After installing *-3.30, when calling DiscoverDevices, with path "/hci0", RemoteDeviceFound and RemoteNameUpdated are STILL returned against path "/org/bluez/hci0", and not the originating path, "/hci0".
DS
----- Original Message -----
From: David Stockwell
To: BlueZ development
Sent: Friday, March 28, 2008 6:31 PM
Subject: Experimental Mode: org.bluez.Adapter Methods/Signals
I ask because when I tried calling DiscoverDevices, it would fail when I called with path "/org/bluez/hci0", but would run when I called it with path "/hci0". But, the funny thing is that because the RemoteDeviceFound signal is registered to both the old path and the new path, the signals come back on "/org/bluez/hci0".
Hi David,
> After installing *-3.30, when calling DiscoverDevices, with path "/
> hci0", RemoteDeviceFound and RemoteNameUpdated are STILL returned
> against path "/org/bluez/hci0", and not the originating path, "/hci0".
that is fine. On /hci0 you should see DeviceFound signals.
Regards
Marcel
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Register now and save $200. Hurry, offer ends at 11:59 p.m.,
Monday, April 7! Use priority code J8TLD2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel