) len 0x0004
> 0x8600 - 0x86dd
> Ext Control(0x00|0) len 0x0f
> Filter MultAddr Set(0x05) len 0x000c
> 03:00:00:20:00:00 - 03:00:00:20:00:00
>
> A reply must be provided to each of the extensions, the patch triggers
> the following answer:
> < ACL data: handle 12 flags 0x00 dlen 8
> L2CAP(d): cid 0x0040 len 4 [psm 15]
> BNEP: Control(0x01|0)
> Setup Rsp(0x02) res 0x0000
> < ACL data: handle 12 flags 0x00 dlen 7
> L2CAP(d): cid 0x0040 len 3 [psm 15]
> BNEP: Control(0x01|0)
> Not Understood(0x00) type 0x03
> < ACL data: handle 12 flags 0x00 dlen 7
> L2CAP(d): cid 0x0040 len 3 [psm 15]
> BNEP: Control(0x01|0)
> Not Understood(0x00) type 0x05
>
> The following command can be used for testing:
> printf "\x81\x01\x02\x11\x16\x11\x15\x80\x07\x03\x00\x04\x86\x00"\
> "\x86\xdd\x00\x0f\x05\x00\x0c\x03\x00\x00\x20\x00\x00\x03\x00\x00"\
> "\x20\x00\x00" > BNEP_CTRL_19.bin
> ./l2test -n -P 15 bb:dd:aa:dd:dd:rr -B BNEP_CTRL_19.bin -y
> ---
> network/server.c | 34 ++++++++++++++++++++++++++++++++--
> 1 files changed, 32 insertions(+), 2 deletions(-)
>
> diff --git a/network/server.c b/network/server.c
> index e39769a..d9bdb4f 100644
> --- a/network/server.c
> +++ b/network/server.c
> @@ -355,6 +355,7 @@ static gboolean bnep_setup(GIOChannel *chan,
> struct network_server *ns;
> uint8_t packet[BNEP_MTU];
> struct bnep_setup_conn_req *req = (void *) packet;
> + uint8_t *ext;
> uint16_t src_role, dst_role, rsp = BNEP_CONN_NOT_ALLOWED;
> int n, sk;
>
> @@ -377,7 +378,7 @@ static gboolean bnep_setup(GIOChannel *chan,
>
> /* Highest known Control command ID
> * is BNEP_FILTER_MULT_ADDR_RSP = 0x06 */
> - if (req->type == BNEP_CONTROL &&
> + if ((req->type & ~BNEP_EXT_HEADER) == BNEP_CONTROL &&
> req->ctrl > BNEP_FILTER_MULT_ADDR_RSP) {
> uint8_t pkt[3];
>
> @@ -390,7 +391,8 @@ static gboolean bnep_setup(GIOChannel *chan,
> return FALSE;
> }
>
> - if (req->type != BNEP_CONTROL || req->ctrl != BNEP_SETUP_CONN_REQ)
> + if ((req->type & ~BNEP_EXT_HEADER) != BNEP_CONTROL ||
> + req->ctrl != BNEP_SETUP_CONN_REQ)
> return FALSE;
>
> rsp = bnep_setup_decode(req, &dst_role, &src_role);
> @@ -427,6 +429,34 @@ static gboolean bnep_setup(GIOChannel *chan,
> reply:
> send_bnep_ctrl_rsp(sk, rsp);
>
> + /* Reply to extensions */
> + if (req->type & BNEP_EXT_HEADER) {
> + uint8_t pkt[3];
> + int l;
> +
> + l = 3 + 2 * req->uuid_size;
> + ext = packet + l;
> + n -= l;
> +
> +ext:
> + if (n <= 3)
> + return FALSE;
> +
> + pkt[0] = BNEP_CONTROL;
> + pkt[1] = BNEP_CMD_NOT_UNDERSTOOD;
> + pkt[2] = ext[2];
is this really a good idea to just decline all extensions here?
What happens to the filter setup done via these commands. Don't we need
to process them inside the kernel to actually setup the filters.
Regards
Marcel
Hi Fr?d?ric,
On Tue, May 29, 2012 at 1:19 PM, Fr?d?ric Dalleau
<[email protected]> wrote:
> + ? ? ? /* Reply to extensions */
> + ? ? ? if (req->type & BNEP_EXT_HEADER) {
> + ? ? ? ? ? ? ? uint8_t pkt[3];
> + ? ? ? ? ? ? ? int l;
> +
> + ? ? ? ? ? ? ? l = 3 + 2 * req->uuid_size;
> + ? ? ? ? ? ? ? ext = packet + l;
> + ? ? ? ? ? ? ? n -= l;
> +
> +ext:
> + ? ? ? ? ? ? ? if (n <= 3)
> + ? ? ? ? ? ? ? ? ? ? ? return FALSE;
> +
> + ? ? ? ? ? ? ? pkt[0] = BNEP_CONTROL;
> + ? ? ? ? ? ? ? pkt[1] = BNEP_CMD_NOT_UNDERSTOOD;
> + ? ? ? ? ? ? ? pkt[2] = ext[2];
> +
> + ? ? ? ? ? ? ? send(sk, pkt, sizeof(pkt), 0);
> +
> + ? ? ? ? ? ? ? if ((ext[0] & BNEP_EXT_HEADER) == 0)
> + ? ? ? ? ? ? ? ? ? ? ? return FALSE;
> +
> + ? ? ? ? ? ? ? l = 2 + ext[1];
> + ? ? ? ? ? ? ? ext += l;
> + ? ? ? ? ? ? ? n -= l;
> + ? ? ? ? ? ? ? goto ext;
> + ? ? ? }
> +
It looks bad to use goto backwards in the code, specially when you
could use a for loop or something like that. Maybe you should this
part in a separate function where you can initialize the variables and
responding to each extension request, also it would be useful to have
the structures of the extension so you can do sizeof and things like
that to avoid using magic numbers.
--
Luiz Augusto von Dentz
TP/BNEP/CTRL/BV-19-C is about extension in the BNEP_SETUP_CONN_REQ
control message. BNEP_SETUP_CONN_REQ is handled by bluetoothd before
giving control to kernel. Current bluez do not reply at all if an
extension is added to BNEP_SETUP_CONN_REQ. This patch fixes it by
sending COMMAND_NOT_UNDERSTOOD reply.
The test sends the following message :
> ACL data: handle 11 flags 0x02 dlen 37
L2CAP(d): cid 0x0040 len 33 [psm 15]
BNEP: Control(0x01|1)
Setup Req(0x01) size 0x02 dst 0x1116(NAP) src 0x1115(PANU)
Ext Control(0x00|1) len 0x07
Filter NetType Set(0x03) len 0x0004
0x8600 - 0x86dd
Ext Control(0x00|0) len 0x0f
Filter MultAddr Set(0x05) len 0x000c
03:00:00:20:00:00 - 03:00:00:20:00:00
A reply must be provided to each of the extensions, the patch triggers
the following answer:
< ACL data: handle 12 flags 0x00 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 15]
BNEP: Control(0x01|0)
Setup Rsp(0x02) res 0x0000
< ACL data: handle 12 flags 0x00 dlen 7
L2CAP(d): cid 0x0040 len 3 [psm 15]
BNEP: Control(0x01|0)
Not Understood(0x00) type 0x03
< ACL data: handle 12 flags 0x00 dlen 7
L2CAP(d): cid 0x0040 len 3 [psm 15]
BNEP: Control(0x01|0)
Not Understood(0x00) type 0x05
The following command can be used for testing:
printf "\x81\x01\x02\x11\x16\x11\x15\x80\x07\x03\x00\x04\x86\x00"\
"\x86\xdd\x00\x0f\x05\x00\x0c\x03\x00\x00\x20\x00\x00\x03\x00\x00"\
"\x20\x00\x00" > BNEP_CTRL_19.bin
./l2test -n -P 15 bb:dd:aa:dd:dd:rr -B BNEP_CTRL_19.bin -y
---
network/server.c | 34 ++++++++++++++++++++++++++++++++--
1 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/network/server.c b/network/server.c
index e39769a..d9bdb4f 100644
--- a/network/server.c
+++ b/network/server.c
@@ -355,6 +355,7 @@ static gboolean bnep_setup(GIOChannel *chan,
struct network_server *ns;
uint8_t packet[BNEP_MTU];
struct bnep_setup_conn_req *req = (void *) packet;
+ uint8_t *ext;
uint16_t src_role, dst_role, rsp = BNEP_CONN_NOT_ALLOWED;
int n, sk;
@@ -377,7 +378,7 @@ static gboolean bnep_setup(GIOChannel *chan,
/* Highest known Control command ID
* is BNEP_FILTER_MULT_ADDR_RSP = 0x06 */
- if (req->type == BNEP_CONTROL &&
+ if ((req->type & ~BNEP_EXT_HEADER) == BNEP_CONTROL &&
req->ctrl > BNEP_FILTER_MULT_ADDR_RSP) {
uint8_t pkt[3];
@@ -390,7 +391,8 @@ static gboolean bnep_setup(GIOChannel *chan,
return FALSE;
}
- if (req->type != BNEP_CONTROL || req->ctrl != BNEP_SETUP_CONN_REQ)
+ if ((req->type & ~BNEP_EXT_HEADER) != BNEP_CONTROL ||
+ req->ctrl != BNEP_SETUP_CONN_REQ)
return FALSE;
rsp = bnep_setup_decode(req, &dst_role, &src_role);
@@ -427,6 +429,34 @@ static gboolean bnep_setup(GIOChannel *chan,
reply:
send_bnep_ctrl_rsp(sk, rsp);
+ /* Reply to extensions */
+ if (req->type & BNEP_EXT_HEADER) {
+ uint8_t pkt[3];
+ int l;
+
+ l = 3 + 2 * req->uuid_size;
+ ext = packet + l;
+ n -= l;
+
+ext:
+ if (n <= 3)
+ return FALSE;
+
+ pkt[0] = BNEP_CONTROL;
+ pkt[1] = BNEP_CMD_NOT_UNDERSTOOD;
+ pkt[2] = ext[2];
+
+ send(sk, pkt, sizeof(pkt), 0);
+
+ if ((ext[0] & BNEP_EXT_HEADER) == 0)
+ return FALSE;
+
+ l = 2 + ext[1];
+ ext += l;
+ n -= l;
+ goto ext;
+ }
+
return FALSE;
}
--
1.7.5.4