This patch removes nfs-secure.target.
Instead, rpc.gssd and rpc.svcgssd start started if they appear to be needed.
For rpc.gssd, this means if the file /etc/krb5.keytab exists.
As the only security mechanism supported is krb5, that file must exist
for rpc.gssd to be useful. Conversely, if it does exist, it seems very
likely that krb5 is configured on the system an may be used for NFS.
For rpc.svcgssd, it also means checking if gss-proxy might be performing
the equivalent task instead. So we check if it is running, and if the kernel
is able to talk to it.
Signed-off-by: NeilBrown <[email protected]>
diff --git a/systemd/README b/systemd/README
index 00d3e415092e..d697cefbe229 100644
--- a/systemd/README
+++ b/systemd/README
@@ -24,11 +24,6 @@ by a suitable 'preset' setting:
is started by /usr/sbin/start-statd which mount.nfs will run
if statd is needed.
- nfs-secure.target
- If enabled, then rpc.gssd will be run when either -client or
- -server is started, and rpc.svcgssd will be run when -server
- is started
-
nfs-blkmap.target
If enabled, then blkmapd will be run when nfs-client.target is
started.
@@ -52,3 +47,15 @@ This should write /run/sysconfig/nfs-utils based on configuration
information such as in /etc/sysconfig/nfs or /etc/defaults/nfs.
It should write to a tmp file and rename to the target to
avoid parallel units seeing incomplete copies of the file.
+
+rpc.gssd and rpc.svcgssd are assumed to be needed if /etc/krb5.keytab
+is present.
+If a site needs this file present but does not want the gss daemons
+running, it should create
+ /etc/systemd/system/rpc-gssd.service.d/01-disable.conf
+and
+ /etc/systemd/system/rpc-svcgssd.service.d/01-disable.conf
+
+containing
+ [Unit]
+ ConditionNull=false
diff --git a/systemd/nfs-secure.target b/systemd/nfs-secure.target
deleted file mode 100644
index 0127fdb07dbd..000000000000
--- a/systemd/nfs-secure.target
+++ /dev/null
@@ -1,8 +0,0 @@
-[Unit]
-Description=Secure NFS client/server services
-# If this target is enabled, then rpc.gssd and rpc.svcgssd will be started
-# as required. If it is not enabled they won't.
-
-[Install]
-WantedBy=remote-fs.target
-WantedBy=multi-user.target
\ No newline at end of file
diff --git a/systemd/rpc-gssd.service b/systemd/rpc-gssd.service
index f0fef007d480..8778c3ef651b 100644
--- a/systemd/rpc-gssd.service
+++ b/systemd/rpc-gssd.service
@@ -3,8 +3,7 @@ Description=RPC security service for NFS client and server
Requires=var-lib-nfs-rpc_pipefs.mount
After=var-lib-nfs-rpc_pipefs.mount
-Requisite=nfs-secure.target
-After=nfs-secure.target
+ConditionPathExists=/etc/krb5.keytab
[Service]
EnvironmentFile=-/run/sysconfig/nfs-utils
diff --git a/systemd/rpc-svcgssd.service b/systemd/rpc-svcgssd.service
index f024d40a8f41..036ec579bfc1 100644
--- a/systemd/rpc-svcgssd.service
+++ b/systemd/rpc-svcgssd.service
@@ -4,8 +4,10 @@ Requires=var-lib-nfs-rpc_pipefs.mount
After=var-lib-nfs-rpc_pipefs.mount
PartOf=nfs-server.service
-Requisite=nfs-secure.target
-After=nfs-secure.target
+After=gssproxy.service
+ConditionPathExists=|!@localstatedir@/run/gssproxy.pid
+ConditionPathExists=|!/proc/net/rpc/use-gss-proxy
+ConditionPathExists=/etc/krb5.keytab
[Service]
EnvironmentFile=-/run/sysconfig/nfs-utils
On Thu, 13 Feb 2014 14:42:15 -0500 Steve Dickson <[email protected]> wrote:
>
>
> On 02/04/2014 10:18 PM, NeilBrown wrote:
> >
> >
> > This patch removes nfs-secure.target.
> > Instead, rpc.gssd and rpc.svcgssd start started if they appear to be needed.
> >
> > For rpc.gssd, this means if the file /etc/krb5.keytab exists.
> > As the only security mechanism supported is krb5, that file must exist
> > for rpc.gssd to be useful. Conversely, if it does exist, it seems very
> > likely that krb5 is configured on the system an may be used for NFS.
> >
> > For rpc.svcgssd, it also means checking if gss-proxy might be performing
> > the equivalent task instead. So we check if it is running, and if the kernel
> > is able to talk to it.
> >
> > Signed-off-by: NeilBrown <[email protected]>
> Committed to the systemd branch of my git tree...
>
> I would like to more testing before I move them on
> to the master branch...
Thanks Steve. And I totally agree with more testing, and also more
development, tidying up, documentation, and integration with "make install".
This is still a WIP and doesn't belong on master yet.
I'll be sending more patches over the coming weeks.
Thanks,
NeilBrown
On 02/04/2014 10:18 PM, NeilBrown wrote:
>
>
> This patch removes nfs-secure.target.
> Instead, rpc.gssd and rpc.svcgssd start started if they appear to be needed.
>
> For rpc.gssd, this means if the file /etc/krb5.keytab exists.
> As the only security mechanism supported is krb5, that file must exist
> for rpc.gssd to be useful. Conversely, if it does exist, it seems very
> likely that krb5 is configured on the system an may be used for NFS.
>
> For rpc.svcgssd, it also means checking if gss-proxy might be performing
> the equivalent task instead. So we check if it is running, and if the kernel
> is able to talk to it.
>
> Signed-off-by: NeilBrown <[email protected]>
Committed to the systemd branch of my git tree...
I would like to more testing before I move them on
to the master branch...
steved.
>
> diff --git a/systemd/README b/systemd/README
> index 00d3e415092e..d697cefbe229 100644
> --- a/systemd/README
> +++ b/systemd/README
> @@ -24,11 +24,6 @@ by a suitable 'preset' setting:
> is started by /usr/sbin/start-statd which mount.nfs will run
> if statd is needed.
>
> - nfs-secure.target
> - If enabled, then rpc.gssd will be run when either -client or
> - -server is started, and rpc.svcgssd will be run when -server
> - is started
> -
> nfs-blkmap.target
> If enabled, then blkmapd will be run when nfs-client.target is
> started.
> @@ -52,3 +47,15 @@ This should write /run/sysconfig/nfs-utils based on configuration
> information such as in /etc/sysconfig/nfs or /etc/defaults/nfs.
> It should write to a tmp file and rename to the target to
> avoid parallel units seeing incomplete copies of the file.
> +
> +rpc.gssd and rpc.svcgssd are assumed to be needed if /etc/krb5.keytab
> +is present.
> +If a site needs this file present but does not want the gss daemons
> +running, it should create
> + /etc/systemd/system/rpc-gssd.service.d/01-disable.conf
> +and
> + /etc/systemd/system/rpc-svcgssd.service.d/01-disable.conf
> +
> +containing
> + [Unit]
> + ConditionNull=false
> diff --git a/systemd/nfs-secure.target b/systemd/nfs-secure.target
> deleted file mode 100644
> index 0127fdb07dbd..000000000000
> --- a/systemd/nfs-secure.target
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -[Unit]
> -Description=Secure NFS client/server services
> -# If this target is enabled, then rpc.gssd and rpc.svcgssd will be started
> -# as required. If it is not enabled they won't.
> -
> -[Install]
> -WantedBy=remote-fs.target
> -WantedBy=multi-user.target
> \ No newline at end of file
> diff --git a/systemd/rpc-gssd.service b/systemd/rpc-gssd.service
> index f0fef007d480..8778c3ef651b 100644
> --- a/systemd/rpc-gssd.service
> +++ b/systemd/rpc-gssd.service
> @@ -3,8 +3,7 @@ Description=RPC security service for NFS client and server
> Requires=var-lib-nfs-rpc_pipefs.mount
> After=var-lib-nfs-rpc_pipefs.mount
>
> -Requisite=nfs-secure.target
> -After=nfs-secure.target
> +ConditionPathExists=/etc/krb5.keytab
>
> [Service]
> EnvironmentFile=-/run/sysconfig/nfs-utils
> diff --git a/systemd/rpc-svcgssd.service b/systemd/rpc-svcgssd.service
> index f024d40a8f41..036ec579bfc1 100644
> --- a/systemd/rpc-svcgssd.service
> +++ b/systemd/rpc-svcgssd.service
> @@ -4,8 +4,10 @@ Requires=var-lib-nfs-rpc_pipefs.mount
> After=var-lib-nfs-rpc_pipefs.mount
> PartOf=nfs-server.service
>
> -Requisite=nfs-secure.target
> -After=nfs-secure.target
> +After=gssproxy.service
> +ConditionPathExists=|!@localstatedir@/run/gssproxy.pid
> +ConditionPathExists=|!/proc/net/rpc/use-gss-proxy
> +ConditionPathExists=/etc/krb5.keytab
>
> [Service]
> EnvironmentFile=-/run/sysconfig/nfs-utils
>