* /sys/kernel/debug/usb/devices
T: Bus=03 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=b85b Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Gongwei Li <[email protected]>
---
v2:
- Modified the commit message
v3:
- Modified the author personal information
drivers/bluetooth/btusb.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 64a3febb9dec..437d0b53efe7 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -498,6 +498,10 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0bda, 0xc822), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ /* Realtek 8822CU Bluetooth devices */
+ { USB_DEVICE(0x13d3, 0x3549), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
+
/* Realtek 8852AE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0x2852), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
--
2.25.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=700661
---Test result---
Test Summary:
CheckPatch FAIL 0.96 seconds
GitLint PASS 0.34 seconds
SubjectPrefix PASS 0.12 seconds
BuildKernel PASS 34.12 seconds
BuildKernel32 PASS 30.21 seconds
TestRunnerSetup PASS 425.44 seconds
TestRunner_l2cap-tester PASS 16.12 seconds
TestRunner_iso-tester PASS 15.74 seconds
TestRunner_bnep-tester PASS 5.55 seconds
TestRunner_mgmt-tester PASS 107.92 seconds
TestRunner_rfcomm-tester PASS 9.44 seconds
TestRunner_sco-tester PASS 9.06 seconds
TestRunner_ioctl-tester PASS 10.25 seconds
TestRunner_mesh-tester PASS 7.07 seconds
TestRunner_smp-tester PASS 8.70 seconds
TestRunner_userchan-tester PASS 5.82 seconds
IncrementalBuild PASS 31.64 seconds
Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
[v3] Bluetooth: btusb: Add a new PID/VID 13d3/3549 for RTL8822CU
WARNING: From:/Signed-off-by: email address mismatch: 'From: Gongwei Li <[email protected]>' != 'Signed-off-by: Gongwei Li <[email protected]>'
total: 0 errors, 1 warnings, 10 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/src/13060883.patch has style problems, please review.
NOTE: Ignored message types: UNKNOWN_COMMIT_ID
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
---
Regards,
Linux Bluetooth