Dear All
I desire to issue some AT commands to my bluetooth phone as follows
# rfcomm bind rfcomm0 00:0a:d9:xx:xx:xx 15
After this I set the permission of the device rfcomm0 to being able to read, write and execute by all users.
I have the uucp package installed. Next I issued
#cu -l rfcomm0 -s 9600
The terminal reflected "Connected" soon after.
However, beyond this point I have tried to issue AT commands to my phone without success.
I understand that to use cu, I have to use % before issuing the commands.
Please do enlighten me on how I may use AT commands via cu.
Thank You
Teck Ping
Hi Teck,
> I desire to issue some AT commands to my bluetooth phone as follows
>
> # rfcomm bind rfcomm0 00:0a:d9:xx:xx:xx 15
> After this I set the permission of the device rfcomm0 to being able to
> read, write and execute by all users.
>
> I have the uucp package installed. Next I issued
>
> #cu -l rfcomm0 -s 9600
> The terminal reflected "Connected" soon after.
>
> However, beyond this point I have tried to issue AT commands to my
> phone without success.
>
> I understand that to use cu, I have to use % before issuing the
> commands.
>
> Please do enlighten me on how I may use AT commands via cu.
this is not the cu mailing list ;) Check its manual page.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel