From: Yun-Hao Chung <[email protected]>
The time check in device lost timeout could cause DeviceLost never being
reported because of the following reasons:
1. Timer created in timeout_add_seconds, which calls
g_timeout_add_seconds_full internally, can be fired one second
earlier than |timeout| seconds.
2. When handle_device_lost_timeout is invoked early, time diff between
|curr_time| and |last_seen| could be less than |low_rssi_timeout|. In
this case, since handle_device_lost always returns FALSE, the
timer will be removed, but DeviceLost has not been reported yet.
3. If we never receives any advertisement from that peer since then,
DeviceLost will never be reported.
We can remove the checking in handle_device_lost_time because we restart
or remove the timer whenever an advertisement is received.
Reviewed-by: [email protected]
Reviewed-by: [email protected]
Reviewed-by: [email protected]
---
Changes in v2:
- Fix spelling errors
src/adv_monitor.c | 27 ++++++---------------------
1 file changed, 6 insertions(+), 21 deletions(-)
diff --git a/src/adv_monitor.c b/src/adv_monitor.c
index 17f1777eb1da..715ac5904b9a 100644
--- a/src/adv_monitor.c
+++ b/src/adv_monitor.c
@@ -1884,31 +1884,16 @@ static bool handle_device_lost_timeout(gpointer user_data)
{
struct adv_monitor_device *dev = user_data;
struct adv_monitor *monitor = dev->monitor;
- time_t curr_time = time(NULL);
- DBG("Device Lost timeout triggered for device %p "
- "for the Adv Monitor at path %s", dev->device, monitor->path);
+ DBG("Device Lost timeout triggered for device %p. Calling DeviceLost() "
+ "on Adv Monitor of owner %s at path %s", dev->device,
+ monitor->app->owner, monitor->path);
+ g_dbus_proxy_method_call(monitor->proxy, "DeviceLost",
+ report_device_state_setup,
+ NULL, dev->device, NULL);
dev->lost_timer = 0;
- if (dev->found && dev->last_seen) {
- /* We were tracking for the Low RSSI filter. Check if there is
- * any Adv received after the timeout function is invoked.
- * If not, report the Device Lost event.
- */
- if (difftime(curr_time, dev->last_seen) >=
- monitor->rssi.low_rssi_timeout) {
- dev->found = false;
-
- DBG("Calling DeviceLost() on Adv Monitor of owner %s "
- "at path %s", monitor->app->owner, monitor->path);
-
- g_dbus_proxy_method_call(monitor->proxy, "DeviceLost",
- report_device_state_setup,
- NULL, dev->device, NULL);
- }
- }
-
return FALSE;
}
--
2.32.0.93.g670b81a890-goog
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=507773
---Test result---
Test Summary:
CheckPatch PASS 0.69 seconds
GitLint PASS 0.14 seconds
Prep - Setup ELL PASS 47.87 seconds
Build - Prep PASS 0.11 seconds
Build - Configure PASS 8.22 seconds
Build - Make PASS 204.47 seconds
Make Check PASS 9.06 seconds
Make Distcheck PASS 241.25 seconds
Build w/ext ELL - Configure PASS 8.28 seconds
Build w/ext ELL - Make PASS 192.03 seconds
Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf
##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint
##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL
##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build
##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree
##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree
##############################
Test: Make Check - PASS
Desc: Run 'make check'
##############################
Test: Make Distcheck - PASS
Desc: Run distcheck to check the distribution
##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration
##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration
---
Regards,
Linux Bluetooth
Gentle ping.
On Mon, Jun 28, 2021 at 12:02 PM <[email protected]> wrote:
>
> This is automated email and please do not reply to this email!
>
> Dear submitter,
>
> Thank you for submitting the patches to the linux bluetooth mailing list.
> This is a CI test results with your patch series:
> PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=507773
>
> ---Test result---
>
> Test Summary:
> CheckPatch PASS 0.69 seconds
> GitLint PASS 0.14 seconds
> Prep - Setup ELL PASS 47.87 seconds
> Build - Prep PASS 0.11 seconds
> Build - Configure PASS 8.22 seconds
> Build - Make PASS 204.47 seconds
> Make Check PASS 9.06 seconds
> Make Distcheck PASS 241.25 seconds
> Build w/ext ELL - Configure PASS 8.28 seconds
> Build w/ext ELL - Make PASS 192.03 seconds
>
> Details
> ##############################
> Test: CheckPatch - PASS
> Desc: Run checkpatch.pl script with rule in .checkpatch.conf
>
> ##############################
> Test: GitLint - PASS
> Desc: Run gitlint with rule in .gitlint
>
> ##############################
> Test: Prep - Setup ELL - PASS
> Desc: Clone, build, and install ELL
>
> ##############################
> Test: Build - Prep - PASS
> Desc: Prepare environment for build
>
> ##############################
> Test: Build - Configure - PASS
> Desc: Configure the BlueZ source tree
>
> ##############################
> Test: Build - Make - PASS
> Desc: Build the BlueZ source tree
>
> ##############################
> Test: Make Check - PASS
> Desc: Run 'make check'
>
> ##############################
> Test: Make Distcheck - PASS
> Desc: Run distcheck to check the distribution
>
> ##############################
> Test: Build w/ext ELL - Configure - PASS
> Desc: Configure BlueZ source with '--enable-external-ell' configuration
>
> ##############################
> Test: Build w/ext ELL - Make - PASS
> Desc: Build BlueZ source with '--enable-external-ell' configuration
>
>
>
> ---
> Regards,
> Linux Bluetooth
>
Hi,
On Wed, Jul 7, 2021 at 7:35 PM Yun-hao Chung <[email protected]> wrote:
>
> Gentle ping.
>
> On Mon, Jun 28, 2021 at 12:02 PM <[email protected]> wrote:
> >
> > This is automated email and please do not reply to this email!
> >
> > Dear submitter,
> >
> > Thank you for submitting the patches to the linux bluetooth mailing list.
> > This is a CI test results with your patch series:
> > PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=507773
> >
> > ---Test result---
> >
> > Test Summary:
> > CheckPatch PASS 0.69 seconds
> > GitLint PASS 0.14 seconds
> > Prep - Setup ELL PASS 47.87 seconds
> > Build - Prep PASS 0.11 seconds
> > Build - Configure PASS 8.22 seconds
> > Build - Make PASS 204.47 seconds
> > Make Check PASS 9.06 seconds
> > Make Distcheck PASS 241.25 seconds
> > Build w/ext ELL - Configure PASS 8.28 seconds
> > Build w/ext ELL - Make PASS 192.03 seconds
> >
> > Details
> > ##############################
> > Test: CheckPatch - PASS
> > Desc: Run checkpatch.pl script with rule in .checkpatch.conf
> >
> > ##############################
> > Test: GitLint - PASS
> > Desc: Run gitlint with rule in .gitlint
> >
> > ##############################
> > Test: Prep - Setup ELL - PASS
> > Desc: Clone, build, and install ELL
> >
> > ##############################
> > Test: Build - Prep - PASS
> > Desc: Prepare environment for build
> >
> > ##############################
> > Test: Build - Configure - PASS
> > Desc: Configure the BlueZ source tree
> >
> > ##############################
> > Test: Build - Make - PASS
> > Desc: Build the BlueZ source tree
> >
> > ##############################
> > Test: Make Check - PASS
> > Desc: Run 'make check'
> >
> > ##############################
> > Test: Make Distcheck - PASS
> > Desc: Run distcheck to check the distribution
> >
> > ##############################
> > Test: Build w/ext ELL - Configure - PASS
> > Desc: Configure BlueZ source with '--enable-external-ell' configuration
> >
> > ##############################
> > Test: Build w/ext ELL - Make - PASS
> > Desc: Build BlueZ source with '--enable-external-ell' configuration
> >
> >
> >
> > ---
> > Regards,
> > Linux Bluetooth
> >
Applied, thanks.
--
Luiz Augusto von Dentz