2022-11-16 02:40:16

by Gongwei Li

[permalink] [raw]
Subject: [PATCH -next] Bluetooth: btusb: Add a new PID/VID 13d3/3549 for RTL8822CU

From: ligongwei <[email protected]>

* /sys/kernel/debug/usb/devices
T: Bus=03 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=b85b Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms

Signed-off-by: ligongwei <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
---
drivers/bluetooth/btusb.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 64a3febb9dec..437d0b53efe7 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -498,6 +498,10 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0bda, 0xc822), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },

+ /* Realtek 8822CU Bluetooth devices */
+ { USB_DEVICE(0x13d3, 0x3549), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
+
/* Realtek 8852AE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0x2852), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
--
2.25.1



2022-11-16 04:41:04

by bluez.test.bot

[permalink] [raw]
Subject: RE: [-next] Bluetooth: btusb: Add a new PID/VID 13d3/3549 for RTL8822CU

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=695778

---Test result---

Test Summary:
CheckPatch PASS 1.41 seconds
GitLint PASS 0.87 seconds
SubjectPrefix PASS 0.66 seconds
BuildKernel PASS 42.27 seconds
BuildKernel32 PASS 37.06 seconds
Incremental Build with patchesPASS 59.56 seconds
TestRunner: Setup PASS 609.40 seconds
TestRunner: l2cap-tester PASS 19.90 seconds
TestRunner: iso-tester PASS 19.40 seconds
TestRunner: bnep-tester PASS 7.72 seconds
TestRunner: mgmt-tester PASS 121.81 seconds
TestRunner: rfcomm-tester PASS 11.99 seconds
TestRunner: sco-tester PASS 11.40 seconds
TestRunner: ioctl-tester PASS 12.78 seconds
TestRunner: mesh-tester PASS 9.26 seconds
TestRunner: smp-tester PASS 11.24 seconds
TestRunner: userchan-tester PASS 8.09 seconds



---
Regards,
Linux Bluetooth

2022-11-18 04:15:48

by bluez.test.bot

[permalink] [raw]
Subject: RE: [-next] Bluetooth: btusb: Add a new PID/VID 13d3/3549 for RTL8822CU

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=695778

---Test result---

Test Summary:
CheckPatch PASS 0.66 seconds
GitLint PASS 0.33 seconds
SubjectPrefix PASS 0.11 seconds
BuildKernel PASS 33.66 seconds
BuildKernel32 PASS 30.43 seconds
TestRunnerSetup PASS 415.53 seconds
TestRunner_l2cap-tester PASS 15.65 seconds
TestRunner_iso-tester PASS 14.83 seconds
TestRunner_bnep-tester PASS 5.25 seconds
TestRunner_mgmt-tester PASS 102.70 seconds
TestRunner_rfcomm-tester PASS 8.94 seconds
TestRunner_sco-tester PASS 8.50 seconds
TestRunner_ioctl-tester PASS 9.74 seconds
TestRunner_mesh-tester PASS 6.56 seconds
TestRunner_smp-tester PASS 8.31 seconds
TestRunner_userchan-tester PASS 5.53 seconds
IncrementalBuild PASS 30.70 seconds



---
Regards,
Linux Bluetooth

2022-11-29 21:09:41

by Luiz Augusto von Dentz

[permalink] [raw]
Subject: Re: [PATCH -next] Bluetooth: btusb: Add a new PID/VID 13d3/3549 for RTL8822CU

Hi Jinchuan,

On Tue, Nov 15, 2022 at 6:38 PM jinchuan li <[email protected]> wrote:
>
> From: ligongwei <[email protected]>
>
> * /sys/kernel/debug/usb/devices
> T: Bus=03 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0bda ProdID=b85b Rev= 0.00
> S: Manufacturer=Realtek
> S: Product=Bluetooth Radio
> S: SerialNumber=00e04c000001
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> Signed-off-by: ligongwei <[email protected]>

You should probably configure your email with your full name.

> Signed-off-by: Marcel Holtmann <[email protected]>

@Marcel Holtmann Did you really signed-off this one?

> ---
> drivers/bluetooth/btusb.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 64a3febb9dec..437d0b53efe7 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -498,6 +498,10 @@ static const struct usb_device_id blacklist_table[] = {
> { USB_DEVICE(0x0bda, 0xc822), .driver_info = BTUSB_REALTEK |
> BTUSB_WIDEBAND_SPEECH },
>
> + /* Realtek 8822CU Bluetooth devices */
> + { USB_DEVICE(0x13d3, 0x3549), .driver_info = BTUSB_REALTEK |
> + BTUSB_WIDEBAND_SPEECH },
> +
> /* Realtek 8852AE Bluetooth devices */
> { USB_DEVICE(0x0bda, 0x2852), .driver_info = BTUSB_REALTEK |
> BTUSB_WIDEBAND_SPEECH },
> --
> 2.25.1
>


--
Luiz Augusto von Dentz