hi,
i have a problem mounting two separate directories on the client. the
exports, on the server, are defined as two different directories. and
exportfs -rav outputs the correct ipaddr:/path/to/mount on the server.
when i mount the separate directories on the client "mount -t nfs
ipaddr:/full/path /mnt/hd1" and "mount -t nfs ipaddr:/full/path
/mnt/hd2" both directories on the client /mnt/hd1 and /mnt/hd2 list
the contents of only hd2. for example, on the client, ls /mnt/hd1
outputs the same directories as ls /mnt/hd2. the server has the
correct mount points /dev/sda1 as /mnt/1tb and /dev/sdb1 as
/mnt/320gb.
here is the code to clarify:
# server output of `mount | grep /dev/sd`
/dev/sda1 on /mnt/1tb type vfat (rw,noexec,nosuid,nodev,umask=000)
/dev/sdb1 on /mnt/320gb type vfat (rw,noexec,nosuid,nodev,umask=000)
# notes two different harddrives here, so the directories in each are different.
# server output of `cat /etc/exports`
/mnt/1tb client-ipaddress(rw,fsid=0,subtree_check,no_root_squash,crossmnt,async)
/mnt/320gb client-ipaddress(rw,fsid=0,subtree_check,no_root_squash,crossmnt,async)
# server output of `exportfs -rav`
exporting client-ipaddress:/mnt/1tb
exporting client-ipaddress:/mnt/320gb
### end of server ###
### client ###
# client commands
mount -t nfs server-ip:/mnt/1tb /mnt/nfs-1tb
mount -t nfs server-ip:/mnt/320gb /mnt/nfs-320gb
# client output of `mount | grep server-ip`
server-ip:/mnt/1tb on /mnt/nfs-1tb (rw,addr=server-ip)
server-ip:/mnt/320gb on /mnt/nfs-320gb (rw,addr=server-ip)
# client output of `ls /mnt/nfs-1tb` == `ls /mnt/nfs-320gb`
# note the client output of these two commands should be the contents
of server /dev/sda1 then server /dev/sdb1
my question is: how do i mount the two directories separately in order
to list contents of both harddrives? is there a separator in
/etc/exports that i am missing, causing it to read only the second
export?
is there anything i am missing here?
On Sun, Dec 20, 2009 at 11:33 PM, f3ar007 <[email protected]> wrote:
> hi,
>
> i have a problem mounting two separate directories on the client. =A0=
the
> exports, on the server, are defined as two different directories. =A0=
and
> exportfs -rav outputs the correct ipaddr:/path/to/mount on the server=
=2E
> =A0when i mount the separate directories on the client "mount -t nfs
> ipaddr:/full/path /mnt/hd1" and "mount -t nfs ipaddr:/full/path
> /mnt/hd2" both directories on the client /mnt/hd1 and /mnt/hd2 list
> the contents of only hd2. =A0for example, on the client, ls /mnt/hd1
> outputs the same directories as ls /mnt/hd2. =A0the server has the
> correct mount points /dev/sda1 as /mnt/1tb and /dev/sdb1 as
> /mnt/320gb.
>
> here is the code to clarify:
>
> # server output of `mount | grep /dev/sd`
> /dev/sda1 =A0on =A0/mnt/1tb =A0 =A0 =A0type vfat =A0(rw,noexec,nosuid=
,nodev,umask=3D000)
> /dev/sdb1 =A0on =A0/mnt/320gb =A0type vfat =A0(rw,noexec,nosuid,nodev=
,umask=3D000)
> # notes two different harddrives here, so the directories in each are=
different.
>
> # server output of `cat /etc/exports`
> /mnt/1tb =A0 =A0 client-ipaddress(rw,fsid=3D0,subtree_check,no_root_s=
quash,crossmnt,async)
> /mnt/320gb client-ipaddress(rw,fsid=3D0,subtree_check,no_root_squash,=
crossmnt,async)
I think the problem is that you have specified that both are fsid=3D0.
There should only be one export with fsid=3D0