This patch set addressed further feedback:
* v2:
- Added a "NotAuthorized" error for the ReadValue/WriteValue methods. This
is in addition to the "NotPaired" error.
- Added a "InvalidValueLength" error to the WriteValue methods.
Arman Uguray (1):
doc/gatt-api: New API properties and methods for the GATT D-Bus API.
doc/gatt-api.txt | 122 +++++++++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 110 insertions(+), 12 deletions(-)
--
2.0.0.526.g5318336
Hi Arman,
> This patch introduces the following new properties to the GattService1
> interface:
>
> Device: A remote-service-only property that contains the D-Bus object
> path of the associated device.
>
> Primary: Reflects whether or not a services is primary or secondary.
>
> This patch also introduces new methods to GattCharacteristic1 and
> GattDescriptor1 for reading and writing the corresponding attribute
> values and a new signal for being notified of received notifications and
> indications.
>
> The "Value" D-Bus property is removed from both interfaces
> and replaced with asynchronous ReadValue and WriteValue functions. This
> is due to the fact that DBus.Properties.Get is synchronous and without
> an asynchronous way of issuing a GATT value read request, there are
> cases where a single read and cache based approach becomes limiting
> (e.g. when a characteristic allows reads but no notifications) and
> relying on the PropertyChanged signal to retrieve the value of a read
> request asynchonously as well as to signal notifications/indications
> makes for a vague API.
> ---
> doc/gatt-api.txt | 124 +++++++++++++++++++++++++++++++++++++++++++++++++------
> 1 file changed, 112 insertions(+), 12 deletions(-)
patch has been applied.
Regards
Marcel
Hi Marcel,
> I honestly forgot where we left off with this. I remember vaguely that the patch for the API document should got upstream, but I do not remember if it was this version or not. It also seems that neither Johan nor Luiz picked it up.
>
The latest patch set was v2 (which is this one). I think I addressed
all the concerns from the last two patches here though haven't heard
from anyone since then.
Thanks,
-Arman
Hi Arman,
> This patch introduces the following new properties to the GattService1
> interface:
>
> Device: A remote-service-only property that contains the D-Bus object
> path of the associated device.
>
> Primary: Reflects whether or not a services is primary or secondary.
>
> This patch also introduces new methods to GattCharacteristic1 and
> GattDescriptor1 for reading and writing the corresponding attribute
> values and a new signal for being notified of received notifications and
> indications.
>
> The "Value" D-Bus property is removed from both interfaces
> and replaced with asynchronous ReadValue and WriteValue functions. This
> is due to the fact that DBus.Properties.Get is synchronous and without
> an asynchronous way of issuing a GATT value read request, there are
> cases where a single read and cache based approach becomes limiting
> (e.g. when a characteristic allows reads but no notifications) and
> relying on the PropertyChanged signal to retrieve the value of a read
> request asynchonously as well as to signal notifications/indications
> makes for a vague API.
> ---
> doc/gatt-api.txt | 124 +++++++++++++++++++++++++++++++++++++++++++++++++------
> 1 file changed, 112 insertions(+), 12 deletions(-)
I honestly forgot where we left off with this. I remember vaguely that the patch for the API document should got upstream, but I do not remember if it was this version or not. It also seems that neither Johan nor Luiz picked it up.
Regards
Marcel
Hi Chaojie,
> Following your new proposal to implement, there is one details that I missed before which condition the services would set up under the local remote device. I think this "optional" maybe is not essential. Gatt Hiearchy should always set up when it connected to remote devices.
>
I marked it as optional since it only applies when BlueZ is the
central. If BlueZ is acting as a server for services that are
registered through GattManager1, then this property doesn't make much
sense. Even though the server-side implementation won't happen for
some time, the idea is that server and client D-Bus APIs will use the
same interface definitions.
Thanks,
Arman
Hi Arman,
> +
> + object Device [read-only, optional]
> +
> + Object path of the Bluetooth device the service
> + belongs to. Only present on services from remote
> + devices.
Following your new proposal to implement, there is one details that I missed before which condition the services would set up under the local remote device. I think this "optional" maybe is not essential. Gatt Hiearchy should always set up when it connected to remote devices.
Thanks
Chaojie Gu
This patch introduces the following new properties to the GattService1
interface:
Device: A remote-service-only property that contains the D-Bus object
path of the associated device.
Primary: Reflects whether or not a services is primary or secondary.
This patch also introduces new methods to GattCharacteristic1 and
GattDescriptor1 for reading and writing the corresponding attribute
values and a new signal for being notified of received notifications and
indications.
The "Value" D-Bus property is removed from both interfaces
and replaced with asynchronous ReadValue and WriteValue functions. This
is due to the fact that DBus.Properties.Get is synchronous and without
an asynchronous way of issuing a GATT value read request, there are
cases where a single read and cache based approach becomes limiting
(e.g. when a characteristic allows reads but no notifications) and
relying on the PropertyChanged signal to retrieve the value of a read
request asynchonously as well as to signal notifications/indications
makes for a vague API.
---
doc/gatt-api.txt | 124 +++++++++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 112 insertions(+), 12 deletions(-)
diff --git a/doc/gatt-api.txt b/doc/gatt-api.txt
index 8c7975c..f7125a2 100644
--- a/doc/gatt-api.txt
+++ b/doc/gatt-api.txt
@@ -32,6 +32,25 @@ Properties string UUID [read-only]
128-bit service UUID.
+ boolean Primary [read-only]
+
+ Indicates whether or not this GATT service is a
+ primary service. If false, the service is secondary.
+
+ object Device [read-only, optional]
+
+ Object path of the Bluetooth device the service
+ belongs to. Only present on services from remote
+ devices.
+
+ array{object} Characteristics [read-only]
+
+ Array of object paths representing the characteristics
+ of this service. This property is set only when the
+ characteristic discovery has been completed, however the
+ characteristic objects will become available via
+ ObjectManager as soon as they get discovered.
+
array{object} Includes [read-only]: Not implemented
Array of object paths representing the included
@@ -48,6 +67,50 @@ Service org.bluez
Interface org.bluez.GattCharacteristic1 [Experimental]
Object path [variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX/serviceXX/charYYYY
+Methods array{byte} ReadValue()
+
+ Issues a request to read the value of the
+ characteristic and returns the value if the
+ operation was successful.
+
+ Possible Errors: org.bluez.Error.Failed
+ org.bluez.Error.InProgress
+ org.bluez.Error.ReadNotPermitted
+ org.bluez.Error.NotAuthorized
+ org.bluez.Error.NotPaired
+ org.bluez.Error.NotSupported
+
+ void WriteValue(array{byte} value)
+
+ Issues a request to write the value of the
+ characteristic.
+
+ Possible Errors: org.bluez.Error.Failed
+ org.bluez.Error.InProgress
+ org.bluez.Error.WriteNotPermitted
+ org.bluez.Error.InvalidValueLength
+ org.bluez.Error.NotAuthorized
+ org.bluez.Error.NotPaired
+ org.bluez.Error.NotSupported
+
+ void StartNotify()
+
+ Starts a notification session from this characteristic
+ if it supports value notifications or indications.
+
+ Possible Errors: org.bluez.Error.Failed
+ org.bluez.Error.InProgress
+ org.bluez.Error.NotSupported
+
+ void StopNotify()
+
+ This method will cancel any previous StartNotify
+ transaction. Note that notifications from a
+ characteristic are shared between sessions thus
+ calling StopNotify will release a single session.
+
+ Possible Errors: org.bluez.Error.Failed
+
Properties string UUID [read-only]
128-bit characteristic UUID.
@@ -57,12 +120,19 @@ Properties string UUID [read-only]
Object path of the GATT service the characteristc
belongs to.
- array{byte} Value [read-write]
+ array{byte} Value [read-only, optional]
+
+ The cached value of the characteristic. This property
+ gets updated only after a successful read request and
+ when a notification or indication is received, upon
+ which a PropertiesChanged signal will be emitted.
- Value read from the remote Bluetooth device or from
- the external application implementing GATT services.
+ boolean Notifying [read-only]
- array{string} Flags [read-only, optional]
+ True, if notifications or indications on this
+ characteristic are currently enabled.
+
+ array{string} Flags [read-only]
Defines how the characteristic value can be used. See
Core spec "Table 3.5: Characteristic Properties bit
@@ -79,6 +149,14 @@ Properties string UUID [read-only]
"reliable-write"
"writable-auxiliaries"
+ array{object} Descriptors [read-only]
+
+ Array of object paths representing the descriptors
+ of this service. This property is set only when the
+ descriptor discovery has been completed, however the
+ descriptor objects will become available via
+ ObjectManager as soon as they get discovered.
+
Characteristic Descriptors hierarchy
====================================
@@ -89,6 +167,32 @@ Service org.bluez
Interface org.bluez.GattDescriptor1 [Experimental]
Object path [variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX/serviceXX/charYYYY/descriptorZZZ
+Methods array{byte} ReadValue()
+
+ Issues a request to read the value of the
+ characteristic and returns the value if the
+ operation was successful.
+
+ Possible Errors: org.bluez.Error.Failed
+ org.bluez.Error.InProgress
+ org.bluez.Error.ReadNotPermitted
+ org.bluez.Error.NotAuthorized
+ org.bluez.Error.NotPaired
+ org.bluez.Error.NotSupported
+
+ void WriteValue(array{byte} value)
+
+ Issues a request to write the value of the
+ characteristic.
+
+ Possible Errors: org.bluez.Error.Failed
+ org.bluez.Error.InProgress
+ org.bluez.Error.WriteNotPermitted
+ org.bluez.Error.InvalidValueLength
+ org.bluez.Error.NotAuthorized
+ org.bluez.Error.NotPaired
+ org.bluez.Error.NotSupported
+
Properties string UUID [read-only]
128-bit descriptor UUID.
@@ -98,16 +202,12 @@ Properties string UUID [read-only]
Object path of the GATT characteristc the descriptor
belongs to.
- array{byte} Value [read-write]
-
- Raw characteristic descriptor value read from the
- remote Bluetooth device or from the external
- application implementing GATT services.
+ array{byte} Value [read-only, optional]
- string Permissions [read-only]: To be defined
+ The cached value of the descriptor. This property
+ gets updated only after a successful read request, upon
+ which a PropertiesChanged signal will be emitted.
- Defines read/write authentication and authorization
- requirements.
Service Manager hierarchy
=============================
--
2.0.0.526.g5318336