Subject: Re: [PATCH v2 2/3] dt-bindings: net: bluetooth: Convert to DT schema

Hi Rob Herring,

On 2021-04-21 22:40, Rob Herring wrote:
> On Tue, Apr 20, 2021 at 09:56:49PM +0530, Venkata Lakshmi Narayana
> Gubba wrote:
>> Converted Qualcomm Bluetooth binidings to DT schema.
>>
>> Signed-off-by: Venkata Lakshmi Narayana Gubba
>> <[email protected]>
>> ---
>> .../devicetree/bindings/net/qualcomm-bluetooth.txt | 69
>> -----------------
>> .../bindings/net/qualcomm-bluetooth.yaml | 87
>> ++++++++++++++++++++++
>> 2 files changed, 87 insertions(+), 69 deletions(-)
>> delete mode 100644
>> Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
>> create mode 100644
>> Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
>
>> diff --git
>> a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
>> b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
>> new file mode 100644
>> index 0000000..55cd995
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
>> @@ -0,0 +1,87 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Bluetooth Chips
>> +
>> +maintainers:
>> + - Rob Herring <[email protected]>
>> + - Marcel Holtmann <[email protected]>
>
> This should be someone that knows and cares about this h/w. I don't.
>
[Venkata]:
I will remove your name in next patchset.
>> +
>> +description:
>> + This binding describes Qualcomm UART-attached bluetooth chips.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - qcom,qca6174-bt
>> + - qcom,qca9377-bt
>> + - qcom,wcn3990-bt
>> + - qcom,wcn3991-bt
>> + - qcom,wcn3998-bt
>> + - qcom,qca6390-bt
>> +
>> + enable-gpios:
>> + maxItems: 1
>> + description: gpio specifier used to enable chip
>> +
>> + clocks:
>> + maxItems: 1
>> + description: clock provided to the controller (SUSCLK_32KHZ)
>> +
>> + vddio-supply:
>> + description: VDD_IO supply regulator handle
>> +
>> + vddxo-supply:
>> + description: VDD_XO supply regulator handle
>> +
>> + vddrf-supply:
>> + description: VDD_RF supply regulator handle
>> +
>> + vddch0-supply:
>> + description: VDD_CH0 supply regulator handle
>> +
>> + max-speed:
>> + description: see
>> Documentation/devicetree/bindings/serial/serial.yaml
>> +
>> + firmware-name:
>> + description: specify the name of nvm firmware to load
>> +
>> + local-bd-address:
>> + description: see
>> Documentation/devicetree/bindings/net/bluetooth.txt
>> +
>> +
>> +required:
>> + - compatible
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/gpio/gpio.h>
>> + uart {
>> + label = "BT-UART";
>
> Why do you need a label for in internal port where you've described the
> connection?
>
[Venkata]:
I will remove in next patchset.
>> + status = "okay";
>
> Don't show status in examples.
>
[Venkata]:
Sure, I will remove in next patchset.
>> +
>> + bluetooth {
>> + compatible = "qcom,qca6174-bt";
>> + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
>> + clocks = <&divclk4>;
>> + firmware-name = "nvm_00440302.bin";
>> + };
>> + };
>> + - |
>> + uart {
>> +
>> + bluetooth {
>> + compatible = "qcom,wcn3990-bt";
>> + vddio-supply = <&vreg_s4a_1p8>;
>> + vddxo-supply = <&vreg_l7a_1p8>;
>> + vddrf-supply = <&vreg_l17a_1p3>;
>> + vddch0-supply = <&vreg_l25a_3p3>;
>> + max-speed = <3200000>;
>> + firmware-name = "crnv21.bin";
>> + };
>> + };
>> --
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
>> member
>> of Code Aurora Forum, hosted by The Linux Foundation
>>

Regards,
Venkata.