2019-08-02 02:55:45

by John Hubbard

[permalink] [raw]
Subject: [PATCH 00/34] put_user_pages(): miscellaneous call sites

From: John Hubbard <[email protected]>

Hi,

These are best characterized as miscellaneous conversions: many (not all)
call sites that don't involve biovec or iov_iter, nor mm/. It also leaves
out a few call sites that require some more work. These are mostly pretty
simple ones.

It's probably best to send all of these via Andrew's -mm tree, assuming
that there are no significant merge conflicts with ongoing work in other
trees (which I doubt, given that these are small changes).

These patches apply to the latest linux.git. Patch #1 is also already in
Andrew's tree, but given the broad non-linux-mm Cc list, I thought it
would be more convenient to just include that patch here, so that people
can use linux.git as the base--even though these are probably destined
for linux-mm.

This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions"). That commit
has an extensive description of the problem and the planned steps to
solve it, but the highlites are:

1) Provide put_user_page*() routines, intended to be used
for releasing pages that were pinned via get_user_pages*().

2) Convert all of the call sites for get_user_pages*(), to
invoke put_user_page*(), instead of put_page(). This involves dozens of
call sites, and will take some time.

3) After (2) is complete, use get_user_pages*() and put_user_page*() to
implement tracking of these pages. This tracking will be separate from
the existing struct page refcounting.

4) Use the tracking and identification of these pages, to implement
special handling (especially in writeback paths) when the pages are
backed by a filesystem.

And a few references, also from that commit:

[1] https://lwn.net/Articles/774411/ : "DMA and get_user_pages()"
[2] https://lwn.net/Articles/753027/ : "The Trouble with get_user_pages()"


Ira Weiny (1):
fs/binfmt_elf: convert put_page() to put_user_page*()

John Hubbard (33):
mm/gup: add make_dirty arg to put_user_pages_dirty_lock()
net/rds: convert put_page() to put_user_page*()
net/ceph: convert put_page() to put_user_page*()
x86/kvm: convert put_page() to put_user_page*()
drm/etnaviv: convert release_pages() to put_user_pages()
drm/i915: convert put_page() to put_user_page*()
drm/radeon: convert put_page() to put_user_page*()
media/ivtv: convert put_page() to put_user_page*()
media/v4l2-core/mm: convert put_page() to put_user_page*()
genwqe: convert put_page() to put_user_page*()
scif: convert put_page() to put_user_page*()
vmci: convert put_page() to put_user_page*()
rapidio: convert put_page() to put_user_page*()
oradax: convert put_page() to put_user_page*()
staging/vc04_services: convert put_page() to put_user_page*()
drivers/tee: convert put_page() to put_user_page*()
vfio: convert put_page() to put_user_page*()
fbdev/pvr2fb: convert put_page() to put_user_page*()
fsl_hypervisor: convert put_page() to put_user_page*()
xen: convert put_page() to put_user_page*()
fs/exec.c: convert put_page() to put_user_page*()
orangefs: convert put_page() to put_user_page*()
uprobes: convert put_page() to put_user_page*()
futex: convert put_page() to put_user_page*()
mm/frame_vector.c: convert put_page() to put_user_page*()
mm/gup_benchmark.c: convert put_page() to put_user_page*()
mm/memory.c: convert put_page() to put_user_page*()
mm/madvise.c: convert put_page() to put_user_page*()
mm/process_vm_access.c: convert put_page() to put_user_page*()
crypt: convert put_page() to put_user_page*()
nfs: convert put_page() to put_user_page*()
goldfish_pipe: convert put_page() to put_user_page*()
kernel/events/core.c: convert put_page() to put_user_page*()

arch/x86/kvm/svm.c | 4 +-
crypto/af_alg.c | 7 +-
drivers/gpu/drm/etnaviv/etnaviv_gem.c | 4 +-
drivers/gpu/drm/i915/gem/i915_gem_userptr.c | 9 +-
drivers/gpu/drm/radeon/radeon_ttm.c | 2 +-
drivers/infiniband/core/umem.c | 5 +-
drivers/infiniband/hw/hfi1/user_pages.c | 5 +-
drivers/infiniband/hw/qib/qib_user_pages.c | 5 +-
drivers/infiniband/hw/usnic/usnic_uiom.c | 5 +-
drivers/infiniband/sw/siw/siw_mem.c | 10 +-
drivers/media/pci/ivtv/ivtv-udma.c | 14 +--
drivers/media/pci/ivtv/ivtv-yuv.c | 10 +-
drivers/media/v4l2-core/videobuf-dma-sg.c | 3 +-
drivers/misc/genwqe/card_utils.c | 17 +--
drivers/misc/mic/scif/scif_rma.c | 17 ++-
drivers/misc/vmw_vmci/vmci_context.c | 2 +-
drivers/misc/vmw_vmci/vmci_queue_pair.c | 11 +-
drivers/platform/goldfish/goldfish_pipe.c | 9 +-
drivers/rapidio/devices/rio_mport_cdev.c | 9 +-
drivers/sbus/char/oradax.c | 2 +-
.../interface/vchiq_arm/vchiq_2835_arm.c | 10 +-
drivers/tee/tee_shm.c | 10 +-
drivers/vfio/vfio_iommu_type1.c | 8 +-
drivers/video/fbdev/pvr2fb.c | 3 +-
drivers/virt/fsl_hypervisor.c | 7 +-
drivers/xen/gntdev.c | 5 +-
drivers/xen/privcmd.c | 7 +-
fs/binfmt_elf.c | 2 +-
fs/binfmt_elf_fdpic.c | 2 +-
fs/exec.c | 2 +-
fs/nfs/direct.c | 4 +-
fs/orangefs/orangefs-bufmap.c | 7 +-
include/linux/mm.h | 5 +-
kernel/events/core.c | 2 +-
kernel/events/uprobes.c | 6 +-
kernel/futex.c | 10 +-
mm/frame_vector.c | 4 +-
mm/gup.c | 115 ++++++++----------
mm/gup_benchmark.c | 2 +-
mm/madvise.c | 2 +-
mm/memory.c | 2 +-
mm/process_vm_access.c | 18 +--
net/ceph/pagevec.c | 8 +-
net/rds/info.c | 5 +-
net/rds/message.c | 2 +-
net/rds/rdma.c | 15 ++-
virt/kvm/kvm_main.c | 4 +-
47 files changed, 151 insertions(+), 266 deletions(-)

--
2.22.0


2019-08-02 09:37:50

by Michal Hocko

[permalink] [raw]
Subject: Re: [PATCH 00/34] put_user_pages(): miscellaneous call sites

On Thu 01-08-19 19:19:31, [email protected] wrote:
[...]
> 2) Convert all of the call sites for get_user_pages*(), to
> invoke put_user_page*(), instead of put_page(). This involves dozens of
> call sites, and will take some time.

How do we make sure this is the case and it will remain the case in the
future? There must be some automagic to enforce/check that. It is simply
not manageable to do it every now and then because then 3) will simply
be never safe.

Have you considered coccinele or some other scripted way to do the
transition? I have no idea how to deal with future changes that would
break the balance though.
--
Michal Hocko
SUSE Labs

2019-08-03 14:07:22

by Matthew Wilcox

[permalink] [raw]
Subject: Re: [PATCH 00/34] put_user_pages(): miscellaneous call sites

On Fri, Aug 02, 2019 at 02:41:46PM +0200, Jan Kara wrote:
> On Fri 02-08-19 11:12:44, Michal Hocko wrote:
> > On Thu 01-08-19 19:19:31, [email protected] wrote:
> > [...]
> > > 2) Convert all of the call sites for get_user_pages*(), to
> > > invoke put_user_page*(), instead of put_page(). This involves dozens of
> > > call sites, and will take some time.
> >
> > How do we make sure this is the case and it will remain the case in the
> > future? There must be some automagic to enforce/check that. It is simply
> > not manageable to do it every now and then because then 3) will simply
> > be never safe.
> >
> > Have you considered coccinele or some other scripted way to do the
> > transition? I have no idea how to deal with future changes that would
> > break the balance though.
>
> Yeah, that's why I've been suggesting at LSF/MM that we may need to create
> a gup wrapper - say vaddr_pin_pages() - and track which sites dropping
> references got converted by using this wrapper instead of gup. The
> counterpart would then be more logically named as unpin_page() or whatever
> instead of put_user_page(). Sure this is not completely foolproof (you can
> create new callsite using vaddr_pin_pages() and then just drop refs using
> put_page()) but I suppose it would be a high enough barrier for missed
> conversions... Thoughts?

I think the API we really need is get_user_bvec() / put_user_bvec(),
and I know Christoph has been putting some work into that. That avoids
doing refcount operations on hundreds of pages if the page in question is
a huge page. Once people are switched over to that, they won't be tempted
to manually call put_page() on the individual constituent pages of a bvec.

2019-08-08 02:37:52

by Ira Weiny

[permalink] [raw]
Subject: Re: [PATCH 00/34] put_user_pages(): miscellaneous call sites

On Wed, Aug 07, 2019 at 10:46:49AM +0200, Michal Hocko wrote:
> On Wed 07-08-19 10:37:26, Jan Kara wrote:
> > On Fri 02-08-19 12:14:09, John Hubbard wrote:
> > > On 8/2/19 7:52 AM, Jan Kara wrote:
> > > > On Fri 02-08-19 07:24:43, Matthew Wilcox wrote:
> > > > > On Fri, Aug 02, 2019 at 02:41:46PM +0200, Jan Kara wrote:
> > > > > > On Fri 02-08-19 11:12:44, Michal Hocko wrote:
> > > > > > > On Thu 01-08-19 19:19:31, [email protected] wrote:
> > > > > > > [...]
> > > > > > > > 2) Convert all of the call sites for get_user_pages*(), to
> > > > > > > > invoke put_user_page*(), instead of put_page(). This involves dozens of
> > > > > > > > call sites, and will take some time.
> > > > > > >
> > > > > > > How do we make sure this is the case and it will remain the case in the
> > > > > > > future? There must be some automagic to enforce/check that. It is simply
> > > > > > > not manageable to do it every now and then because then 3) will simply
> > > > > > > be never safe.
> > > > > > >
> > > > > > > Have you considered coccinele or some other scripted way to do the
> > > > > > > transition? I have no idea how to deal with future changes that would
> > > > > > > break the balance though.
> > >
> > > Hi Michal,
> > >
> > > Yes, I've thought about it, and coccinelle falls a bit short (it's not smart
> > > enough to know which put_page()'s to convert). However, there is a debug
> > > option planned: a yet-to-be-posted commit [1] uses struct page extensions
> > > (obviously protected by CONFIG_DEBUG_GET_USER_PAGES_REFERENCES) to add
> > > a redundant counter. That allows:
> > >
> > > void __put_page(struct page *page)
> > > {
> > > ...
> > > /* Someone called put_page() instead of put_user_page() */
> > > WARN_ON_ONCE(atomic_read(&page_ext->pin_count) > 0);
> > >
> > > > > >
> > > > > > Yeah, that's why I've been suggesting at LSF/MM that we may need to create
> > > > > > a gup wrapper - say vaddr_pin_pages() - and track which sites dropping
> > > > > > references got converted by using this wrapper instead of gup. The
> > > > > > counterpart would then be more logically named as unpin_page() or whatever
> > > > > > instead of put_user_page(). Sure this is not completely foolproof (you can
> > > > > > create new callsite using vaddr_pin_pages() and then just drop refs using
> > > > > > put_page()) but I suppose it would be a high enough barrier for missed
> > > > > > conversions... Thoughts?
> > >
> > > The debug option above is still a bit simplistic in its implementation
> > > (and maybe not taking full advantage of the data it has), but I think
> > > it's preferable, because it monitors the "core" and WARNs.
> > >
> > > Instead of the wrapper, I'm thinking: documentation and the passage of
> > > time, plus the debug option (perhaps enhanced--probably once I post it
> > > someone will notice opportunities), yes?
> >
> > So I think your debug option and my suggested renaming serve a bit
> > different purposes (and thus both make sense). If you do the renaming, you
> > can just grep to see unconverted sites. Also when someone merges new GUP
> > user (unaware of the new rules) while you switch GUP to use pins instead of
> > ordinary references, you'll get compilation error in case of renaming
> > instead of hard to debug refcount leak without the renaming. And such
> > conflict is almost bound to happen given the size of GUP patch set... Also
> > the renaming serves against the "coding inertia" - i.e., GUP is around for
> > ages so people just use it without checking any documentation or comments.
> > After switching how GUP works, what used to be correct isn't anymore so
> > renaming the function serves as a warning that something has really
> > changed.
>
> Fully agreed!

Ok Prior to this I've been basing all my work for the RDMA/FS DAX stuff in
Johns put_user_pages()... (Including when I proposed failing truncate with a
lease in June [1])

However, based on the suggestions in that thread it became clear that a new
interface was going to need to be added to pass in the "RDMA file" information
to GUP to associate file pins with the correct processes...

I have many drawings on my white board with "a whole lot of lines" on them to
make sure that if a process opens a file, mmaps it, pins it with RDMA, _closes_
it, and ummaps it; that the resulting file pin can still be traced back to the
RDMA context and all the processes which may have access to it.... No matter
where the original context may have come from. I believe I have accomplished
that.

Before I go on, I would like to say that the "imbalance" of get_user_pages()
and put_page() bothers me from a purist standpoint... However, since this
discussion cropped up I went ahead and ported my work to Linus' current master
(5.3-rc3+) and in doing so I only had to steal a bit of Johns code... Sorry
John... :-(

I don't have the commit messages all cleaned up and I know there may be some
discussion on these new interfaces but I wanted to throw this series out there
because I think it may be what Jan and Michal are driving at (or at least in
that direction.

Right now only RDMA and DAX FS's are supported. Other users of GUP will still
fail on a DAX file and regular files will still be at risk.[2]

I've pushed this work (based 5.3-rc3+ (33920f1ec5bf)) here[3]:

https://github.com/weiny2/linux-kernel/tree/linus-rdmafsdax-b0-v3

I think the most relevant patch to this conversation is:

https://github.com/weiny2/linux-kernel/commit/5d377653ba5cf11c3b716f904b057bee6641aaf6

I stole Jans suggestion for a name as the name I used while prototyping was
pretty bad... So Thanks Jan... ;-)

Also thanks to John for his contribution on some of this. I'm still tweaking
put_user_pages under the hood on the DAX path.

Ira

[1] https://lwn.net/Articles/790544/

[2] I've been looking into how to support io_uring next but I've had some issue
getting a test program to actually call GUP in that code path... :-(

[3] If it would be easier I can just throw an RFC on the list but right now the
cover letter and some of the commit messages are full of the old stuff and
various ideas I have had...

>
> > Your refcount debug patches are good to catch bugs in the conversions done
> > but that requires you to be able to excercise the code path in the first
> > place which may require particular HW or so, and you also have to enable
> > the debug option which means you already aim at verifying the GUP
> > references are treated properly.
> >
> > Honza
> >
> > --
> > Jan Kara <[email protected]>
> > SUSE Labs, CR
>
> --
> Michal Hocko
> SUSE Labs

2019-08-08 03:47:32

by John Hubbard

[permalink] [raw]
Subject: Re: [PATCH 00/34] put_user_pages(): miscellaneous call sites

On 8/7/19 7:36 PM, Ira Weiny wrote:
> On Wed, Aug 07, 2019 at 10:46:49AM +0200, Michal Hocko wrote:
>> On Wed 07-08-19 10:37:26, Jan Kara wrote:
>>> On Fri 02-08-19 12:14:09, John Hubbard wrote:
>>>> On 8/2/19 7:52 AM, Jan Kara wrote:
>>>>> On Fri 02-08-19 07:24:43, Matthew Wilcox wrote:
>>>>>> On Fri, Aug 02, 2019 at 02:41:46PM +0200, Jan Kara wrote:
>>>>>>> On Fri 02-08-19 11:12:44, Michal Hocko wrote:
>>>>>>>> On Thu 01-08-19 19:19:31, [email protected] wrote:
[...]
> Before I go on, I would like to say that the "imbalance" of get_user_pages()
> and put_page() bothers me from a purist standpoint... However, since this
> discussion cropped up I went ahead and ported my work to Linus' current master
> (5.3-rc3+) and in doing so I only had to steal a bit of Johns code... Sorry
> John... :-(
>
> I don't have the commit messages all cleaned up and I know there may be some
> discussion on these new interfaces but I wanted to throw this series out there
> because I think it may be what Jan and Michal are driving at (or at least in
> that direction.
>
> Right now only RDMA and DAX FS's are supported. Other users of GUP will still
> fail on a DAX file and regular files will still be at risk.[2]
>
> I've pushed this work (based 5.3-rc3+ (33920f1ec5bf)) here[3]:
>
> https://github.com/weiny2/linux-kernel/tree/linus-rdmafsdax-b0-v3
>
> I think the most relevant patch to this conversation is:
>
> https://github.com/weiny2/linux-kernel/commit/5d377653ba5cf11c3b716f904b057bee6641aaf6
>

ohhh...can you please avoid using the old __put_user_pages_dirty()
function? I thought I'd caught things early enough to get away with
the rename and deletion of that. You could either:

a) open code an implementation of vaddr_put_pages_dirty_lock() that
doesn't call any of the *put_user_pages_dirty*() variants, or

b) include my first patch ("") are part of your series, or

c) base this on Andrews's tree, which already has merged in my first patch.


thanks,
--
John Hubbard
NVIDIA

2019-08-08 18:20:00

by John Hubbard

[permalink] [raw]
Subject: Re: [PATCH 00/34] put_user_pages(): miscellaneous call sites

On 8/8/19 9:25 AM, Weiny, Ira wrote:
>>
>> On 8/7/19 7:36 PM, Ira Weiny wrote:
>>> On Wed, Aug 07, 2019 at 10:46:49AM +0200, Michal Hocko wrote:
>>>> On Wed 07-08-19 10:37:26, Jan Kara wrote:
>>>>> On Fri 02-08-19 12:14:09, John Hubbard wrote:
>>>>>> On 8/2/19 7:52 AM, Jan Kara wrote:
>>>>>>> On Fri 02-08-19 07:24:43, Matthew Wilcox wrote:
>>>>>>>> On Fri, Aug 02, 2019 at 02:41:46PM +0200, Jan Kara wrote:
>>>>>>>>> On Fri 02-08-19 11:12:44, Michal Hocko wrote:
>>>>>>>>>> On Thu 01-08-19 19:19:31, [email protected] wrote:
>> [...]
> Yep I can do this. I did not realize that Andrew had accepted any of this work. I'll check out his tree. But I don't think he is going to accept this series through his tree. So what is the ETA on that landing in Linus' tree?
>

I'd expect it to go into 5.4, according to my understanding of how
the release cycles are arranged.


> To that point I'm still not sure who would take all this as I am now touching mm, procfs, rdma, ext4, and xfs.
>
> I just thought I would chime in with my progress because I'm to a point where things are working and so I can submit the code but I'm not sure what I can/should depend on landing... Also, now that 0day has run overnight it has found issues with this rebase so I need to clean those up... Perhaps I will base on Andrew's tree prior to doing that...

I'm certainly not the right person to answer, but in spite of that, I'd think
Andrew's tree is a reasonable place for it. Sort of.

thanks,
--
John Hubbard
NVIDIA