> On Fri, Jun 10, 2022 at 5:44 AM Petr Vorel <[email protected]> wrote:
> > Signed-off-by: Petr Vorel <[email protected]>
> > ---
> > Hi NFS developers,
> > your comments are welcome. This is an effort how to support NFS tests on
> > all filesystems available on SUT. Using $TST_MNTPOINT means test run in
> > loop, each time different filesystem is used. It's implemented via
> > formatted loop device (the same way as in LTP C API).
> > Code is also at:
> > https://github.com/pevik/ltp/tree/shell/all_filesystems.v2
> > But this requires restarting NFS server (otherwise legacy
> > testcases/lib/daemonlib.sh
> > would have to be used), which is IMHO not optimal.
> > Without that (or only run 'systemctl reload nfs-server' or exportfs -r
> > on remote side) it cannot be umounted after testing - debugging with
> > fuser, code at:
> > https://github.com/pevik/ltp/commit/3656d035d43445a107154ef397ef1db2fad2c4f0
> > The problem is that loop device is still referenced by nfs server and
> > thus cannot be unmounted. Can this be somehow fixed? Is it even wanted
> > to have tests on loop device (the only reasonable way to support more
> > filesystems)? Also tests will run much longer (we could filter out some
> > filesystems not supported, if there are any).
> > # LTP_SINGLE_FS_TYPE=ext2 PATH="/opt/ltp/testcases/bin:$PATH" nfs07.sh -v
> > 3 -t tcp -i3
> > ## NOTE: testing itself is OK
> > nfs07 1 TINFO: initialize 'lhost' 'ltp_ns_veth2' interface
> > nfs07 1 TINFO: add local addr 10.0.0.2/24
> > nfs07 1 TINFO: add local addr fd00:1:1:1::2/64
> > nfs07 1 TINFO: initialize 'rhost' 'ltp_ns_veth1' interface
> > nfs07 1 TINFO: add remote addr 10.0.0.1/24
> > nfs07 1 TINFO: add remote addr fd00:1:1:1::1/64
> > nfs07 1 TINFO: Network config (local -- remote):
> > nfs07 1 TINFO: ltp_ns_veth2 -- ltp_ns_veth1
> > nfs07 1 TINFO: 10.0.0.2/24 -- 10.0.0.1/24
> > nfs07 1 TINFO: fd00:1:1:1::2/64 -- fd00:1:1:1::1/64
> > tst_device.c:89: TINFO: Found free device 0 '/dev/loop0'
> > tst_supported_fs_types.c:148: TINFO: WARNING: testing only ext2
> > tst_supported_fs_types.c:89: TINFO: Kernel supports ext2
> > tst_supported_fs_types.c:51: TINFO: mkfs.ext2 does exist
> > nfs07 1 TINFO: Testing on ext2
> > nfs07 1 TINFO: Formatting ext2 with opts='/dev/loop0'
> > nfs07 1 TINFO: timeout per run is 0h 5m 0s
> > nfs07 1 TINFO: mount.nfs: (linux nfs-utils 2.6.1)
> > nfs07 1 TINFO: setup NFSv3, socket type tcp
> > nfs07 1 TINFO: Mounting NFS: mount -v -t nfs -o proto=tcp,vers=3 10.0.0.2:/tmp/LTP_nfs07.A3PIB82iUv/mntpoint/3/tcp
> > /tmp/LTP_nfs07.A3PIB82iUv/mntpoint/3/0
> > nfs07 1 TPASS: All files and directories were correctly listed
> > nfs07 2 TPASS: All files and directories were correctly listed
> > nfs07 3 TPASS: All files and directories were correctly listed
> > nfs07 4 TINFO: Cleaning up testcase
> > ## DEBUGGING CODE in nfs_cleanup()
> > nfs07 4 TINFO: fuser -mv /tmp/LTP_nfs07.P1XS9smc5w ($TST_TMPDIR)
> > USER PID ACCESS COMMAND
> > /tmp/LTP_nfs07.P1XS9smc5w:
> > root kernel mount /tmp
> > root 2125 ..c.. tst_timeout_kil
> > nfs07 4 TINFO: fuser -mv /tmp/LTP_nfs07.P1XS9smc5w/mntpoint ($TST_MNTPOINT)
> > USER PID ACCESS COMMAND
> > /tmp/LTP_nfs07.P1XS9smc5w/mntpoint:
> > root kernel mount
> > /tmp/LTP_nfs07.P1XS9smc5w/mntpoint
> > nfs07 4 TINFO: fuser -mv /tmp/LTP_nfs07.P1XS9smc5w/mntpoint/3/0
> > USER PID ACCESS COMMAND
> > /tmp/LTP_nfs07.P1XS9smc5w/mntpoint/3/0:
> > root kernel mount
> > /tmp/LTP_nfs07.P1XS9smc5w/mntpoint/3/0
> > ## from nfs_cleanup()
> > ## grep -q "$local_dir" /proc/mounts && umount $local_dir
> > nfs07 4 TINFO: umount /tmp/LTP_nfs07.P1XS9smc5w/mntpoint/3/0
> > umount: /tmp/LTP_nfs07.P1XS9smc5w/mntpoint: target is busy.
> Maybe try with `umount -fl`?
Thank you! Unfortunately it does not work (I tried this before ending up with
restarting server because even -fl did not help).
I also consider the need of 'umount -fl' as kind of error just less aggressive
then restarting server. But if this is considered ok, why not.
Kind regards,
Petr
> unmount manual says:
> -f, --force force unmount (in case of an unreachable NFS system)
> -l, --lazy detach the filesystem now, clean up things later