From: Yun-Hao Chung <[email protected]>
When RFCOMM_TEST_EA returns false, btmon assumes packet data has at
least 5 bytes long. If that assumption fails, btmon could crash when
trying to read the next byte.
This patch fix it by checking the remaining size before reading the last
byte.
Reviewed-by: [email protected]
---
monitor/rfcomm.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/monitor/rfcomm.c b/monitor/rfcomm.c
index 9b88a3440e31..76b1123bb23d 100644
--- a/monitor/rfcomm.c
+++ b/monitor/rfcomm.c
@@ -452,6 +452,9 @@ void rfcomm_packet(const struct l2cap_frame *frame)
hdr.length = GET_LEN16(hdr.length);
}
+ if (l2cap_frame->size == 0)
+ goto fail;
+
l2cap_frame_pull(&tmp_frame, l2cap_frame, l2cap_frame->size-1);
if (!l2cap_frame_get_u8(&tmp_frame, &hdr.fcs))
--
2.31.1.607.g51e8a6a459-goog
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=480043
---Test result---
Test Summary:
CheckPatch PASS 0.27 seconds
GitLint PASS 0.10 seconds
Prep - Setup ELL PASS 39.28 seconds
Build - Prep PASS 0.10 seconds
Build - Configure PASS 7.20 seconds
Build - Make PASS 169.18 seconds
Make Check PASS 8.61 seconds
Make Dist PASS 11.36 seconds
Make Dist - Configure PASS 4.52 seconds
Make Dist - Make PASS 70.51 seconds
Build w/ext ELL - Configure PASS 7.17 seconds
Build w/ext ELL - Make PASS 156.78 seconds
Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf
##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint
##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL
##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build
##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree
##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree
##############################
Test: Make Check - PASS
Desc: Run 'make check'
##############################
Test: Make Dist - PASS
Desc: Run 'make dist' and build the distribution tarball
##############################
Test: Make Dist - Configure - PASS
Desc: Configure the source from distribution tarball
##############################
Test: Make Dist - Make - PASS
Desc: Build the source from distribution tarball
##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration
##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration
---
Regards,
Linux Bluetooth
Hi Howard,
On Tue, May 11, 2021 at 12:28 AM Howard Chung <[email protected]> wrote:
>
> From: Yun-Hao Chung <[email protected]>
>
> When RFCOMM_TEST_EA returns false, btmon assumes packet data has at
> least 5 bytes long. If that assumption fails, btmon could crash when
> trying to read the next byte.
> This patch fix it by checking the remaining size before reading the last
> byte.
>
> Reviewed-by: [email protected]
> ---
>
> monitor/rfcomm.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/monitor/rfcomm.c b/monitor/rfcomm.c
> index 9b88a3440e31..76b1123bb23d 100644
> --- a/monitor/rfcomm.c
> +++ b/monitor/rfcomm.c
> @@ -452,6 +452,9 @@ void rfcomm_packet(const struct l2cap_frame *frame)
> hdr.length = GET_LEN16(hdr.length);
> }
>
> + if (l2cap_frame->size == 0)
> + goto fail;
> +
if (!l2cap_frame->size)
> l2cap_frame_pull(&tmp_frame, l2cap_frame, l2cap_frame->size-1);
Or perhaps we can make l2cap_frame_pull check if it can really pull
the frame and return false if it doesn't just as get_*.
> if (!l2cap_frame_get_u8(&tmp_frame, &hdr.fcs))
> --
> 2.31.1.607.g51e8a6a459-goog
>
--
Luiz Augusto von Dentz
On Wed, May 12, 2021 at 2:04 AM Luiz Augusto von Dentz
<[email protected]> wrote:
>
> Hi Howard,
>
> On Tue, May 11, 2021 at 12:28 AM Howard Chung <[email protected]> wrote:
> >
> > From: Yun-Hao Chung <[email protected]>
> >
> > When RFCOMM_TEST_EA returns false, btmon assumes packet data has at
> > least 5 bytes long. If that assumption fails, btmon could crash when
> > trying to read the next byte.
> > This patch fix it by checking the remaining size before reading the last
> > byte.
> >
> > Reviewed-by: [email protected]
> > ---
> >
> > monitor/rfcomm.c | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/monitor/rfcomm.c b/monitor/rfcomm.c
> > index 9b88a3440e31..76b1123bb23d 100644
> > --- a/monitor/rfcomm.c
> > +++ b/monitor/rfcomm.c
> > @@ -452,6 +452,9 @@ void rfcomm_packet(const struct l2cap_frame *frame)
> > hdr.length = GET_LEN16(hdr.length);
> > }
> >
> > + if (l2cap_frame->size == 0)
> > + goto fail;
> > +
>
> if (!l2cap_frame->size)
will do.
>
>
>
> > l2cap_frame_pull(&tmp_frame, l2cap_frame, l2cap_frame->size-1);
>
> Or perhaps we can make l2cap_frame_pull check if it can really pull
> the frame and return false if it doesn't just as get_*.
IMO, this might not be the best solution. Since |len|l in
2cap_frame_pull is uint16_t, when l2cap_frame->size-1 overflows it
might confuse people.
>
>
>
> > if (!l2cap_frame_get_u8(&tmp_frame, &hdr.fcs))
> > --
> > 2.31.1.607.g51e8a6a459-goog
> >
>
>
> --
> Luiz Augusto von Dentz