FHS 3.0 deprecated /var/run in favour of /run.
FHS 3.0 was released over 5 years ago.
I think it is time for nfs-utils to catch up.
Note that some places, particularly systemd unit files, already use just
"/run".
Signed-off-by: NeilBrown <[email protected]>
---
support/nfs/getport.c | 2 +-
tests/test-lib.sh | 2 +-
utils/blkmapd/device-discovery.c | 2 +-
utils/statd/sm-notify.c | 4 ++--
utils/statd/start-statd | 10 +++++-----
utils/statd/statd.c | 2 +-
utils/statd/statd.man | 2 +-
7 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/support/nfs/getport.c b/support/nfs/getport.c
index e458d8fe95f8..813f7bf9e3ff 100644
--- a/support/nfs/getport.c
+++ b/support/nfs/getport.c
@@ -904,7 +904,7 @@ int nfs_getport_ping(struct sockaddr *sap, const socklen_t salen,
* listen on AF_LOCAL.
*
* If that doesn't work (for example, if portmapper is running, or rpcbind
- * isn't listening on /var/run/rpcbind.sock), send a query via UDP to localhost
+ * isn't listening on /run/rpcbind.sock), send a query via UDP to localhost
* (UDP doesn't leave a socket in TIME_WAIT, and the timeout is a relatively
* short 3 seconds).
*/
diff --git a/tests/test-lib.sh b/tests/test-lib.sh
index 57af37b11126..e47ad13539ac 100644
--- a/tests/test-lib.sh
+++ b/tests/test-lib.sh
@@ -56,5 +56,5 @@ start_statd() {
# shut down statd
kill_statd() {
- kill `cat /var/run/rpc.statd.pid`
+ kill `cat /run/rpc.statd.pid`
}
diff --git a/utils/blkmapd/device-discovery.c b/utils/blkmapd/device-discovery.c
index f5f9b10b95f2..77ebe73670fa 100644
--- a/utils/blkmapd/device-discovery.c
+++ b/utils/blkmapd/device-discovery.c
@@ -64,7 +64,7 @@
#define EVENT_BUFSIZE (1024 * EVENT_SIZE)
#define RPCPIPE_DIR "/var/lib/nfs/rpc_pipefs"
-#define PID_FILE "/var/run/blkmapd.pid"
+#define PID_FILE "/run/blkmapd.pid"
#define CONF_SAVE(w, f) do { \
char *p = f; \
diff --git a/utils/statd/sm-notify.c b/utils/statd/sm-notify.c
index 606b912d3629..ed82b8f2533d 100644
--- a/utils/statd/sm-notify.c
+++ b/utils/statd/sm-notify.c
@@ -901,7 +901,7 @@ find_host(uint32_t xid)
}
/*
- * Record pid in /var/run/sm-notify.pid
+ * Record pid in /run/sm-notify.pid
* This file should remain until a reboot, even if the
* program exits.
* If file already exists, fail.
@@ -913,7 +913,7 @@ static int record_pid(void)
int fd;
(void)snprintf(pid, sizeof(pid), "%d\n", (int)getpid());
- fd = open("/var/run/sm-notify.pid", O_CREAT|O_EXCL|O_WRONLY, 0600);
+ fd = open("/run/sm-notify.pid", O_CREAT|O_EXCL|O_WRONLY, 0600);
if (fd < 0)
return 0;
diff --git a/utils/statd/start-statd b/utils/statd/start-statd
index 54ced822016a..2baf73c385cf 100755
--- a/utils/statd/start-statd
+++ b/utils/statd/start-statd
@@ -1,18 +1,18 @@
#!/bin/sh
# nfsmount calls this script when mounting a filesystem with locking
# enabled, but when statd does not seem to be running (based on
-# /var/run/rpc.statd.pid).
+# /run/rpc.statd.pid).
# It should run statd with whatever flags are apropriate for this
# site.
PATH="/sbin:/usr/sbin:/bin:/usr/bin"
# Use flock to serialize the running of this script
-exec 9> /var/run/rpc.statd.lock
+exec 9> /run/rpc.statd.lock
flock -e 9
-if [ -s /var/run/rpc.statd.pid ] &&
- [ 1`cat /var/run/rpc.statd.pid` -gt 1 ] &&
- kill -0 `cat /var/run/rpc.statd.pid` > /dev/null 2>&1
+if [ -s /run/rpc.statd.pid ] &&
+ [ 1`cat /run/rpc.statd.pid` -gt 1 ] &&
+ kill -0 `cat /run/rpc.statd.pid` > /dev/null 2>&1
then
# statd already running - must have been slow to respond.
exit 0
diff --git a/utils/statd/statd.c b/utils/statd/statd.c
index 32169d47c66d..a469a67a91df 100644
--- a/utils/statd/statd.c
+++ b/utils/statd/statd.c
@@ -161,7 +161,7 @@ usage(void)
fprintf(stderr," -H Specify a high-availability callout program.\n");
}
-static const char *pidfile = "/var/run/rpc.statd.pid";
+static const char *pidfile = "/run/rpc.statd.pid";
int pidfd = -1;
static void create_pidfile(void)
diff --git a/utils/statd/statd.man b/utils/statd/statd.man
index ecd3e889e831..7441ffde2687 100644
--- a/utils/statd/statd.man
+++ b/utils/statd/statd.man
@@ -440,7 +440,7 @@ directory containing notify list
.I /var/lib/nfs/state
NSM state number for this host
.TP 2.5i
-.I /var/run/run.statd.pid
+.I /run/run.statd.pid
pid file
.TP 2.5i
.I /etc/netconfig
--
2.30.1
On 5/3/21 8:57 PM, NeilBrown wrote:
> FHS 3.0 deprecated /var/run in favour of /run.
> FHS 3.0 was released over 5 years ago.
> I think it is time for nfs-utils to catch up.
> Note that some places, particularly systemd unit files, already use just
> "/run".
>
> Signed-off-by: NeilBrown <[email protected]>
Committed (tag: nfs-utils-2-5-4-rc3)
steved.
> ---
> support/nfs/getport.c | 2 +-
> tests/test-lib.sh | 2 +-
> utils/blkmapd/device-discovery.c | 2 +-
> utils/statd/sm-notify.c | 4 ++--
> utils/statd/start-statd | 10 +++++-----
> utils/statd/statd.c | 2 +-
> utils/statd/statd.man | 2 +-
> 7 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/support/nfs/getport.c b/support/nfs/getport.c
> index e458d8fe95f8..813f7bf9e3ff 100644
> --- a/support/nfs/getport.c
> +++ b/support/nfs/getport.c
> @@ -904,7 +904,7 @@ int nfs_getport_ping(struct sockaddr *sap, const socklen_t salen,
> * listen on AF_LOCAL.
> *
> * If that doesn't work (for example, if portmapper is running, or rpcbind
> - * isn't listening on /var/run/rpcbind.sock), send a query via UDP to localhost
> + * isn't listening on /run/rpcbind.sock), send a query via UDP to localhost
> * (UDP doesn't leave a socket in TIME_WAIT, and the timeout is a relatively
> * short 3 seconds).
> */
> diff --git a/tests/test-lib.sh b/tests/test-lib.sh
> index 57af37b11126..e47ad13539ac 100644
> --- a/tests/test-lib.sh
> +++ b/tests/test-lib.sh
> @@ -56,5 +56,5 @@ start_statd() {
>
> # shut down statd
> kill_statd() {
> - kill `cat /var/run/rpc.statd.pid`
> + kill `cat /run/rpc.statd.pid`
> }
> diff --git a/utils/blkmapd/device-discovery.c b/utils/blkmapd/device-discovery.c
> index f5f9b10b95f2..77ebe73670fa 100644
> --- a/utils/blkmapd/device-discovery.c
> +++ b/utils/blkmapd/device-discovery.c
> @@ -64,7 +64,7 @@
> #define EVENT_BUFSIZE (1024 * EVENT_SIZE)
>
> #define RPCPIPE_DIR "/var/lib/nfs/rpc_pipefs"
> -#define PID_FILE "/var/run/blkmapd.pid"
> +#define PID_FILE "/run/blkmapd.pid"
>
> #define CONF_SAVE(w, f) do { \
> char *p = f; \
> diff --git a/utils/statd/sm-notify.c b/utils/statd/sm-notify.c
> index 606b912d3629..ed82b8f2533d 100644
> --- a/utils/statd/sm-notify.c
> +++ b/utils/statd/sm-notify.c
> @@ -901,7 +901,7 @@ find_host(uint32_t xid)
> }
>
> /*
> - * Record pid in /var/run/sm-notify.pid
> + * Record pid in /run/sm-notify.pid
> * This file should remain until a reboot, even if the
> * program exits.
> * If file already exists, fail.
> @@ -913,7 +913,7 @@ static int record_pid(void)
> int fd;
>
> (void)snprintf(pid, sizeof(pid), "%d\n", (int)getpid());
> - fd = open("/var/run/sm-notify.pid", O_CREAT|O_EXCL|O_WRONLY, 0600);
> + fd = open("/run/sm-notify.pid", O_CREAT|O_EXCL|O_WRONLY, 0600);
> if (fd < 0)
> return 0;
>
> diff --git a/utils/statd/start-statd b/utils/statd/start-statd
> index 54ced822016a..2baf73c385cf 100755
> --- a/utils/statd/start-statd
> +++ b/utils/statd/start-statd
> @@ -1,18 +1,18 @@
> #!/bin/sh
> # nfsmount calls this script when mounting a filesystem with locking
> # enabled, but when statd does not seem to be running (based on
> -# /var/run/rpc.statd.pid).
> +# /run/rpc.statd.pid).
> # It should run statd with whatever flags are apropriate for this
> # site.
> PATH="/sbin:/usr/sbin:/bin:/usr/bin"
>
> # Use flock to serialize the running of this script
> -exec 9> /var/run/rpc.statd.lock
> +exec 9> /run/rpc.statd.lock
> flock -e 9
>
> -if [ -s /var/run/rpc.statd.pid ] &&
> - [ 1`cat /var/run/rpc.statd.pid` -gt 1 ] &&
> - kill -0 `cat /var/run/rpc.statd.pid` > /dev/null 2>&1
> +if [ -s /run/rpc.statd.pid ] &&
> + [ 1`cat /run/rpc.statd.pid` -gt 1 ] &&
> + kill -0 `cat /run/rpc.statd.pid` > /dev/null 2>&1
> then
> # statd already running - must have been slow to respond.
> exit 0
> diff --git a/utils/statd/statd.c b/utils/statd/statd.c
> index 32169d47c66d..a469a67a91df 100644
> --- a/utils/statd/statd.c
> +++ b/utils/statd/statd.c
> @@ -161,7 +161,7 @@ usage(void)
> fprintf(stderr," -H Specify a high-availability callout program.\n");
> }
>
> -static const char *pidfile = "/var/run/rpc.statd.pid";
> +static const char *pidfile = "/run/rpc.statd.pid";
>
> int pidfd = -1;
> static void create_pidfile(void)
> diff --git a/utils/statd/statd.man b/utils/statd/statd.man
> index ecd3e889e831..7441ffde2687 100644
> --- a/utils/statd/statd.man
> +++ b/utils/statd/statd.man
> @@ -440,7 +440,7 @@ directory containing notify list
> .I /var/lib/nfs/state
> NSM state number for this host
> .TP 2.5i
> -.I /var/run/run.statd.pid
> +.I /run/run.statd.pid
> pid file
> .TP 2.5i
> .I /etc/netconfig
>