recently nfsometer->cthon04 tests always fail on RHEL-8 and Fedora
before, tests.init is used as both shell script and Makefile
it's hard to dynamic config to compile successfully on both RHEL-7
and RHEL-8.
so I think introduce a generater to get right tests.init is better
Signed-off-by: Jianhong Yin <[email protected]>
---
based on git://git.linux-nfs.org/projects/steved/cthon04.git
test pass on RHEL-8 RHEL-7 RHEL-6 RHEL-5 and RHEL-4
.gitignore | 1 +
Makefile | 8 +-
README | 3 +
tests.init => tests.init.orig | 0
tests.init.sh | 390 ++++++++++++++++++++++++++++++++++
5 files changed, 401 insertions(+), 1 deletion(-)
rename tests.init => tests.init.orig (100%)
create mode 100755 tests.init.sh
diff --git a/.gitignore b/.gitignore
index 0956596..67f57f3 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,4 +1,5 @@
*/*.o
+tests.init
basic/test1
basic/test2
basic/test3
diff --git a/Makefile b/Makefile
index 05859bb..9fd76d9 100644
--- a/Makefile
+++ b/Makefile
@@ -7,12 +7,14 @@
# 'make dist DESTDIR=path' copies sources to path
# 'make tar DESTDIR=path' runs make dist and then packs the directory
# 'make rpm DESTDIR=path' runs make tar and runs rpmbuild -ta on it
-
DESTDIR=/no/such/path
COPYFILES=runtests tests.init server domount.c README READWIN.txt Testitems \
getopt.c tests.h unixdos.h cthon04.spec
+# generate tests.init file
+$(shell ./tests.init.sh)
+
include tests.init
all: domount getopt
@@ -73,3 +75,7 @@ rpm: tar
mknewdirs:
-mkdir $(DESTDIR)/basic $(DESTDIR)/general $(DESTDIR)/special \
$(DESTDIR)/tools $(DESTDIR)/lock
+
+.PHONY: tests.init
+tests.init:
+ sh ./tests.init.sh
diff --git a/README b/README
index 28367fa..3e20792 100644
--- a/README
+++ b/README
@@ -540,6 +540,9 @@ None were found.
See READWIN.txt for information about running the tests under DOS or
Windows.
+Changes for 2019 include the following:
+
+1. Add tests.init.sh to generate tests.init file.
Changes for 2004 include the following:
diff --git a/tests.init b/tests.init.orig
similarity index 100%
rename from tests.init
rename to tests.init.orig
diff --git a/tests.init.sh b/tests.init.sh
new file mode 100755
index 0000000..a8a856c
--- /dev/null
+++ b/tests.init.sh
@@ -0,0 +1,390 @@
+#!/bin/sh
+
+OS=${1:-Linux}
+FSTYPE=$${2:-nfs}
+Initfile=tests.init
+
+cat <<\EOF >$Initfile
+#
+# @(#)tests.init 1.26 2003/12/30 Connectathon testsuite
+#
+MNTOPTIONS="rw,hard,intr"
+# Dummy MNTPOINT definition; should get overriden by server script.
+MNTPOINT="/mnt"
+
+SERVER=""
+SERVPATH="/server"
+TEST="-a"
+TESTARG="-t"
+
+EOF
+
+# set MOUNTCMD and UMOUNTCMD
+echo "# set MOUNTCMD and UMOUNTCMD" >>$Initfile
+case $OS in
+SVR3)
+cat <<\EOF >>$Initfile
+# Use this mount command if using:
+# SVR3
+MOUNTCMD='./domount -f NFS,$MNTOPTIONS $SERVER\:$SERVPATH $MNTPOINT'
+EOF
+;;
+SVR4|Solaris2.x)
+cat <<\EOF >>$Initfile
+# Use this mount command if using:
+# SVR4
+# Solaris 2.x
+MOUNTCMD='./domount -F nfs -o $MNTOPTIONS $SERVER\:$SERVPATH $MNTPOINT'
+CFSMOUNTCMD='./domount -F cachefs -o $MNTOPTIONS $SERVER\:$SERVPATH $MNTPOINT'
+EOF
+;;
+BSD|SunOS4.x|Tru64UNIX|HPUX|Linux|AIX|MacOSX)
+cat <<\EOF >>$Initfile
+# Use this mount command if using:
+# BSD
+# SunOS 4.X
+# Tru64 UNIX
+# HPUX
+# Linux
+# AIX
+# Mac OS X
+# At least some BSD systems don't recognize "hard" (since that's the
+# default), so you might also want to use this definition of MNTOPTIONS.
+MNTOPTIONS="rw,intr"
+MOUNTCMD='./domount -o $MNTOPTIONS $SERVER\:$SERVPATH $MNTPOINT'
+EOF
+;;
+DG/UX)
+cat <<\EOF >>$Initfile
+# Use this mount command if using:
+# DG/UX
+MOUNTCMD='./domount -t nfs -o $MNTOPTIONS $SERVER\:$SERVPATH $MNTPOINT'
+EOF
+;;
+esac
+
+if test $FSTYPE = cifs; then
+ cat <<\EOF >>$Initfile
+# Use this mount command if using:
+# SMB/CIFS
+MOUNTCMD='./domount -t cifs -o $MNTOPTIONS //$SERVER/$SERVPATH $MNTPOINT'
+EOF
+fi
+cat <<\EOF >>$Initfile
+UMOUNTCMD='./domount -u $MNTPOINT'
+
+EOF
+
+# set DASHN and BLC
+echo "# set DASHN and BLC" >>$Initfile
+case $OS in
+SVR3|SVR4|Solaris2.x|HPUX)
+cat <<\EOF >>$Initfile
+# Use the next two lines if using:
+# SVR3
+# SVR4
+# Solaris 2.x
+# HPUX
+DASHN=
+BLC=\\c
+EOF
+;;
+BSD|SunOS4.x|Linux|Tru64UNIX|MacOSX)
+cat <<\EOF >>$Initfile
+# Use the next two lines if using:
+# BSD
+# SunOS 4.X
+# Linux
+# Tru64 UNIX
+# Mac OS X
+DASHN=-n
+BLC=
+EOF
+;;
+esac
+
+# set PATH
+echo >>$Initfile
+echo -e "# set PATH" >>$Initfile
+case $OS in
+Solaris2.x)
+cat <<\EOF >>$Initfile
+# Use this path for:
+# Solaris 2.x
+PATH=/opt/SUNWspro/bin:/usr/ccs/bin:/sbin:/bin:/usr/bin:/usr/ucb:/etc:.
+
+# Use this path for:
+# Solaris 2.x with GCC
+#PATH=/opt/gnu/bin:/usr/ccs/bin:/sbin:/bin:/usr/bin:/usr/ucb:/etc:.
+
+EOF
+;;
+
+HPUX)
+cat <<\EOF >>$Initfile
+# Use this path for:
+# HPUX
+PATH=/bin:/usr/bin:/etc:/usr/etc:/usr/local/bin:/usr/contrib/bin:.
+
+EOF
+;;
+
+BSD|SunOS4.x)
+cat <<\EOF >>$Initfile
+# Use this path for:
+# BSD
+# SunOS 4.X
+PATH=/bin:/usr/bin:/usr/ucb:/etc:/usr/etc:.
+
+EOF
+;;
+
+Tru64UNIX|SVR4|Linux)
+cat <<\EOF >>$Initfile
+# Use this path for:
+# Tru64 UNIX
+# SVR4
+# Linux
+PATH=/bin:/usr/bin:/usr/ucb:/usr/ccs/bin:/sbin:/usr/sbin:.
+
+EOF
+;;
+
+DG/UX)
+cat <<\EOF >>$Initfile
+# Use this path for:
+# DG/UX
+PATH=/bin:/usr/bin:/usr/ucb:/etc:/usr/etc:.
+
+EOF
+;;
+
+IRIX)
+cat <<\EOF >>$Initfile
+# Use this path for:
+# IRIX
+PATH=/bin:/usr/bin:/usr/bsd:/etc:/usr/etc:.
+
+EOF
+;;
+
+AIX)
+cat <<\EOF >>$Initfile
+# Use this path for:
+# AIX
+PATH=/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:.
+
+EOF
+;;
+
+MacOSX)
+cat <<\EOF >>$Initfile
+# Use this path for:
+# Mac OS X
+PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:.
+EOF
+;;
+esac
+
+#===============================================================================
+
+cat <<\EOF >>$Initfile
+# -----------------------------------------------
+# Defines for various variables used in scripts and makefiles.
+#
+# Do not remove the following three lines. They may be overridden by
+# other configuration parameters lower in this file, but these three
+# variables must be defined.
+CC=cc
+CFLAGS=
+LIBS=
+LOCKTESTS=tlock
+EOF
+
+case $OS in
+SVR3)
+cat <<\EOF >>$Initfile
+# Use with SVR3 systems.
+# Add -TR2 to CFLAGS for use on Amdahl UTS systems.
+CFLAGS=-DSVR3
+LIBS=`echo -lrpc -lsocket`
+EOF
+;;
+
+BSD)
+cat <<\EOF >>$Initfile
+# Use with BSD systems.
+CC=gcc
+CFLAGS=`echo -Duse_directs -DBSD`
+MOUNT=/sbin/mount
+UMOUNT=/sbin/umount
+EOF
+;;
+
+SVR4)
+cat <<\EOF >>$Initfile
+# Use with SVR4 systems.
+CFLAGS=-DSVR4
+LIBS=`echo -lsocket -lnsl`
+EOF
+;;
+
+SunOS4.x)
+cat <<\EOF >>$Initfile
+# Use with SunOS 4.X systems
+CC=/usr/5bin/cc
+CFLAGS=`echo -DSUNOS4X -DNEED_STRERROR`
+EOF
+;;
+
+Solaris2.x)
+cat <<\EOF >>$Initfile
+# Use with Solaris 2.x systems. Need the 5.0 C compiler (or later)
+# for 64-bit mode.
+#CC=/opt/SUNWspro/bin/cc
+# Use this with GCC
+#CC=/opt/gnu/bin/gcc
+# Use this through Solaris 2.6. For Solaris 2.7 and later, use
+# this for 32-bit mode applications.
+#CFLAGS=`echo -DSVR4 -DMMAP -DSOLARIS2X -DSTDARG`
+# Use this with gcc (32-bit binaries):
+#CFLAGS=`echo -DSVR4 -DMMAP -DSOLARIS2X -DSTDARG -mcpu=ultrasparc`
+# For Solaris 2.7 and later, use this for 64-bit mode applications
+# (Sun compiler).
+#CFLAGS=`echo -DSVR4 -DMMAP -DSOLARIS2X -DSTDARG -xO0 -xarch=v9 -dalign -Xt -L/usr/lib/sparcv9`
+# Use this to make 64-bit binaries with gcc (3.1 or later; untested):
+#CFLAGS=`echo -DSVR4 -DMMAP -DSOLARIS2X -DSTDARG -m64`
+LIBS=`echo -lsocket -lnsl`
+# Use this through Solaris 2.5.1.
+#LOCKTESTS=`echo tlock`
+# Use with 2.6 and later systems, 32-bit mode.
+LOCKTESTS=`echo tlocklfs tlock64`
+# Use with 2.7 and later, 64-bit mode.
+#LOCKTESTS=`echo tlocklfs`
+EOF
+;;
+
+Tru64UNIX)
+cat <<\EOF >>$Initfile
+# Use with Tru64 UNIX systems
+#CFLAGS=`echo -O -DTRU64 -DOSF1 -DMMAP -DSTDARG`
+# use the following instead of the above if using gcc
+#CFLAGS=`echo -O -DTRU64 -DOSF1 -DMMAP -DSTDARG -fwritable-strings`
+# 64-bit binaries with gcc (3.1 or later; untested):
+#CFLAGS=`echo -O -DTRU64 -DOSF1 -DMMAP -DSTDARG -fwritable-strings -m64`
+#MOUNT=/sbin/mount
+#UMOUNT=/sbin/umount
+EOF
+;;
+
+HPUX10B)
+cat <<\EOF >>$Initfile
+# Use with HPUX systems, 10.00 and earlier.
+CFLAGS=-DHPUX
+CC=/bin/cc
+RM=/bin/rm
+MAKE=/bin/make
+EOF
+;;
+
+HPUX10a)
+cat <<\EOF >>$Initfile
+# Use with HPUX 10.01.
+CFLAGS=`echo -Ae -DHPUX`
+CC=/opt/ansic/bin/cc
+RM=/bin/rm
+MAKE=/usr/bin/make
+EOF
+;;
+
+HPUX11-32)
+cat <<\EOF >>$Initfile
+# Use with HPUX 11.0, 32-bit machines.
+CFLAGS=`echo -Ae -DHPUX -D_PSTAT64 -D_LARGEFILE64_SOURCE -DPORTMAP`
+CC=/opt/ansic/bin/cc
+LIBS=`echo -lnsl`
+RM=/bin/rm
+MAKE=/usr/bin/make
+EOF
+;;
+
+HPUX11-64)
+cat <<\EOF >>$Initfile
+# Use with HPUX 11.0, 64-bit machines.
+CFLAGS=`echo -Ae -DHPUX -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE`
+CC=/opt/ansic/bin/cc
+RM=/bin/rm
+MAKE=/usr/bin/make
+EOF
+;;
+
+DG/UX)
+cat <<\EOF >>$Initfile
+# Use with DG/UX systems.
+CFLAGS=-DSVR4
+LIBS=`echo -lsocket -lnsl`
+EOF
+;;
+
+IRIX)
+cat <<\EOF >>$Initfile
+# Use with IRIX systems. Use HAVE_SOCKLEN_T for IRIX >= 6.5.19.
+CFLAGS=`echo -g -DHAVE_SOCKLEN_T -DSTDARG -DSVR4 -DIRIX -DMMAP`
+EOF
+;;
+
+AIX)
+cat <<\EOF >>$Initfile
+# Use with AIX.
+CC=gcc
+CFLAGS=`echo -DAIX -DSTDARG -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE`
+LOCKTESTS=`echo tlocklfs`
+EOF
+;;
+
+MacOSX)
+cat <<\EOF >>$Initfile
+# Use with Mac OS X
+CFLAGS=`echo -DMACOSX -DNATIVE64 -DLARGE_LOCKS`
+MOUNT=/sbin/mount
+UMOUNT=/sbin/umount
+LOCKTESTS=`echo tlock`
+EOF
+;;
+
+Linux)
+cat <<\EOF >>$Initfile
+MOUNT=/bin/mount
+UMOUNT=/bin/umount
+LOCKTESTS=`echo tlocklfs tlock64`
+
+# Use with Linux if your distro doesn't provide a "cc".
+CC=gcc
+
+# Use with Linux 2.2 / GNU libc 2.0
+#CFLAGS=`echo -DLINUX -DGLIBC=20 -DMMAP -DSTDARG -fwritable-strings`
+#LIBS=`echo -lnsl`
+
+# Use with Linux 2.4 / GNU libc 2.2
+#CFLAGS=`echo -DLINUX -DGLIBC=22 -DMMAP -DSTDARG -fwritable-strings`
+#LIBS=`echo -lnsl`
+
+# Use with Linux 2.6 / gcc 4.0
+CFLAGS=`echo -DLINUX -DHAVE_SOCKLEN_T -DGLIBC=22 -DMMAP -DSTDARG`
+LIBS=`echo -lnsl`
+
+EOF
+
+if [ glibc-2.26 = `{ rpm -qf /etc/ld.so.conf; echo glibc-2.26; } | sort | head -n1` ]; then
+ cat <<\EOF >>$Initfile
+# Use with Linux glibc > 2.26
+CFLAGS=`echo -DLINUX -DHAVE_SOCKLEN_T -DGLIBC=22 -DMMAP -DSTDARG`
+CFLAGS+=`pkg-config --cflags libtirpc`
+LIBS=`pkg-config --libs libtirpc`
+EOF
+fi
+
+;;
+esac
+
+
--
2.17.2
On 3/25/19 10:56 PM, Jianhong.Yin wrote:
> recently nfsometer->cthon04 tests always fail on RHEL-8 and Fedora
>
> before, tests.init is used as both shell script and Makefile
> it's hard to dynamic config to compile successfully on both RHEL-7
> and RHEL-8.
>
> so I think introduce a generater to get right tests.init is better
>
> Signed-off-by: Jianhong Yin <[email protected]>
Committed...
steved.
> ---
> based on git://git.linux-nfs.org/projects/steved/cthon04.git
> test pass on RHEL-8 RHEL-7 RHEL-6 RHEL-5 and RHEL-4
>
> .gitignore | 1 +
> Makefile | 8 +-
> README | 3 +
> tests.init => tests.init.orig | 0
> tests.init.sh | 390 ++++++++++++++++++++++++++++++++++
> 5 files changed, 401 insertions(+), 1 deletion(-)
> rename tests.init => tests.init.orig (100%)
> create mode 100755 tests.init.sh
>
> diff --git a/.gitignore b/.gitignore
> index 0956596..67f57f3 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -1,4 +1,5 @@
> */*.o
> +tests.init
> basic/test1
> basic/test2
> basic/test3
> diff --git a/Makefile b/Makefile
> index 05859bb..9fd76d9 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -7,12 +7,14 @@
> # 'make dist DESTDIR=path' copies sources to path
> # 'make tar DESTDIR=path' runs make dist and then packs the directory
> # 'make rpm DESTDIR=path' runs make tar and runs rpmbuild -ta on it
> -
>
> DESTDIR=/no/such/path
> COPYFILES=runtests tests.init server domount.c README READWIN.txt Testitems \
> getopt.c tests.h unixdos.h cthon04.spec
>
> +# generate tests.init file
> +$(shell ./tests.init.sh)
> +
> include tests.init
>
> all: domount getopt
> @@ -73,3 +75,7 @@ rpm: tar
> mknewdirs:
> -mkdir $(DESTDIR)/basic $(DESTDIR)/general $(DESTDIR)/special \
> $(DESTDIR)/tools $(DESTDIR)/lock
> +
> +.PHONY: tests.init
> +tests.init:
> + sh ./tests.init.sh
> diff --git a/README b/README
> index 28367fa..3e20792 100644
> --- a/README
> +++ b/README
> @@ -540,6 +540,9 @@ None were found.
> See READWIN.txt for information about running the tests under DOS or
> Windows.
>
> +Changes for 2019 include the following:
> +
> +1. Add tests.init.sh to generate tests.init file.
>
> Changes for 2004 include the following:
>
> diff --git a/tests.init b/tests.init.orig
> similarity index 100%
> rename from tests.init
> rename to tests.init.orig
> diff --git a/tests.init.sh b/tests.init.sh
> new file mode 100755
> index 0000000..a8a856c
> --- /dev/null
> +++ b/tests.init.sh
> @@ -0,0 +1,390 @@
> +#!/bin/sh
> +
> +OS=${1:-Linux}
> +FSTYPE=$${2:-nfs}
> +Initfile=tests.init
> +
> +cat <<\EOF >$Initfile
> +#
> +# @(#)tests.init 1.26 2003/12/30 Connectathon testsuite
> +#
> +MNTOPTIONS="rw,hard,intr"
> +# Dummy MNTPOINT definition; should get overriden by server script.
> +MNTPOINT="/mnt"
> +
> +SERVER=""
> +SERVPATH="/server"
> +TEST="-a"
> +TESTARG="-t"
> +
> +EOF
> +
> +# set MOUNTCMD and UMOUNTCMD
> +echo "# set MOUNTCMD and UMOUNTCMD" >>$Initfile
> +case $OS in
> +SVR3)
> +cat <<\EOF >>$Initfile
> +# Use this mount command if using:
> +# SVR3
> +MOUNTCMD='./domount -f NFS,$MNTOPTIONS $SERVER\:$SERVPATH $MNTPOINT'
> +EOF
> +;;
> +SVR4|Solaris2.x)
> +cat <<\EOF >>$Initfile
> +# Use this mount command if using:
> +# SVR4
> +# Solaris 2.x
> +MOUNTCMD='./domount -F nfs -o $MNTOPTIONS $SERVER\:$SERVPATH $MNTPOINT'
> +CFSMOUNTCMD='./domount -F cachefs -o $MNTOPTIONS $SERVER\:$SERVPATH $MNTPOINT'
> +EOF
> +;;
> +BSD|SunOS4.x|Tru64UNIX|HPUX|Linux|AIX|MacOSX)
> +cat <<\EOF >>$Initfile
> +# Use this mount command if using:
> +# BSD
> +# SunOS 4.X
> +# Tru64 UNIX
> +# HPUX
> +# Linux
> +# AIX
> +# Mac OS X
> +# At least some BSD systems don't recognize "hard" (since that's the
> +# default), so you might also want to use this definition of MNTOPTIONS.
> +MNTOPTIONS="rw,intr"
> +MOUNTCMD='./domount -o $MNTOPTIONS $SERVER\:$SERVPATH $MNTPOINT'
> +EOF
> +;;
> +DG/UX)
> +cat <<\EOF >>$Initfile
> +# Use this mount command if using:
> +# DG/UX
> +MOUNTCMD='./domount -t nfs -o $MNTOPTIONS $SERVER\:$SERVPATH $MNTPOINT'
> +EOF
> +;;
> +esac
> +
> +if test $FSTYPE = cifs; then
> + cat <<\EOF >>$Initfile
> +# Use this mount command if using:
> +# SMB/CIFS
> +MOUNTCMD='./domount -t cifs -o $MNTOPTIONS //$SERVER/$SERVPATH $MNTPOINT'
> +EOF
> +fi
> +cat <<\EOF >>$Initfile
> +UMOUNTCMD='./domount -u $MNTPOINT'
> +
> +EOF
> +
> +# set DASHN and BLC
> +echo "# set DASHN and BLC" >>$Initfile
> +case $OS in
> +SVR3|SVR4|Solaris2.x|HPUX)
> +cat <<\EOF >>$Initfile
> +# Use the next two lines if using:
> +# SVR3
> +# SVR4
> +# Solaris 2.x
> +# HPUX
> +DASHN=
> +BLC=\\c
> +EOF
> +;;
> +BSD|SunOS4.x|Linux|Tru64UNIX|MacOSX)
> +cat <<\EOF >>$Initfile
> +# Use the next two lines if using:
> +# BSD
> +# SunOS 4.X
> +# Linux
> +# Tru64 UNIX
> +# Mac OS X
> +DASHN=-n
> +BLC=
> +EOF
> +;;
> +esac
> +
> +# set PATH
> +echo >>$Initfile
> +echo -e "# set PATH" >>$Initfile
> +case $OS in
> +Solaris2.x)
> +cat <<\EOF >>$Initfile
> +# Use this path for:
> +# Solaris 2.x
> +PATH=/opt/SUNWspro/bin:/usr/ccs/bin:/sbin:/bin:/usr/bin:/usr/ucb:/etc:.
> +
> +# Use this path for:
> +# Solaris 2.x with GCC
> +#PATH=/opt/gnu/bin:/usr/ccs/bin:/sbin:/bin:/usr/bin:/usr/ucb:/etc:.
> +
> +EOF
> +;;
> +
> +HPUX)
> +cat <<\EOF >>$Initfile
> +# Use this path for:
> +# HPUX
> +PATH=/bin:/usr/bin:/etc:/usr/etc:/usr/local/bin:/usr/contrib/bin:.
> +
> +EOF
> +;;
> +
> +BSD|SunOS4.x)
> +cat <<\EOF >>$Initfile
> +# Use this path for:
> +# BSD
> +# SunOS 4.X
> +PATH=/bin:/usr/bin:/usr/ucb:/etc:/usr/etc:.
> +
> +EOF
> +;;
> +
> +Tru64UNIX|SVR4|Linux)
> +cat <<\EOF >>$Initfile
> +# Use this path for:
> +# Tru64 UNIX
> +# SVR4
> +# Linux
> +PATH=/bin:/usr/bin:/usr/ucb:/usr/ccs/bin:/sbin:/usr/sbin:.
> +
> +EOF
> +;;
> +
> +DG/UX)
> +cat <<\EOF >>$Initfile
> +# Use this path for:
> +# DG/UX
> +PATH=/bin:/usr/bin:/usr/ucb:/etc:/usr/etc:.
> +
> +EOF
> +;;
> +
> +IRIX)
> +cat <<\EOF >>$Initfile
> +# Use this path for:
> +# IRIX
> +PATH=/bin:/usr/bin:/usr/bsd:/etc:/usr/etc:.
> +
> +EOF
> +;;
> +
> +AIX)
> +cat <<\EOF >>$Initfile
> +# Use this path for:
> +# AIX
> +PATH=/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:.
> +
> +EOF
> +;;
> +
> +MacOSX)
> +cat <<\EOF >>$Initfile
> +# Use this path for:
> +# Mac OS X
> +PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:.
> +EOF
> +;;
> +esac
> +
> +#===============================================================================
> +
> +cat <<\EOF >>$Initfile
> +# -----------------------------------------------
> +# Defines for various variables used in scripts and makefiles.
> +#
> +# Do not remove the following three lines. They may be overridden by
> +# other configuration parameters lower in this file, but these three
> +# variables must be defined.
> +CC=cc
> +CFLAGS=
> +LIBS=
> +LOCKTESTS=tlock
> +EOF
> +
> +case $OS in
> +SVR3)
> +cat <<\EOF >>$Initfile
> +# Use with SVR3 systems.
> +# Add -TR2 to CFLAGS for use on Amdahl UTS systems.
> +CFLAGS=-DSVR3
> +LIBS=`echo -lrpc -lsocket`
> +EOF
> +;;
> +
> +BSD)
> +cat <<\EOF >>$Initfile
> +# Use with BSD systems.
> +CC=gcc
> +CFLAGS=`echo -Duse_directs -DBSD`
> +MOUNT=/sbin/mount
> +UMOUNT=/sbin/umount
> +EOF
> +;;
> +
> +SVR4)
> +cat <<\EOF >>$Initfile
> +# Use with SVR4 systems.
> +CFLAGS=-DSVR4
> +LIBS=`echo -lsocket -lnsl`
> +EOF
> +;;
> +
> +SunOS4.x)
> +cat <<\EOF >>$Initfile
> +# Use with SunOS 4.X systems
> +CC=/usr/5bin/cc
> +CFLAGS=`echo -DSUNOS4X -DNEED_STRERROR`
> +EOF
> +;;
> +
> +Solaris2.x)
> +cat <<\EOF >>$Initfile
> +# Use with Solaris 2.x systems. Need the 5.0 C compiler (or later)
> +# for 64-bit mode.
> +#CC=/opt/SUNWspro/bin/cc
> +# Use this with GCC
> +#CC=/opt/gnu/bin/gcc
> +# Use this through Solaris 2.6. For Solaris 2.7 and later, use
> +# this for 32-bit mode applications.
> +#CFLAGS=`echo -DSVR4 -DMMAP -DSOLARIS2X -DSTDARG`
> +# Use this with gcc (32-bit binaries):
> +#CFLAGS=`echo -DSVR4 -DMMAP -DSOLARIS2X -DSTDARG -mcpu=ultrasparc`
> +# For Solaris 2.7 and later, use this for 64-bit mode applications
> +# (Sun compiler).
> +#CFLAGS=`echo -DSVR4 -DMMAP -DSOLARIS2X -DSTDARG -xO0 -xarch=v9 -dalign -Xt -L/usr/lib/sparcv9`
> +# Use this to make 64-bit binaries with gcc (3.1 or later; untested):
> +#CFLAGS=`echo -DSVR4 -DMMAP -DSOLARIS2X -DSTDARG -m64`
> +LIBS=`echo -lsocket -lnsl`
> +# Use this through Solaris 2.5.1.
> +#LOCKTESTS=`echo tlock`
> +# Use with 2.6 and later systems, 32-bit mode.
> +LOCKTESTS=`echo tlocklfs tlock64`
> +# Use with 2.7 and later, 64-bit mode.
> +#LOCKTESTS=`echo tlocklfs`
> +EOF
> +;;
> +
> +Tru64UNIX)
> +cat <<\EOF >>$Initfile
> +# Use with Tru64 UNIX systems
> +#CFLAGS=`echo -O -DTRU64 -DOSF1 -DMMAP -DSTDARG`
> +# use the following instead of the above if using gcc
> +#CFLAGS=`echo -O -DTRU64 -DOSF1 -DMMAP -DSTDARG -fwritable-strings`
> +# 64-bit binaries with gcc (3.1 or later; untested):
> +#CFLAGS=`echo -O -DTRU64 -DOSF1 -DMMAP -DSTDARG -fwritable-strings -m64`
> +#MOUNT=/sbin/mount
> +#UMOUNT=/sbin/umount
> +EOF
> +;;
> +
> +HPUX10B)
> +cat <<\EOF >>$Initfile
> +# Use with HPUX systems, 10.00 and earlier.
> +CFLAGS=-DHPUX
> +CC=/bin/cc
> +RM=/bin/rm
> +MAKE=/bin/make
> +EOF
> +;;
> +
> +HPUX10a)
> +cat <<\EOF >>$Initfile
> +# Use with HPUX 10.01.
> +CFLAGS=`echo -Ae -DHPUX`
> +CC=/opt/ansic/bin/cc
> +RM=/bin/rm
> +MAKE=/usr/bin/make
> +EOF
> +;;
> +
> +HPUX11-32)
> +cat <<\EOF >>$Initfile
> +# Use with HPUX 11.0, 32-bit machines.
> +CFLAGS=`echo -Ae -DHPUX -D_PSTAT64 -D_LARGEFILE64_SOURCE -DPORTMAP`
> +CC=/opt/ansic/bin/cc
> +LIBS=`echo -lnsl`
> +RM=/bin/rm
> +MAKE=/usr/bin/make
> +EOF
> +;;
> +
> +HPUX11-64)
> +cat <<\EOF >>$Initfile
> +# Use with HPUX 11.0, 64-bit machines.
> +CFLAGS=`echo -Ae -DHPUX -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE`
> +CC=/opt/ansic/bin/cc
> +RM=/bin/rm
> +MAKE=/usr/bin/make
> +EOF
> +;;
> +
> +DG/UX)
> +cat <<\EOF >>$Initfile
> +# Use with DG/UX systems.
> +CFLAGS=-DSVR4
> +LIBS=`echo -lsocket -lnsl`
> +EOF
> +;;
> +
> +IRIX)
> +cat <<\EOF >>$Initfile
> +# Use with IRIX systems. Use HAVE_SOCKLEN_T for IRIX >= 6.5.19.
> +CFLAGS=`echo -g -DHAVE_SOCKLEN_T -DSTDARG -DSVR4 -DIRIX -DMMAP`
> +EOF
> +;;
> +
> +AIX)
> +cat <<\EOF >>$Initfile
> +# Use with AIX.
> +CC=gcc
> +CFLAGS=`echo -DAIX -DSTDARG -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE`
> +LOCKTESTS=`echo tlocklfs`
> +EOF
> +;;
> +
> +MacOSX)
> +cat <<\EOF >>$Initfile
> +# Use with Mac OS X
> +CFLAGS=`echo -DMACOSX -DNATIVE64 -DLARGE_LOCKS`
> +MOUNT=/sbin/mount
> +UMOUNT=/sbin/umount
> +LOCKTESTS=`echo tlock`
> +EOF
> +;;
> +
> +Linux)
> +cat <<\EOF >>$Initfile
> +MOUNT=/bin/mount
> +UMOUNT=/bin/umount
> +LOCKTESTS=`echo tlocklfs tlock64`
> +
> +# Use with Linux if your distro doesn't provide a "cc".
> +CC=gcc
> +
> +# Use with Linux 2.2 / GNU libc 2.0
> +#CFLAGS=`echo -DLINUX -DGLIBC=20 -DMMAP -DSTDARG -fwritable-strings`
> +#LIBS=`echo -lnsl`
> +
> +# Use with Linux 2.4 / GNU libc 2.2
> +#CFLAGS=`echo -DLINUX -DGLIBC=22 -DMMAP -DSTDARG -fwritable-strings`
> +#LIBS=`echo -lnsl`
> +
> +# Use with Linux 2.6 / gcc 4.0
> +CFLAGS=`echo -DLINUX -DHAVE_SOCKLEN_T -DGLIBC=22 -DMMAP -DSTDARG`
> +LIBS=`echo -lnsl`
> +
> +EOF
> +
> +if [ glibc-2.26 = `{ rpm -qf /etc/ld.so.conf; echo glibc-2.26; } | sort | head -n1` ]; then
> + cat <<\EOF >>$Initfile
> +# Use with Linux glibc > 2.26
> +CFLAGS=`echo -DLINUX -DHAVE_SOCKLEN_T -DGLIBC=22 -DMMAP -DSTDARG`
> +CFLAGS+=`pkg-config --cflags libtirpc`
> +LIBS=`pkg-config --libs libtirpc`
> +EOF
> +fi
> +
> +;;
> +esac
> +
> +
>