Hi Marcel,
Thanks for you answer....
1) The sdpd is working... I test it.
# ps -ae | grep sdpd
1614 ? 00:03:15 sdpd
However I Load it and try and the same result...
2) I disable the hcid.conf (auth and encrypt) and the result is the=20
same...
I use Fedora Core 4....
Any idea?
(I think is the configuration of the SDP. But What?
All works well except when i try to connect with the SDP to obtain the=20
services.. =C2=BF=C2=BF=C2=BF??)
Best Regards,
Sir Graham.
----- Original Message -----=20
From: "Marcel Holtmann" <[email protected]>
To: <[email protected]>
Sent: Thursday, February 23, 2006 11:37 AM
Subject: Re: [Bluez-devel] Problem with SDP.
Hi,
> Thanks for you answer. I try with the HCIDUMP. This is te results:
>
> hcidump -X -V
> HCI sniffer - Bluetooth packet analyzer ver 1.18
> device: hci0 snap_len: 1028 filter: 0xffffffff
> > HCI Event: Connect Request (0x04) plen 10
> bdaddr 00:0E:6D:AE:41:04 class 0x500204 type ACL
> < HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> bdaddr 00:0E:6D:AE:41:04 role 0x00
> Role: Master
> > HCI Event: Command Status (0x0f) plen 4
> Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> > HCI Event: Link Key Request (0x17) plen 6
> bdaddr 00:0E:6D:AE:41:04
> > HCI Event: Role Change (0x12) plen 8
> status 0x00 bdaddr 00:0E:6D:AE:41:04 role 0x00
> Role: Master
> < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
> bdaddr 00:0E:6D:AE:41:04
> Link key: c277ad30bcb93d63f6aad6527b964fd0
> > HCI Event: Command Complete (0x0e) plen 10
> Link Key Request Reply (0x01|0x000b) ncmd 1
> status 0x00 bdaddr 00:0E:6D:AE:41:04
> > HCI Event: Connect Complete (0x03) plen 11
> status 0x00 handle 42 bdaddr 00:0E:6D:AE:41:04 type ACL encrypt 0x0=
1
> < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> handle 42 policy 0x0f
> Link policy: RSWITCH HOLD SNIFF PARK
> > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
> 0000: 04 41 ae 6d 0e 00 01 .A.m...
> > HCI Event: Command Complete (0x0e) plen 6
> Write Link Policy Settings (0x02|0x000d) ncmd 1
> status 0x00 handle 42
> < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
> handle 42 ptype 0x0018
> Packet type: DM1 DH1
> 0000: 2a 00 18 00 *...
> > HCI Event: Command Status (0x0f) plen 4
> Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
> > HCI Event: Connection Packet Type Changed (0x1d) plen 5
> status 0x00 handle 42 ptype 0x331e
> Packet type: DM1 DH1 2-DH1 2-DH3 2-DH5 3-DH1 3-DH3 3-DH5
> > HCI Event: Max Slots Change (0x1b) plen 3
> 0000: 2a 00 05 *..
> > ACL data: handle 42 flags 0x02 dlen 12
> L2CAP(s): Connect req: psm 1 scid 0x00b9
> < ACL data: handle 42 flags 0x02 dlen 16
> L2CAP(s): Connect rsp: dcid 0x0040 scid 0x00b9 result 0 status 0
> Connection successful
> > HCI Event: QoS Setup Complete (0x0d) plen 21
> status 0x00 handle 42
> 0000: 00 01 00 00 00 00 00 00 00 00 88 13 00 00 ff ff=20
> ................
> 0010: ff ff ..
> > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 42
> > ACL data: handle 42 flags 0x02 dlen 12
> L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> < ACL data: handle 42 flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x00b9 flags 0x00 result 0 clen 0
> Success
> < ACL data: handle 42 flags 0x02 dlen 12
> L2CAP(s): Config req: dcid 0x00b9 flags 0x00 clen 0
> > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 42
> > HCI Event: Number of Completed Packets (0x13) plen 5
> handle 42
> > ACL data: handle 42 flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
> Success
> > ACL data: handle 42 flags 0x02 dlen 17
> L2CAP(d): cid 0x0040 len 13 [psm 1]
> SDP SS Req: tid 0x1 len 0x8
> pat uuid-16 0x0100 (L2CAP)
> max 65535
> cont 00
> > HCI Event: Mode Change (0x14) plen 6
> status 0x00 handle 42 mode 0x02 interval 800
> Mode: Sniff
>
> In this point the application of Symbian are blocket.... (BTDiscovery).
> BTDiscovery is one application that returns all services and attributes=
of
> the SDP of one service (like the sdptool browse).
>
> I try also with my application in symbian (It not blocket because I hav=
e
> watchdog to control it) with the same result.
>
> I try also from other linux and the sdptool can=C2=B4t conect. And Wind=
ows 32
> can=C2=B4t return any service...
>
> I think the problem is the configuration of the SDP in linux...
first of all disable security mode 3 (options auth and encrypt in
hcid.conf). After that check that sdpd is still running, because it
seems that it dies or has any other problems. And of course use the
latest versions.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting langua=
ge
that extends applications into web and mobile media. Attend the live webc=
ast
and join the prime developer group breaking into this new coding territor=
y!
http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=110944&bid$1720&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel=20
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Hi,
> Thanks for you answer....
>
> 1) The sdpd is working... I test it.
>
> # ps -ae | grep sdpd
> 1614 ? 00:03:15 sdpd
>
> However I Load it and try and the same result...
>
>
>
> 2) I disable the hcid.conf (auth and encrypt) and the result is the
> same...
>
> I use Fedora Core 4....
install the latest bluez-libs and bluez-utils from the BlueZ website.
The Fedora Core 4 packages are quite old.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel