Hi all
I am trying to use serial bluetooth adaptor on linux RHEL 4.0 kernel 2.6.9.
with bluez support as
bluez-bluefw-1.0-6
bluez-libs-devel-2.10-2
bluez-libs-2.10-2
bluez-utils-2.10-2.1
I even try to build latest kernel 2.6.19 with all these support. But i am
not able to use my adaptor.
The Adaptor I am using is IOGEAR(GBS301) Bluetooth to Serial Adaptor.
I have used
setserial /dev/ttyS0 baud_base 115200 auto_irq
setserial -abGv /dev/ttyS0
hciattach -s 115200 /dev/ttyS0 any 115200
but after doing hciconfig i get
hci0: Type: UART
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:12 acl:0 sco:0 commands:3 errors:0
if I try
#hciattach -s 115200 /dev/ttyS0 bcsp 115200
it gives me BCSP initialization timeout
if I try with
#hciconfig hci0 up
it gives me
Can't init device hci0: Connection timed out (110)
my lsmod is
Module Size Used by
hidp 28160 2
rfcomm 37528 0
l2cap 23168 10 hidp,rfcomm
hci_uart 16120 1
bluetooth 50020 6 hidp,rfcomm,l2cap,hci_uart
ipv6 226720 18
autofs4 20996 0
sunrpc 149948 1
dm_mod 56216 0
button 7056 0
battery 10500 0
asus_acpi 16408 0
ac 5636 0
ehci_hcd 30216 0
i2c_viapro 8980 0
i2c_core 21248 1 i2c_viapro
snd_via82xx 26900 0
snd_ac97_codec 88096 1 snd_via82xx
snd_ac97_bus 2816 1 snd_ac97_codec
snd_pcm_oss 41760 0
snd_mixer_oss 16256 1 snd_pcm_oss
snd_pcm 75140 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_timer 22788 1 snd_pcm
snd_page_alloc 10120 2 snd_via82xx,snd_pcm
snd_mpu401_uart 8832 1 snd_via82xx
snd_rawmidi 23456 1 snd_mpu401_uart
snd_seq_device 8076 1 snd_rawmidi
snd 50148 9
snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,s
nd_seq_device
soundcore 8160 1 snd
via_rhine 24328 0
mii 5760 1 via_rhine
ext3 124552 2
jbd 56104 1 ext3
sd_mod 20480 0
scsi_mod 132524 1 sd_mod
Can some one help me I am in deep trouble
--
Impossible
itself contain
I M Possible
Vikas