Was away for a few days, thanks for the replies which unfortunately seem
to suggest this is not a mere configuration issue I can fix from my side.
I've tried Linux 2.6.11.7 next and refetched btsco from cvs today: One
thing that seems to have changed is that I now get the confirmation
tone from the headset whenever aplay or arecord are started -
unfortunately I can still neither hear or record any audio with it
(even though that works fine using the Widcomm stack)...
hciconfig -a
hci0: Type: USB
BD Address: 00:02:72:80:A5:D3 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:13064 acl:364 sco:0 events:722 errors:0
TX bytes:8126 acl:339 sco:0 commands:182 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'localhost-0'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x33c LMP Ver: 1.1 (0x1) LMP Subver:
0x33c
Manufacturer: Cambridge Silicon Radio (10)
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
root@sigma:~# btsco -v 00:07:A4:95:41:76
btsco v0.4
Device is 1:0
Voice setting: 0x0060
RFCOMM channel 1 connected
recieved AT+CKPD=200
speaker volume: 3 mic volume: 15
driver is in use
connected SCO channel
Done setting sco fd
recieved AT+VGS=15
Sending up speaker change 15
recieved AT+VGS=03
Sending up speaker change 3
recieved AT+VGS=07
Sending up speaker change 7
recieved AT+VGS=11
Sending up speaker change 11
speaker volume: 11 mic volume: 15
driver is not in use
disconnected SCO channel
speaker volume: 11 mic volume: 15
driver is in use
connected SCO channel
Done setting sco fd
recieved AT+VGS=11
Sending up speaker change 11
speaker volume: 11 mic volume: 15
driver is not in use
disconnected SCO channel
RFCOMM channel lost
snd-bt-sco revision 1.6 $
snd-bt-sco: snd-bt-scod thread starting
snd-bt-sco: playback_open
Bluetooth: SCO (Voice Link) ver 0.4
Bluetooth: SCO socket layer initialized
snd-bt-sco: prepare ok bps: 16000 size: 8000 count: 2000
snd-bt-sco: playback_trigger 1
snd-bt-sco: setting playback to bspcm
snd-bt-sco: playback_trigger 0
snd-bt-sco: setting playback to NULL
snd-bt-sco: Disposing of previous socket count 2
snd-bt-sco: capture_open
snd-bt-sco: capture_prepare
snd-bt-sco: prepare ok bps: 16000 size: 8000 count: 2000
snd-bt-sco: capture_trigger 1
snd-bt-sco: setting capture to bspcm
snd-bt-sco: capture_trigger 0
snd-bt-sco: setting capture to NULL
snd-bt-sco: Disposing of previous socket count 2
--
HCI sniffer - Bluetooth packet analyzer ver 1.19
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:07:A4:95:41:76 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 05 04 ....
> HCI Event: Link Key Request (0x17) plen 6
0000: 76 41 95 a4 07 00 vA....
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
bdaddr 00:07:A4:95:41:76
Link key: 39b150b8640b812d72b82f572be54b85
> HCI Event: Command Complete (0x0e) plen 10
0000: 01 0b 04 00 76 41 95 a4 07 00 ....vA....
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 2b 00 76 41 95 a4 07 00 01 01 .+.vA......
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 43 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Command Complete (0x0e) plen 6
0000: 01 0d 08 00 2b 00 ....+.
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
0000: 76 41 95 a4 07 00 01 vA.....
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x006a scid 0x0040 result 1 status 2
Connection pending - Authorization pending
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x006a scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x006a flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 48
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x006a flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 24
L2CAP(d): cid 0x006a len 20 [psm 1]
SDP SSA Req: tid 0x0 len 0xf
pat uuid-16 0x1108 (Headset)
max 65535
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 27
> ACL data: handle 43 flags 0x01 dlen 25
L2CAP(d): cid 0x0040 len 48 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x2b
count 38
cont 02 00 22
< ACL data: handle 43 flags 0x02 dlen 26
L2CAP(d): cid 0x006a len 22 [psm 1]
SDP SSA Req: tid 0x1 len 0x11
pat uuid-16 0x1108 (Headset)
max 65535
aid(s) 0x0000 - 0xffff
cont 02 00 22
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 27
> ACL data: handle 43 flags 0x01 dlen 19
L2CAP(d): cid 0x0040 len 42 [psm 1]
SDP SSA Rsp: tid 0x1 len 0x25
count 34
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10000
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1108 (Headset) uuid-16 0x1203 (Audio) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1108 (Headset) uint 0x100 > >
aid 0x0100 (SrvName)
str "Headset"
aid 0x0302 (unknown)
bool 0x1
cont 00
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x006a scid 0x0040
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Command Complete (0x0e) plen 6
0000: 01 25 0c 00 60 00 .%..`.
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0041
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x006a scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x006b scid 0x0041 result 1 status 2
Connection pending - Authorization pending
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x006b scid 0x0041 result 0 status 0
Connection successful
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x006b flags 0x00 clen 4
MTU 1024
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
MTU 1024
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x006b flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x006b len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 43 flags 0x02 dlen 18
L2CAP(d): cid 0x006b len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 1019 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 18
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 127 max_retrans 0 credits 0
< ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x006b len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(d): cid 0x006b len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(d): cid 0x006b len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
< ACL data: handle 43 flags 0x02 dlen 9
L2CAP(d): cid 0x006b len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 33
> ACL data: handle 43 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 15
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 20
L2CAP(d): cid 0x0041 len 16 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 12 fcs 0x40
0000: 41 54 2b 43 4b 50 44 3d 32 30 30 0d AT+CKPD=200.
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x006b len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
< ACL data: handle 43 flags 0x02 dlen 17
L2CAP(d): cid 0x006b len 13 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 9 fcs 0x9a
0000: 41 54 2b 56 47 53 3d 33 0d AT+VGS=3.
< ACL data: handle 43 flags 0x02 dlen 18
L2CAP(d): cid 0x006b len 14 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 10 fcs 0x9a
0000: 41 54 2b 56 47 4d 3d 31 35 0d AT+VGM=15.
< HCI Command: Add SCO Connection (0x01|0x0007) plen 4
handle 43 ptype 0x00e0
Packet type: HV1 HV2 HV3
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 07 04 ....
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 2e 00 76 41 95 a4 07 00 00 01 ...vA......
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 3
0000: 41 54 2b 56 47 53 3d 31 35 0d AT+VGS=15.
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x006b len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 1
0000: 41 54 2b 56 47 53 3d 30 33 0d AT+VGS=03.
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x006b len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 1
0000: 41 54 2b 56 47 53 3d 30 37 0d AT+VGS=07.
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x006b len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 1
0000: 41 54 2b 56 47 53 3d 31 31 0d AT+VGS=11.
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x006b len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Mode Change (0x14) plen 6
0000: 00 2b 00 02 00 08 .+....
< ACL data: handle 43 flags 0x02 dlen 18
L2CAP(d): cid 0x006b len 14 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 10 fcs 0x9a
0000: 41 54 2b 56 47 53 3d 31 31 0d AT+VGS=11.
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 46 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 06 04 ....
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Disconn Complete (0x05) plen 4
0000: 00 2e 00 16 ....
< HCI Command: Add SCO Connection (0x01|0x0007) plen 4
handle 43 ptype 0x00e0
Packet type: HV1 HV2 HV3
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 07 04 ....
> HCI Event: Connect Complete (0x03) plen 11
0000: 00 29 00 76 41 95 a4 07 00 00 01 .).vA......
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 2
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 10 fcs 0x5c credits 2
0000: 41 54 2b 56 47 53 3d 31 31 0d AT+VGS=11.
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x006b len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
0000: 0d 0a 4f 4b 0d 0a ..OK..
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 41 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 06 04 ....
> HCI Event: Disconn Complete (0x05) plen 4
0000: 00 29 00 16 .)..
> HCI Event: Mode Change (0x14) plen 6
0000: 00 2b 00 00 00 00 .+....
> ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): DISC: cr 0 dlci 2 pf 1 ilen 0 fcs 0xd9
< ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x006b len 4 [psm 3]
RFCOMM(s): UA: cr 0 dlci 2 pf 1 ilen 0 fcs 0xf3
< ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x006b len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x006b scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> HCI Event: Number of Completed Packets (0x13) plen 5
0000: 01 2b 00 01 00 .+...
> ACL data: handle 43 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x006b scid 0x0041
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 43 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 06 04 ....
> HCI Event: Disconn Complete (0x05) plen 4
0000: 00 2b 00 16 .+..
--
Original mail to bluez-users follows:
> Oops, forgot that info here:
>
> root@sigma:~# hcitool info 00:07:A4:95:41:76
> Requesting information ...
> BD Address: 00:07:A4:95:41:76
> Device Name: Jabra BT110
> LMP Version: 1.2 (0x2) LMP Subversion: 0x613
> Manufacturer: Cambridge Silicon Radio (10)
> Features: 0xfc 0xff 0x0b 0x00 0x00 0x00 0x00 0x00
> <encryption> <slot offset> <timing accuracy> <role
> switch>
> <hold mode> <sniff mode> <park state> <RSSI> <channel
> quality>
> <SCO link> <HV2 packets> <HV3 packets> <u-law log>
> <A-law log>
> <CVSD> <paging scheme> <transparent SCO>
>
> On Mon, Apr 04, 2005 at 09:45:42PM +0200, Lars Steinke wrote:
> > Hi there,
> >
> > while running btsco I can successfully change my mixersettings via
> > the headset, so I assume the connection has been established just fine:
> >
> > root@sigma:~/src/btsco# ./btsco -v 00:07:A4:95:41:76 2
> > btsco v0.4
> > Device is 1:0
> > Voice setting: 0x0060
> > RFCOMM channel 2 connected
> > recieved AT+BRSF=24
> > recieved AT+VGS=03
> > Sending up speaker change 3
> > recieved AT+VGS=07
> > Sending up speaker change 7
> > recieved AT+VGS=11
> > Sending up speaker change 11
> > recieved AT+VGS=15
> > Sending up speaker change 15
> > speaker volume: 15 mic volume: 1
> > driver is in use
> > connected SCO channel
> > Done setting sco fd
> >
> > But I can neither hear sound nor record anything via the Jabra BT110
> > headset using BlueZ 20050328 with kernel 2.6.11:
> >
> > aplay -D plughw:Headset test.wav
> > Playing Sparc Audio 'test.wav' : Mu-Law, Rate 8000 Hz, Mono
> >
> > I just hear a raise in static when playback commences (even though mixer
> > levels are maxed in alsamixer!)...
> >
> > snd-bt-sco revision 1.6 $
> > snd-bt-sco: snd-bt-scod thread starting
> > snd-bt-sco: playback_open
> > snd-bt-sco: prepare ok bps: 16000 size: 8000 count: 2000
> > snd-bt-sco: playback_trigger 1
> > snd-bt-sco: setting playback to bspcm
> >
> > root@sigma:~# hcitool con
> > Connections:
> > < SCO 00:07:A4:95:41:76 handle 44 state 1 lm SLAVE
> > < ACL 00:07:A4:95:41:76 handle 41 state 1 lm MASTER
> > root@sigma:~# hciconfig hci0
> > hci0: Type: USB
> > BD Address: 00:02:72:80:A5:D3 ACL MTU: 192:8 SCO MTU: 64:8
> > UP RUNNING PSCAN ISCAN
> > RX bytes:9966 acl:207 sco:0 events:535 errors:0
> > TX bytes:6279 acl:191 sco:0 commands:195 errors:0
> >
> > root@sigma:~# hciconfig hci0 revision
> > hci0: Type: USB
> > BD Address: 00:02:72:80:A5:D3 ACL MTU: 192:8 SCO MTU: 64:8
> > HCI 16.14
> > Chip version: BlueCore02-External
> > Max key size: 56 bit
> > SCO mapping: HCI
> >
> > Audio works fine with that headset and dongle using the Widcomm stack
> > 1.4 under Windoze ;(...
> >
> > Regards,
> > Lars
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
ok, clearly i'll have to document this.
i've noticed that if the usb bluetooth adapter is connected directly to
the machine it gets ohci. if it's connected to a 2.0 hub going to the
machine it gets ehci.
btw, it dilutes the value of having two lists when you crosspost. -devel
is where btsco discussion fits best.
Lars Steinke wrote:
> Phew, got it finally,
>
> it was the bloody ehci_hcd audio problem others have come across:
> http://sourceforge.net/mailarchive/message.php?msg_id=11431438
>
> Using ohci_hcd, btsco works a treat in recording and playing, thanks for
> the good work !!!
>
> PS: Should others have trouble using the BT110, keep in mind it has very
> stringent power saving and thus will turn off very soon after the last
> audio packets have been transmitted (the confimation tone will notify you
> of that) - btsco will then quit with "RFCOMM channel lost"...
>
> Regards,
> Lars
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Phew, got it finally,
it was the bloody ehci_hcd audio problem others have come across:
http://sourceforge.net/mailarchive/message.php?msg_id=11431438
Using ohci_hcd, btsco works a treat in recording and playing, thanks for
the good work !!!
PS: Should others have trouble using the BT110, keep in mind it has very
stringent power saving and thus will turn off very soon after the last
audio packets have been transmitted (the confimation tone will notify you
of that) - btsco will then quit with "RFCOMM channel lost"...
Regards,
Lars
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel