This device declares itself to be vendor specific
It therefore needs to be added to the device table
to make btusb bind.
Signed-off-by: Cho, Yu-Chen <[email protected]>
---
drivers/bluetooth/btusb.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index abfc4ee..5893ba4 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -97,6 +97,10 @@ static struct usb_device_id btusb_table[] = {
/* Ericsson with non-standard id */
{ USB_DEVICE(0x0bdb, 0x1002) },
+ /* Broadcom 20702 Bluetooth 4.0 Adapter */
+ /* Broadcom Valentine 802.11bgn 1x1 Combo HMC */
+ { USB_DEVICE(0xa5c, 0x21e3) },
+
/* Canyon CN-BTU1 with HID interfaces */
{ USB_DEVICE(0x0c10, 0x0000) },
--
1.7.3.4
Hi Yu-Chen,
* Cho, Yu-Chen <[email protected]> [2011-10-20 12:58:29 +0800]:
> This device declares itself to be vendor specific
> It therefore needs to be added to the device table
> to make btusb bind.
It would be good to have the output of usb-devices for this specific device in
the commit message.
Gustavo
Fixed the device VID:PID typo 05ac:21e1 to 0a5c:21e1
Signed-off-by: Cho, Yu-Chen <[email protected]>
---
drivers/bluetooth/btusb.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 5893ba4..1877e91 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -60,9 +60,6 @@ static struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
- /* Broadcom SoftSailing reporting vendor specific */
- { USB_DEVICE(0x05ac, 0x21e1) },
-
/* Apple MacBookPro 7,1 */
{ USB_DEVICE(0x05ac, 0x8213) },
@@ -98,6 +95,8 @@ static struct usb_device_id btusb_table[] = {
{ USB_DEVICE(0x0bdb, 0x1002) },
/* Broadcom 20702 Bluetooth 4.0 Adapter */
+ /* Broadcom SoftSailing reporting vendor specific */
+ { USB_DEVICE(0xa5c, 0x21e1) },
/* Broadcom Valentine 802.11bgn 1x1 Combo HMC */
{ USB_DEVICE(0xa5c, 0x21e3) },
--
1.7.3.4
Hi Al,
> > * Cho, Yu-Chen <[email protected]> [2011-10-20 12:58:29 +0800]:
> >
> >> This device declares itself to be vendor specific
> >> It therefore needs to be added to the device table
> >> to make btusb bind.
> >
> > It would be good to have the output of usb-devices for this specific device in
> > the commit message.
>
> Would you please kindly explain what is "the output of usb-device" to me?
> The patch is for Broadcom Valentine 802.11bgn 1x1 wireless and
> bluetooth combo card.
open an xterm and type "usb-devices", then press return. And we want to
see the part about this device.
Regards
Marcel
Hi Gustavo,
Sorry for late to reply,
On Tue, Nov 1, 2011 at 3:18 AM, Gustavo Padovan <[email protected]> wrote:
> Hi Yu-Chen,
>
> * Cho, Yu-Chen <[email protected]> [2011-10-20 12:58:29 +0800]:
>
>> This device declares itself to be vendor specific
>> It therefore needs to be added to the device table
>> to make btusb bind.
>
> It would be good to have the output of usb-devices for this specific device in
> the commit message.
Would you please kindly explain what is "the output of usb-device" to me?
The patch is for Broadcom Valentine 802.11bgn 1x1 wireless and
bluetooth combo card.
Thanks,
AL
On Wed, Nov 16, 2011 at 5:19 PM, Marcel Holtmann <[email protected]> wrote:
> Hi Al,
>
>> > * Cho, Yu-Chen <[email protected]> [2011-10-20 12:58:29 +0800]:
>> >
>> >> This device declares itself to be vendor specific
>> >> It therefore needs to be added to the device table
>> >> to make btusb bind.
>> >
>> > It would be good to have the output of usb-devices for this specific device in
>> > the commit message.
>>
>> Would you please kindly explain what is "the output of usb-device" to me?
>> The patch is for Broadcom Valentine 802.11bgn 1x1 wireless and
>> bluetooth combo card.
>
> open an xterm and type "usb-devices", then press return. And we want to
> see the part about this device.
>
> Regards
>
> Marcel
>
>
>
Hi All,
Really sorry for late to reply again.
List the information below:
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21e3 Rev= 1.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=889FFAABE086
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Sincerely,
AL