I think that patch introduces a problem. Since the checking for the
change in ctime was removed by the commit it leads to (improper) cache
invalidation in NFSv3.
Test is write 10240bytes to the server then read it. Expectation is
not to see read on the wire. In the test the write is spread over
3rpcs.
On the 1nd reply
fattr->gencount=33 nfsi->gencount=32 generation_counter=35
On the 2nd reply
fattr->gencount=34 nfsi->gencount=36 generation_counter=36
In the code when processing 2nd reply,
nfs_post_op_update_inode_force_wcc_locked() calls into
nfs_inode_attrs_need_update() it determines that it doesn't need to
update them (even though the size and the time have changed). so it
doesn't call nfs_wcc_update_inode() so the inode->i_version doesn't
get set to the ctime that was received in the 2nd reply.
On the 3rd reply
fattr->gencount=37 nfsi->gencount=36 generation_counter=37
It leads to nfs_inode_attrs_need_update() returns 1 and in the
nfs_update_inode() the difference in the ctimes leads to invalidation.
fattr->gencount was update from nfs_writeback_update_node() ->
nfs_post_op_update_inode_force_wcc() calling nfs_fattr_set_barrier().
I'm not sure what appropriate values for "gencount" should have been.
But if the check for nfs_ctime_need_update() was still there in
nfs_inode_attrs_need_update() then the 2nd reply would have
appropriately updated the i_version and not lead to invalidation.
On Tue, Mar 29, 2016 at 3:47 PM, Olga Kornievskaia <[email protected]> wrote:
> I think that patch introduces a problem. Since the checking for the
> change in ctime was removed by the commit it leads to (improper) cache
> invalidation in NFSv3.
>
> Test is write 10240bytes to the server then read it. Expectation is
> not to see read on the wire. In the test the write is spread over
> 3rpcs.
>
> On the 1nd reply
> fattr->gencount=33 nfsi->gencount=32 generation_counter=35
> On the 2nd reply
> fattr->gencount=34 nfsi->gencount=36 generation_counter=36
>
> In the code when processing 2nd reply,
> nfs_post_op_update_inode_force_wcc_locked() calls into
> nfs_inode_attrs_need_update() it determines that it doesn't need to
> update them (even though the size and the time have changed). so it
> doesn't call nfs_wcc_update_inode() so the inode->i_version doesn't
> get set to the ctime that was received in the 2nd reply.
>
> On the 3rd reply
> fattr->gencount=37 nfsi->gencount=36 generation_counter=37
>
> It leads to nfs_inode_attrs_need_update() returns 1 and in the
> nfs_update_inode() the difference in the ctimes leads to invalidation.
> fattr->gencount was update from nfs_writeback_update_node() ->
> nfs_post_op_update_inode_force_wcc() calling nfs_fattr_set_barrier().
>
> I'm not sure what appropriate values for "gencount" should have been.
> But if the check for nfs_ctime_need_update() was still there in
> nfs_inode_attrs_need_update() then the 2nd reply would have
> appropriately updated the i_version and not lead to invalidation.
Would like to add that this problem is not seen against the Linux
server because it doesn't send "before" attributes. So code doesn't
set the "pre_change_attr" which later doesn't make what's stored in
inode->i_version.
The problem also not seen for v4 because pre_change_attr is not gotten
from the "before" attributes but instead from the previous value in
inode->i_version which is then compared to the itself.
If reverting the problematic commit is not the solution, then how
about ignoring the "before" ctime attributes sent by the server. This
also helps with the out-of-order RPCs.
diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c
index 267126d..feca07f 100644
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -732,14 +732,12 @@ static int decode_wcc_attr(struct xdr_stream
*xdr, struct nfs_fattr *fattr)
goto out_overflow;
fattr->valid |= NFS_ATTR_FATTR_PRESIZE
- | NFS_ATTR_FATTR_PRECHANGE
| NFS_ATTR_FATTR_PREMTIME
| NFS_ATTR_FATTR_PRECTIME;
p = xdr_decode_size3(p, &fattr->pre_size);
p = xdr_decode_nfstime3(p, &fattr->pre_mtime);
xdr_decode_nfstime3(p, &fattr->pre_ctime);
- fattr->pre_change_attr = nfs_timespec_to_change_attr(&fattr->pre_ctime);
return 0;
out_overflow:
On Wed, Mar 30, 2016 at 5:02 PM, Olga Kornievskaia <[email protected]> wrote:
> On Tue, Mar 29, 2016 at 3:47 PM, Olga Kornievskaia <[email protected]> wrote:
>> I think that patch introduces a problem. Since the checking for the
>> change in ctime was removed by the commit it leads to (improper) cache
>> invalidation in NFSv3.
>>
>> Test is write 10240bytes to the server then read it. Expectation is
>> not to see read on the wire. In the test the write is spread over
>> 3rpcs.
>>
>> On the 1nd reply
>> fattr->gencount=33 nfsi->gencount=32 generation_counter=35
>> On the 2nd reply
>> fattr->gencount=34 nfsi->gencount=36 generation_counter=36
>>
>> In the code when processing 2nd reply,
>> nfs_post_op_update_inode_force_wcc_locked() calls into
>> nfs_inode_attrs_need_update() it determines that it doesn't need to
>> update them (even though the size and the time have changed). so it
>> doesn't call nfs_wcc_update_inode() so the inode->i_version doesn't
>> get set to the ctime that was received in the 2nd reply.
>>
>> On the 3rd reply
>> fattr->gencount=37 nfsi->gencount=36 generation_counter=37
>>
>> It leads to nfs_inode_attrs_need_update() returns 1 and in the
>> nfs_update_inode() the difference in the ctimes leads to invalidation.
>> fattr->gencount was update from nfs_writeback_update_node() ->
>> nfs_post_op_update_inode_force_wcc() calling nfs_fattr_set_barrier().
>>
>> I'm not sure what appropriate values for "gencount" should have been.
>> But if the check for nfs_ctime_need_update() was still there in
>> nfs_inode_attrs_need_update() then the 2nd reply would have
>> appropriately updated the i_version and not lead to invalidation.
>
> Would like to add that this problem is not seen against the Linux
> server because it doesn't send "before" attributes. So code doesn't
> set the "pre_change_attr" which later doesn't make what's stored in
> inode->i_version.
>
> The problem also not seen for v4 because pre_change_attr is not gotten
> from the "before" attributes but instead from the previous value in
> inode->i_version which is then compared to the itself.
>
> If reverting the problematic commit is not the solution, then how
> about ignoring the "before" ctime attributes sent by the server. This
> also helps with the out-of-order RPCs.
Why bother doing that on the client? These attributes aren't mandatory
to send...
Cheers
Trond
On Wed, Mar 30, 2016 at 5:45 PM, Trond Myklebust
<[email protected]> wrote:
> On Wed, Mar 30, 2016 at 5:02 PM, Olga Kornievskaia <[email protected]> wrote:
>> On Tue, Mar 29, 2016 at 3:47 PM, Olga Kornievskaia <[email protected]> wrote:
>>> I think that patch introduces a problem. Since the checking for the
>>> change in ctime was removed by the commit it leads to (improper) cache
>>> invalidation in NFSv3.
>>>
>>> Test is write 10240bytes to the server then read it. Expectation is
>>> not to see read on the wire. In the test the write is spread over
>>> 3rpcs.
>>>
>>> On the 1nd reply
>>> fattr->gencount=33 nfsi->gencount=32 generation_counter=35
>>> On the 2nd reply
>>> fattr->gencount=34 nfsi->gencount=36 generation_counter=36
>>>
>>> In the code when processing 2nd reply,
>>> nfs_post_op_update_inode_force_wcc_locked() calls into
>>> nfs_inode_attrs_need_update() it determines that it doesn't need to
>>> update them (even though the size and the time have changed). so it
>>> doesn't call nfs_wcc_update_inode() so the inode->i_version doesn't
>>> get set to the ctime that was received in the 2nd reply.
>>>
>>> On the 3rd reply
>>> fattr->gencount=37 nfsi->gencount=36 generation_counter=37
>>>
>>> It leads to nfs_inode_attrs_need_update() returns 1 and in the
>>> nfs_update_inode() the difference in the ctimes leads to invalidation.
>>> fattr->gencount was update from nfs_writeback_update_node() ->
>>> nfs_post_op_update_inode_force_wcc() calling nfs_fattr_set_barrier().
>>>
>>> I'm not sure what appropriate values for "gencount" should have been.
>>> But if the check for nfs_ctime_need_update() was still there in
>>> nfs_inode_attrs_need_update() then the 2nd reply would have
>>> appropriately updated the i_version and not lead to invalidation.
>>
>> Would like to add that this problem is not seen against the Linux
>> server because it doesn't send "before" attributes. So code doesn't
>> set the "pre_change_attr" which later doesn't make what's stored in
>> inode->i_version.
>>
>> The problem also not seen for v4 because pre_change_attr is not gotten
>> from the "before" attributes but instead from the previous value in
>> inode->i_version which is then compared to the itself.
>>
>> If reverting the problematic commit is not the solution, then how
>> about ignoring the "before" ctime attributes sent by the server. This
>> also helps with the out-of-order RPCs.
>
> Why bother doing that on the client? These attributes aren't mandatory
> to send...
>
Leads to poor client performances. Every large enough read invalidates
the cache so all the reads go to the server always.
On Wed, Mar 30, 2016 at 5:51 PM, Olga Kornievskaia <[email protected]> wrote:
> On Wed, Mar 30, 2016 at 5:45 PM, Trond Myklebust
> <[email protected]> wrote:
>> On Wed, Mar 30, 2016 at 5:02 PM, Olga Kornievskaia <[email protected]> wrote:
>>> On Tue, Mar 29, 2016 at 3:47 PM, Olga Kornievskaia <[email protected]> wrote:
>>>> I think that patch introduces a problem. Since the checking for the
>>>> change in ctime was removed by the commit it leads to (improper) cache
>>>> invalidation in NFSv3.
>>>>
>>>> Test is write 10240bytes to the server then read it. Expectation is
>>>> not to see read on the wire. In the test the write is spread over
>>>> 3rpcs.
>>>>
>>>> On the 1nd reply
>>>> fattr->gencount=33 nfsi->gencount=32 generation_counter=35
>>>> On the 2nd reply
>>>> fattr->gencount=34 nfsi->gencount=36 generation_counter=36
>>>>
>>>> In the code when processing 2nd reply,
>>>> nfs_post_op_update_inode_force_wcc_locked() calls into
>>>> nfs_inode_attrs_need_update() it determines that it doesn't need to
>>>> update them (even though the size and the time have changed). so it
>>>> doesn't call nfs_wcc_update_inode() so the inode->i_version doesn't
>>>> get set to the ctime that was received in the 2nd reply.
>>>>
>>>> On the 3rd reply
>>>> fattr->gencount=37 nfsi->gencount=36 generation_counter=37
>>>>
>>>> It leads to nfs_inode_attrs_need_update() returns 1 and in the
>>>> nfs_update_inode() the difference in the ctimes leads to invalidation.
>>>> fattr->gencount was update from nfs_writeback_update_node() ->
>>>> nfs_post_op_update_inode_force_wcc() calling nfs_fattr_set_barrier().
>>>>
>>>> I'm not sure what appropriate values for "gencount" should have been.
>>>> But if the check for nfs_ctime_need_update() was still there in
>>>> nfs_inode_attrs_need_update() then the 2nd reply would have
>>>> appropriately updated the i_version and not lead to invalidation.
>>>
>>> Would like to add that this problem is not seen against the Linux
>>> server because it doesn't send "before" attributes. So code doesn't
>>> set the "pre_change_attr" which later doesn't make what's stored in
>>> inode->i_version.
>>>
>>> The problem also not seen for v4 because pre_change_attr is not gotten
>>> from the "before" attributes but instead from the previous value in
>>> inode->i_version which is then compared to the itself.
>>>
>>> If reverting the problematic commit is not the solution, then how
>>> about ignoring the "before" ctime attributes sent by the server. This
>>> also helps with the out-of-order RPCs.
>>
>> Why bother doing that on the client? These attributes aren't mandatory
>> to send...
>>
>
> Leads to poor client performances. Every large enough read invalidates
> the cache so all the reads go to the server always.
I'm saying why not just turn off the WCC functionality on the server then.
On Wed, Mar 30, 2016 at 7:32 PM, Trond Myklebust
<[email protected]> wrote:
> On Wed, Mar 30, 2016 at 5:51 PM, Olga Kornievskaia <[email protected]> wrote:
>> On Wed, Mar 30, 2016 at 5:45 PM, Trond Myklebust
>> <[email protected]> wrote:
>>> On Wed, Mar 30, 2016 at 5:02 PM, Olga Kornievskaia <[email protected]> wrote:
>>>> On Tue, Mar 29, 2016 at 3:47 PM, Olga Kornievskaia <[email protected]> wrote:
>>>>> I think that patch introduces a problem. Since the checking for the
>>>>> change in ctime was removed by the commit it leads to (improper) cache
>>>>> invalidation in NFSv3.
>>>>>
>>>>> Test is write 10240bytes to the server then read it. Expectation is
>>>>> not to see read on the wire. In the test the write is spread over
>>>>> 3rpcs.
>>>>>
>>>>> On the 1nd reply
>>>>> fattr->gencount=33 nfsi->gencount=32 generation_counter=35
>>>>> On the 2nd reply
>>>>> fattr->gencount=34 nfsi->gencount=36 generation_counter=36
>>>>>
>>>>> In the code when processing 2nd reply,
>>>>> nfs_post_op_update_inode_force_wcc_locked() calls into
>>>>> nfs_inode_attrs_need_update() it determines that it doesn't need to
>>>>> update them (even though the size and the time have changed). so it
>>>>> doesn't call nfs_wcc_update_inode() so the inode->i_version doesn't
>>>>> get set to the ctime that was received in the 2nd reply.
>>>>>
>>>>> On the 3rd reply
>>>>> fattr->gencount=37 nfsi->gencount=36 generation_counter=37
>>>>>
>>>>> It leads to nfs_inode_attrs_need_update() returns 1 and in the
>>>>> nfs_update_inode() the difference in the ctimes leads to invalidation.
>>>>> fattr->gencount was update from nfs_writeback_update_node() ->
>>>>> nfs_post_op_update_inode_force_wcc() calling nfs_fattr_set_barrier().
>>>>>
>>>>> I'm not sure what appropriate values for "gencount" should have been.
>>>>> But if the check for nfs_ctime_need_update() was still there in
>>>>> nfs_inode_attrs_need_update() then the 2nd reply would have
>>>>> appropriately updated the i_version and not lead to invalidation.
>>>>
>>>> Would like to add that this problem is not seen against the Linux
>>>> server because it doesn't send "before" attributes. So code doesn't
>>>> set the "pre_change_attr" which later doesn't make what's stored in
>>>> inode->i_version.
>>>>
>>>> The problem also not seen for v4 because pre_change_attr is not gotten
>>>> from the "before" attributes but instead from the previous value in
>>>> inode->i_version which is then compared to the itself.
>>>>
>>>> If reverting the problematic commit is not the solution, then how
>>>> about ignoring the "before" ctime attributes sent by the server. This
>>>> also helps with the out-of-order RPCs.
>>>
>>> Why bother doing that on the client? These attributes aren't mandatory
>>> to send...
>>>
>>
>> Leads to poor client performances. Every large enough read invalidates
>> the cache so all the reads go to the server always.
>
> I'm saying why not just turn off the WCC functionality on the server then.
One reasoning could be that providing cache consistency is client's
responsibility. Server only provides needed information.
While I can see that handling out-of-order RPCs might not be worth it
because hopefully it doesn't happen often but handling in order RPCs
and always invalidating the cache is a bug.
On Thu, Mar 31, 2016 at 10:15 AM, Olga Kornievskaia <[email protected]> wrote:
> On Wed, Mar 30, 2016 at 7:32 PM, Trond Myklebust
> <[email protected]> wrote:
>> On Wed, Mar 30, 2016 at 5:51 PM, Olga Kornievskaia <[email protected]> wrote:
>>> On Wed, Mar 30, 2016 at 5:45 PM, Trond Myklebust
>>> <[email protected]> wrote:
>>>> On Wed, Mar 30, 2016 at 5:02 PM, Olga Kornievskaia <[email protected]> wrote:
>>>>> On Tue, Mar 29, 2016 at 3:47 PM, Olga Kornievskaia <[email protected]> wrote:
>>>>>> I think that patch introduces a problem. Since the checking for the
>>>>>> change in ctime was removed by the commit it leads to (improper) cache
>>>>>> invalidation in NFSv3.
>>>>>>
>>>>>> Test is write 10240bytes to the server then read it. Expectation is
>>>>>> not to see read on the wire. In the test the write is spread over
>>>>>> 3rpcs.
>>>>>>
>>>>>> On the 1nd reply
>>>>>> fattr->gencount=33 nfsi->gencount=32 generation_counter=35
>>>>>> On the 2nd reply
>>>>>> fattr->gencount=34 nfsi->gencount=36 generation_counter=36
>>>>>>
>>>>>> In the code when processing 2nd reply,
>>>>>> nfs_post_op_update_inode_force_wcc_locked() calls into
>>>>>> nfs_inode_attrs_need_update() it determines that it doesn't need to
>>>>>> update them (even though the size and the time have changed). so it
>>>>>> doesn't call nfs_wcc_update_inode() so the inode->i_version doesn't
>>>>>> get set to the ctime that was received in the 2nd reply.
>>>>>>
>>>>>> On the 3rd reply
>>>>>> fattr->gencount=37 nfsi->gencount=36 generation_counter=37
>>>>>>
>>>>>> It leads to nfs_inode_attrs_need_update() returns 1 and in the
>>>>>> nfs_update_inode() the difference in the ctimes leads to invalidation.
>>>>>> fattr->gencount was update from nfs_writeback_update_node() ->
>>>>>> nfs_post_op_update_inode_force_wcc() calling nfs_fattr_set_barrier().
>>>>>>
>>>>>> I'm not sure what appropriate values for "gencount" should have been.
>>>>>> But if the check for nfs_ctime_need_update() was still there in
>>>>>> nfs_inode_attrs_need_update() then the 2nd reply would have
>>>>>> appropriately updated the i_version and not lead to invalidation.
>>>>>
>>>>> Would like to add that this problem is not seen against the Linux
>>>>> server because it doesn't send "before" attributes. So code doesn't
>>>>> set the "pre_change_attr" which later doesn't make what's stored in
>>>>> inode->i_version.
>>>>>
>>>>> The problem also not seen for v4 because pre_change_attr is not gotten
>>>>> from the "before" attributes but instead from the previous value in
>>>>> inode->i_version which is then compared to the itself.
>>>>>
>>>>> If reverting the problematic commit is not the solution, then how
>>>>> about ignoring the "before" ctime attributes sent by the server. This
>>>>> also helps with the out-of-order RPCs.
>>>>
>>>> Why bother doing that on the client? These attributes aren't mandatory
>>>> to send...
>>>>
>>>
>>> Leads to poor client performances. Every large enough read invalidates
>>> the cache so all the reads go to the server always.
>>
>> I'm saying why not just turn off the WCC functionality on the server then.
>
> One reasoning could be that providing cache consistency is client's
> responsibility. Server only provides needed information.
Sure, but the server is the single point of control for all clients.
> While I can see that handling out-of-order RPCs might not be worth it
> because hopefully it doesn't happen often but handling in order RPCs
> and always invalidating the cache is a bug.
We don't invalidate on in-order RPCs.
On Thu, Mar 31, 2016 at 10:21 AM, Trond Myklebust
<[email protected]> wrote:
> On Thu, Mar 31, 2016 at 10:15 AM, Olga Kornievskaia <[email protected]> wrote:
>> On Wed, Mar 30, 2016 at 7:32 PM, Trond Myklebust
>> <[email protected]> wrote:
>>> On Wed, Mar 30, 2016 at 5:51 PM, Olga Kornievskaia <[email protected]> wrote:
>>>> On Wed, Mar 30, 2016 at 5:45 PM, Trond Myklebust
>>>> <[email protected]> wrote:
>>>>> On Wed, Mar 30, 2016 at 5:02 PM, Olga Kornievskaia <[email protected]> wrote:
>>>>>> On Tue, Mar 29, 2016 at 3:47 PM, Olga Kornievskaia <[email protected]> wrote:
>>>>>>> I think that patch introduces a problem. Since the checking for the
>>>>>>> change in ctime was removed by the commit it leads to (improper) cache
>>>>>>> invalidation in NFSv3.
>>>>>>>
>>>>>>> Test is write 10240bytes to the server then read it. Expectation is
>>>>>>> not to see read on the wire. In the test the write is spread over
>>>>>>> 3rpcs.
>>>>>>>
>>>>>>> On the 1nd reply
>>>>>>> fattr->gencount=33 nfsi->gencount=32 generation_counter=35
>>>>>>> On the 2nd reply
>>>>>>> fattr->gencount=34 nfsi->gencount=36 generation_counter=36
>>>>>>>
>>>>>>> In the code when processing 2nd reply,
>>>>>>> nfs_post_op_update_inode_force_wcc_locked() calls into
>>>>>>> nfs_inode_attrs_need_update() it determines that it doesn't need to
>>>>>>> update them (even though the size and the time have changed). so it
>>>>>>> doesn't call nfs_wcc_update_inode() so the inode->i_version doesn't
>>>>>>> get set to the ctime that was received in the 2nd reply.
>>>>>>>
>>>>>>> On the 3rd reply
>>>>>>> fattr->gencount=37 nfsi->gencount=36 generation_counter=37
>>>>>>>
>>>>>>> It leads to nfs_inode_attrs_need_update() returns 1 and in the
>>>>>>> nfs_update_inode() the difference in the ctimes leads to invalidation.
>>>>>>> fattr->gencount was update from nfs_writeback_update_node() ->
>>>>>>> nfs_post_op_update_inode_force_wcc() calling nfs_fattr_set_barrier().
>>>>>>>
>>>>>>> I'm not sure what appropriate values for "gencount" should have been.
>>>>>>> But if the check for nfs_ctime_need_update() was still there in
>>>>>>> nfs_inode_attrs_need_update() then the 2nd reply would have
>>>>>>> appropriately updated the i_version and not lead to invalidation.
>>>>>>
>>>>>> Would like to add that this problem is not seen against the Linux
>>>>>> server because it doesn't send "before" attributes. So code doesn't
>>>>>> set the "pre_change_attr" which later doesn't make what's stored in
>>>>>> inode->i_version.
>>>>>>
>>>>>> The problem also not seen for v4 because pre_change_attr is not gotten
>>>>>> from the "before" attributes but instead from the previous value in
>>>>>> inode->i_version which is then compared to the itself.
>>>>>>
>>>>>> If reverting the problematic commit is not the solution, then how
>>>>>> about ignoring the "before" ctime attributes sent by the server. This
>>>>>> also helps with the out-of-order RPCs.
>>>>>
>>>>> Why bother doing that on the client? These attributes aren't mandatory
>>>>> to send...
>>>>>
>>>>
>>>> Leads to poor client performances. Every large enough read invalidates
>>>> the cache so all the reads go to the server always.
>>>
>>> I'm saying why not just turn off the WCC functionality on the server then.
>>
>> One reasoning could be that providing cache consistency is client's
>> responsibility. Server only provides needed information.
>
> Sure, but the server is the single point of control for all clients.
What about other client implementations that might use before attributes?
>> While I can see that handling out-of-order RPCs might not be worth it
>> because hopefully it doesn't happen often but handling in order RPCs
>> and always invalidating the cache is a bug.
>
> We don't invalidate on in-order RPCs.
Yes we do and that was the point of my initial post. The commit
introduced a regression.
On Thu, Mar 31, 2016 at 10:36 AM, Olga Kornievskaia <[email protected]> wrote:
> On Thu, Mar 31, 2016 at 10:21 AM, Trond Myklebust
> <[email protected]> wrote:
>> On Thu, Mar 31, 2016 at 10:15 AM, Olga Kornievskaia <[email protected]> wrote:
>>> On Wed, Mar 30, 2016 at 7:32 PM, Trond Myklebust
>>> <[email protected]> wrote:
>>>> On Wed, Mar 30, 2016 at 5:51 PM, Olga Kornievskaia <[email protected]> wrote:
>>>>> On Wed, Mar 30, 2016 at 5:45 PM, Trond Myklebust
>>>>> <[email protected]> wrote:
>>>>>> On Wed, Mar 30, 2016 at 5:02 PM, Olga Kornievskaia <[email protected]> wrote:
>>>>>>> On Tue, Mar 29, 2016 at 3:47 PM, Olga Kornievskaia <[email protected]> wrote:
>>>>>>>> I think that patch introduces a problem. Since the checking for the
>>>>>>>> change in ctime was removed by the commit it leads to (improper) cache
>>>>>>>> invalidation in NFSv3.
>>>>>>>>
>>>>>>>> Test is write 10240bytes to the server then read it. Expectation is
>>>>>>>> not to see read on the wire. In the test the write is spread over
>>>>>>>> 3rpcs.
>>>>>>>>
>>>>>>>> On the 1nd reply
>>>>>>>> fattr->gencount=33 nfsi->gencount=32 generation_counter=35
>>>>>>>> On the 2nd reply
>>>>>>>> fattr->gencount=34 nfsi->gencount=36 generation_counter=36
>>>>>>>>
>>>>>>>> In the code when processing 2nd reply,
>>>>>>>> nfs_post_op_update_inode_force_wcc_locked() calls into
>>>>>>>> nfs_inode_attrs_need_update() it determines that it doesn't need to
>>>>>>>> update them (even though the size and the time have changed). so it
>>>>>>>> doesn't call nfs_wcc_update_inode() so the inode->i_version doesn't
>>>>>>>> get set to the ctime that was received in the 2nd reply.
>>>>>>>>
>>>>>>>> On the 3rd reply
>>>>>>>> fattr->gencount=37 nfsi->gencount=36 generation_counter=37
>>>>>>>>
>>>>>>>> It leads to nfs_inode_attrs_need_update() returns 1 and in the
>>>>>>>> nfs_update_inode() the difference in the ctimes leads to invalidation.
>>>>>>>> fattr->gencount was update from nfs_writeback_update_node() ->
>>>>>>>> nfs_post_op_update_inode_force_wcc() calling nfs_fattr_set_barrier().
>>>>>>>>
>>>>>>>> I'm not sure what appropriate values for "gencount" should have been.
>>>>>>>> But if the check for nfs_ctime_need_update() was still there in
>>>>>>>> nfs_inode_attrs_need_update() then the 2nd reply would have
>>>>>>>> appropriately updated the i_version and not lead to invalidation.
>>>>>>>
>>>>>>> Would like to add that this problem is not seen against the Linux
>>>>>>> server because it doesn't send "before" attributes. So code doesn't
>>>>>>> set the "pre_change_attr" which later doesn't make what's stored in
>>>>>>> inode->i_version.
>>>>>>>
>>>>>>> The problem also not seen for v4 because pre_change_attr is not gotten
>>>>>>> from the "before" attributes but instead from the previous value in
>>>>>>> inode->i_version which is then compared to the itself.
>>>>>>>
>>>>>>> If reverting the problematic commit is not the solution, then how
>>>>>>> about ignoring the "before" ctime attributes sent by the server. This
>>>>>>> also helps with the out-of-order RPCs.
>>>>>>
>>>>>> Why bother doing that on the client? These attributes aren't mandatory
>>>>>> to send...
>>>>>>
>>>>>
>>>>> Leads to poor client performances. Every large enough read invalidates
>>>>> the cache so all the reads go to the server always.
>>>>
>>>> I'm saying why not just turn off the WCC functionality on the server then.
>>>
>>> One reasoning could be that providing cache consistency is client's
>>> responsibility. Server only provides needed information.
>>
>> Sure, but the server is the single point of control for all clients.
>
> What about other client implementations that might use before attributes?
>
>>> While I can see that handling out-of-order RPCs might not be worth it
>>> because hopefully it doesn't happen often but handling in order RPCs
>>> and always invalidating the cache is a bug.
>>
>> We don't invalidate on in-order RPCs.
>
> Yes we do and that was the point of my initial post. The commit
> introduced a regression.
No we don't. If the RPC replies were received in the order in which
they were processed on the server, then the WCC information would
match what is currently in the client cache. Your patch turns off WCC
processing on the client in order to avoid that ordering problem by
having the client fill in WCC info that matches what is in its cache.
On Thu, Mar 31, 2016 at 11:16 AM, Trond Myklebust
<[email protected]> wrote:
> On Thu, Mar 31, 2016 at 10:36 AM, Olga Kornievskaia <[email protected]> wrote:
>> On Thu, Mar 31, 2016 at 10:21 AM, Trond Myklebust
>> <[email protected]> wrote:
>>> On Thu, Mar 31, 2016 at 10:15 AM, Olga Kornievskaia <[email protected]> wrote:
>>>> On Wed, Mar 30, 2016 at 7:32 PM, Trond Myklebust
>>>> <[email protected]> wrote:
>>>>> On Wed, Mar 30, 2016 at 5:51 PM, Olga Kornievskaia <[email protected]> wrote:
>>>>>> On Wed, Mar 30, 2016 at 5:45 PM, Trond Myklebust
>>>>>> <[email protected]> wrote:
>>>>>>> On Wed, Mar 30, 2016 at 5:02 PM, Olga Kornievskaia <[email protected]> wrote:
>>>>>>>> On Tue, Mar 29, 2016 at 3:47 PM, Olga Kornievskaia <[email protected]> wrote:
>>>>>>>>> I think that patch introduces a problem. Since the checking for the
>>>>>>>>> change in ctime was removed by the commit it leads to (improper) cache
>>>>>>>>> invalidation in NFSv3.
>>>>>>>>>
>>>>>>>>> Test is write 10240bytes to the server then read it. Expectation is
>>>>>>>>> not to see read on the wire. In the test the write is spread over
>>>>>>>>> 3rpcs.
>>>>>>>>>
>>>>>>>>> On the 1nd reply
>>>>>>>>> fattr->gencount=33 nfsi->gencount=32 generation_counter=35
>>>>>>>>> On the 2nd reply
>>>>>>>>> fattr->gencount=34 nfsi->gencount=36 generation_counter=36
>>>>>>>>>
>>>>>>>>> In the code when processing 2nd reply,
>>>>>>>>> nfs_post_op_update_inode_force_wcc_locked() calls into
>>>>>>>>> nfs_inode_attrs_need_update() it determines that it doesn't need to
>>>>>>>>> update them (even though the size and the time have changed). so it
>>>>>>>>> doesn't call nfs_wcc_update_inode() so the inode->i_version doesn't
>>>>>>>>> get set to the ctime that was received in the 2nd reply.
>>>>>>>>>
>>>>>>>>> On the 3rd reply
>>>>>>>>> fattr->gencount=37 nfsi->gencount=36 generation_counter=37
>>>>>>>>>
>>>>>>>>> It leads to nfs_inode_attrs_need_update() returns 1 and in the
>>>>>>>>> nfs_update_inode() the difference in the ctimes leads to invalidation.
>>>>>>>>> fattr->gencount was update from nfs_writeback_update_node() ->
>>>>>>>>> nfs_post_op_update_inode_force_wcc() calling nfs_fattr_set_barrier().
>>>>>>>>>
>>>>>>>>> I'm not sure what appropriate values for "gencount" should have been.
>>>>>>>>> But if the check for nfs_ctime_need_update() was still there in
>>>>>>>>> nfs_inode_attrs_need_update() then the 2nd reply would have
>>>>>>>>> appropriately updated the i_version and not lead to invalidation.
>>>>>>>>
>>>>>>>> Would like to add that this problem is not seen against the Linux
>>>>>>>> server because it doesn't send "before" attributes. So code doesn't
>>>>>>>> set the "pre_change_attr" which later doesn't make what's stored in
>>>>>>>> inode->i_version.
>>>>>>>>
>>>>>>>> The problem also not seen for v4 because pre_change_attr is not gotten
>>>>>>>> from the "before" attributes but instead from the previous value in
>>>>>>>> inode->i_version which is then compared to the itself.
>>>>>>>>
>>>>>>>> If reverting the problematic commit is not the solution, then how
>>>>>>>> about ignoring the "before" ctime attributes sent by the server. This
>>>>>>>> also helps with the out-of-order RPCs.
>>>>>>>
>>>>>>> Why bother doing that on the client? These attributes aren't mandatory
>>>>>>> to send...
>>>>>>>
>>>>>>
>>>>>> Leads to poor client performances. Every large enough read invalidates
>>>>>> the cache so all the reads go to the server always.
>>>>>
>>>>> I'm saying why not just turn off the WCC functionality on the server then.
>>>>
>>>> One reasoning could be that providing cache consistency is client's
>>>> responsibility. Server only provides needed information.
>>>
>>> Sure, but the server is the single point of control for all clients.
>>
>> What about other client implementations that might use before attributes?
>>
>>>> While I can see that handling out-of-order RPCs might not be worth it
>>>> because hopefully it doesn't happen often but handling in order RPCs
>>>> and always invalidating the cache is a bug.
>>>
>>> We don't invalidate on in-order RPCs.
>>
>> Yes we do and that was the point of my initial post. The commit
>> introduced a regression.
>
> No we don't. If the RPC replies were received in the order in which
> they were processed on the server, then the WCC information would
> match what is currently in the client cache. Your patch turns off WCC
> processing on the client in order to avoid that ordering problem by
> having the client fill in WCC info that matches what is in its cache.
The RPCs are returned in order.
The problem is when the 2nd reply is gotten the attributes are not
updated. When the 3rd reply is processed it finds the attributes no
longer match.
The attributes should have been updated. They would have been updated
if the patch was still present.
Enabling the check lead to a problem Chuck reported. I'm reporting
that disabling it also leads to a problem.
My proposal to turn off WCC was in attempt to solve the problem by
having something that also solves Chuck problem.
On Thu, Mar 31, 2016 at 11:27 AM, Olga Kornievskaia <[email protected]> wrote:
> On Thu, Mar 31, 2016 at 11:16 AM, Trond Myklebust
> <[email protected]> wrote:
>> On Thu, Mar 31, 2016 at 10:36 AM, Olga Kornievskaia <[email protected]> wrote:
>>> On Thu, Mar 31, 2016 at 10:21 AM, Trond Myklebust
>>> <[email protected]> wrote:
>>>> On Thu, Mar 31, 2016 at 10:15 AM, Olga Kornievskaia <[email protected]> wrote:
>>>>> On Wed, Mar 30, 2016 at 7:32 PM, Trond Myklebust
>>>>> <[email protected]> wrote:
>>>>>> On Wed, Mar 30, 2016 at 5:51 PM, Olga Kornievskaia <[email protected]> wrote:
>>>>>>> On Wed, Mar 30, 2016 at 5:45 PM, Trond Myklebust
>>>>>>> <[email protected]> wrote:
>>>>>>>> On Wed, Mar 30, 2016 at 5:02 PM, Olga Kornievskaia <[email protected]> wrote:
>>>>>>>>> On Tue, Mar 29, 2016 at 3:47 PM, Olga Kornievskaia <[email protected]> wrote:
>>>>>>>>>> I think that patch introduces a problem. Since the checking for the
>>>>>>>>>> change in ctime was removed by the commit it leads to (improper) cache
>>>>>>>>>> invalidation in NFSv3.
>>>>>>>>>>
>>>>>>>>>> Test is write 10240bytes to the server then read it. Expectation is
>>>>>>>>>> not to see read on the wire. In the test the write is spread over
>>>>>>>>>> 3rpcs.
>>>>>>>>>>
>>>>>>>>>> On the 1nd reply
>>>>>>>>>> fattr->gencount=33 nfsi->gencount=32 generation_counter=35
>>>>>>>>>> On the 2nd reply
>>>>>>>>>> fattr->gencount=34 nfsi->gencount=36 generation_counter=36
>>>>>>>>>>
>>>>>>>>>> In the code when processing 2nd reply,
>>>>>>>>>> nfs_post_op_update_inode_force_wcc_locked() calls into
>>>>>>>>>> nfs_inode_attrs_need_update() it determines that it doesn't need to
>>>>>>>>>> update them (even though the size and the time have changed). so it
>>>>>>>>>> doesn't call nfs_wcc_update_inode() so the inode->i_version doesn't
>>>>>>>>>> get set to the ctime that was received in the 2nd reply.
>>>>>>>>>>
>>>>>>>>>> On the 3rd reply
>>>>>>>>>> fattr->gencount=37 nfsi->gencount=36 generation_counter=37
>>>>>>>>>>
>>>>>>>>>> It leads to nfs_inode_attrs_need_update() returns 1 and in the
>>>>>>>>>> nfs_update_inode() the difference in the ctimes leads to invalidation.
>>>>>>>>>> fattr->gencount was update from nfs_writeback_update_node() ->
>>>>>>>>>> nfs_post_op_update_inode_force_wcc() calling nfs_fattr_set_barrier().
>>>>>>>>>>
>>>>>>>>>> I'm not sure what appropriate values for "gencount" should have been.
>>>>>>>>>> But if the check for nfs_ctime_need_update() was still there in
>>>>>>>>>> nfs_inode_attrs_need_update() then the 2nd reply would have
>>>>>>>>>> appropriately updated the i_version and not lead to invalidation.
>>>>>>>>>
>>>>>>>>> Would like to add that this problem is not seen against the Linux
>>>>>>>>> server because it doesn't send "before" attributes. So code doesn't
>>>>>>>>> set the "pre_change_attr" which later doesn't make what's stored in
>>>>>>>>> inode->i_version.
>>>>>>>>>
>>>>>>>>> The problem also not seen for v4 because pre_change_attr is not gotten
>>>>>>>>> from the "before" attributes but instead from the previous value in
>>>>>>>>> inode->i_version which is then compared to the itself.
>>>>>>>>>
>>>>>>>>> If reverting the problematic commit is not the solution, then how
>>>>>>>>> about ignoring the "before" ctime attributes sent by the server. This
>>>>>>>>> also helps with the out-of-order RPCs.
>>>>>>>>
>>>>>>>> Why bother doing that on the client? These attributes aren't mandatory
>>>>>>>> to send...
>>>>>>>>
>>>>>>>
>>>>>>> Leads to poor client performances. Every large enough read invalidates
>>>>>>> the cache so all the reads go to the server always.
>>>>>>
>>>>>> I'm saying why not just turn off the WCC functionality on the server then.
>>>>>
>>>>> One reasoning could be that providing cache consistency is client's
>>>>> responsibility. Server only provides needed information.
>>>>
>>>> Sure, but the server is the single point of control for all clients.
>>>
>>> What about other client implementations that might use before attributes?
>>>
>>>>> While I can see that handling out-of-order RPCs might not be worth it
>>>>> because hopefully it doesn't happen often but handling in order RPCs
>>>>> and always invalidating the cache is a bug.
>>>>
>>>> We don't invalidate on in-order RPCs.
>>>
>>> Yes we do and that was the point of my initial post. The commit
>>> introduced a regression.
>>
>> No we don't. If the RPC replies were received in the order in which
>> they were processed on the server, then the WCC information would
>> match what is currently in the client cache. Your patch turns off WCC
>> processing on the client in order to avoid that ordering problem by
>> having the client fill in WCC info that matches what is in its cache.
>
> The RPCs are returned in order.
>
> The problem is when the 2nd reply is gotten the attributes are not
> updated. When the 3rd reply is processed it finds the attributes no
> longer match.
>
> The attributes should have been updated. They would have been updated
> if the patch was still present.
>
> Enabling the check lead to a problem Chuck reported. I'm reporting
> that disabling it also leads to a problem.
>
> My proposal to turn off WCC was in attempt to solve the problem by
> having something that also solves Chuck problem.
Here's an annotated debugging info showing that attributes are not
being updated due to barriers:
Please look for (***) but it shows that
gencounts are initialized for each of the 3 outgoing writes.
when 1st reply is processed the fattr->gencount is less than inode's
so the attributes are then updated.
then the nfs_update_inode() bumps the inode's gencount to the next value. WHY??
because the counter is bumped now when the 2nd reply is gotten the
fattr->gencount is now less and attributes are not update.
Now inode has outdated attributes!
Then when 3rd reply is processed it finds mismatching attributes and
invalidates the cache.
Apr 1 15:14:42 compute kernel: AGLO: nfs_fattr_init initializing
fattr=ffff88000a320f70 gencount=33
Apr 1 15:14:42 compute kernel: NFS: initiated pgio call (req
0:39/789905590, 4096 bytes @ offset 0)
Apr 1 15:14:42 compute kernel: AGLO: nfs_fattr_init initializing
fattr=ffff88000a3212f0 gencount=34
Apr 1 15:14:42 compute kernel: NFS: initiated pgio call (req
0:39/789905590, 4096 bytes @ offset 4096)
Apr 1 15:14:42 compute kernel: AGLO: nfs_fattr_init initializing
fattr=ffff88000a321670 gencount=35
Apr 1 15:14:42 compute kernel: NFS: initiated pgio call (req
0:39/789905590, 2048 bytes @ offset 8192)
Apr 1 15:14:42 compute kernel: AGLO: decode_wcc_attr setting
NFS_ATTR_FATTR_PRECHANGE for attr=ffff88000a320f70
Apr 1 15:14:42 compute kernel: AGLO: decode_wcc_attr setting
pre_change_attr 1567151659683131632 for attr=ffff88000a320f70
Apr 1 15:14:42 compute kernel: NFS: nfs_pgio_result: 44, (status 4096)
**** Apr 1 15:14:42 compute kernel: AGLO:
[nfs_post_op_update_inode_force_wcc_locked+0x37/0x120 [nfs]]
nfs_inode_attrs_need_update result=1 fattr=ffff88000a320f70
fattr->gencount=33 nfsi->gencount=32 generation_count=35
Apr 1 15:14:42 compute kernel: AGLO:
[nfs_refresh_inode_locked+0x48/0x2b0 [nfs]]
nfs_inode_attrs_need_update result=1 fattr=ffff88000a320f70
fattr->gencount=33 nfsi->gencount=32 generation_count=35
Apr 1 15:14:42 compute kernel: NFS: nfs_update_inode(0:39/789905590
fh_crc=0x1699a74d ct=1 info=0x7febf)
Apr 1 15:14:42 compute kernel: AGLO: nfs_wcc_update_inode
i_version=1567151659683131632 pre_change_attr=1567151659683131632
prechange=262144 change=131072 fattr=ffff88000a320f70
Apr 1 15:14:42 compute kernel: AGLO: nfs_wcc_update_inode updating
ctime to 1567151659694027632
Apr 1 15:14:42 compute kernel: AGLO: nfs_update_inode inode
version=1567151659694027632 and attr=1567151659694027632
**** Apr 1 15:14:42 compute kernel: AGLO: nfs_update_inode updating
inode gencount = 36
Apr 1 15:14:42 compute kernel: AGLO: nfs3_write_done
version=1567151659694027632 inode attr = 10240 received attr 4096
Apr 1 15:14:42 compute kernel: AGLO: decode_wcc_attr setting
NFS_ATTR_FATTR_PRECHANGE for attr=ffff88000a3212f0
Apr 1 15:14:42 compute kernel: AGLO: decode_wcc_attr setting
pre_change_attr 1567151659694027632 for attr=ffff88000a3212f0
Apr 1 15:14:42 compute kernel: NFS: nfs_pgio_result: 45, (status 4096)
**** Apr 1 15:14:42 compute kernel: AGLO:
[nfs_post_op_update_inode_force_wcc_locked+0x37/0x120 [nfs]]
nfs_inode_attrs_need_update result=0 fattr=ffff88000a3212f0
fattr->gencount=34 nfsi->gencount=36 generation_count=36
Apr 1 15:14:42 compute kernel: AGLO:
[nfs_refresh_inode_locked+0x48/0x2b0 [nfs]]
nfs_inode_attrs_need_update result=0 fattr=ffff88000a3212f0
fattr->gencount=34 nfsi->gencount=36 generation_count=36