---
doc/mgmt-api.txt | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
index 3f593f9..f7e760d 100644
--- a/doc/mgmt-api.txt
+++ b/doc/mgmt-api.txt
@@ -2811,6 +2811,31 @@ Start Limited Discovery Command
Invalid Index
+Set Appearance Command
+======================
+
+ Command Code: 0x0042
+ Controller Index: <controller id>
+ Command Parameters: Appearance (2 Octets)
+ Return Parameters: Appearance (2 Octets)
+
+ This command is used to set the appearance value of a controller.
+
+ This command can be used when the controller is not
+ powered and all settings will be programmed once powered.
+
+ The value of appearance will be remembered when switching
+ the controller off and back on again. So the appearance only
+ have to be set once when a new controller is found and will
+ stay until removed.
+
+ This command generates a Command Complete event on success
+ or a Command Status event on failure.
+
+ Possible errors: Invalid Parameters
+ Invalid Index
+
+
Command Complete Event
======================
@@ -3656,3 +3681,17 @@ Advertising Removed Event
The event will only be sent to management sockets other than the
one through which the command was sent.
+
+
+Appearance Changed Event
+========================
+
+ Event Code: 0x0025
+ Controller Index: <controller id>
+ Event Parameters: Appearance (2 Octets)
+
+ This event indicates that the appearance of the controller has
+ changed.
+
+ The event will only be sent to management sockets other than the
+ one through which the command was sent.
--
2.7.4
Hi Marcel,
On 23 August 2016 at 14:06, Marcel Holtmann <[email protected]> wrote:
> Hi Michal,
>
>> ---
>> doc/mgmt-api.txt | 39 +++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 39 insertions(+)
>>
>> diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
>> index 3f593f9..f7e760d 100644
>> --- a/doc/mgmt-api.txt
>> +++ b/doc/mgmt-api.txt
>> @@ -2811,6 +2811,31 @@ Start Limited Discovery Command
>> Invalid Index
>>
>>
>> +Set Appearance Command
>> +======================
>> +
>> + Command Code: 0x0042
>> + Controller Index: <controller id>
>> + Command Parameters: Appearance (2 Octets)
>> + Return Parameters: Appearance (2 Octets)
>> +
>> + This command is used to set the appearance value of a controller.
>> +
>> + This command can be used when the controller is not
>> + powered and all settings will be programmed once powered.
>> +
>> + The value of appearance will be remembered when switching
>> + the controller off and back on again. So the appearance only
>> + have to be set once when a new controller is found and will
>> + stay until removed.
>> +
>> + This command generates a Command Complete event on success
>> + or a Command Status event on failure.
>> +
>> + Possible errors: Invalid Parameters
>> + Invalid Index
>
> what is this good for?
This is needed to handle appearance flag in "Add Advertising" as well as
being able to generate LE OOB data with it.
--
pozdrawiam
Szymon K. Janc
Hi Michal,
> ---
> doc/mgmt-api.txt | 39 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
> index 3f593f9..f7e760d 100644
> --- a/doc/mgmt-api.txt
> +++ b/doc/mgmt-api.txt
> @@ -2811,6 +2811,31 @@ Start Limited Discovery Command
> Invalid Index
>
>
> +Set Appearance Command
> +======================
> +
> + Command Code: 0x0042
> + Controller Index: <controller id>
> + Command Parameters: Appearance (2 Octets)
> + Return Parameters: Appearance (2 Octets)
> +
> + This command is used to set the appearance value of a controller.
> +
> + This command can be used when the controller is not
> + powered and all settings will be programmed once powered.
> +
> + The value of appearance will be remembered when switching
> + the controller off and back on again. So the appearance only
> + have to be set once when a new controller is found and will
> + stay until removed.
> +
> + This command generates a Command Complete event on success
> + or a Command Status event on failure.
> +
> + Possible errors: Invalid Parameters
> + Invalid Index
what is this good for?
Regards
Marcel