Guys I think mine is a lil peculiar problem,,,, hope to get a solution for
here,.....
Initially when I was running the knoppix live CD.... my "hcicongig -a". had
all the service classes including Networking,Rendering,Capturing and
Audio... I was delighted... but now it shows in this way!!
(and I didn't even change hcid.conf)
root@bluetooth:~# hciconfig -a
hci0: Type: USB
BD Address: 00:09:DD:10:00:CC ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:63 acl:0 sco:0 events:7 errors:0
TX bytes:27 acl:0 sco:0 commands:7 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT
Name: 'Soumya-0'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver:
0x175
Manufacturer: Cambridge Silicon Radio (10)
How come are my Service classes "unspecified" ??
ne ideas??
No luck Mayank... I have installed knoppix into harddisk... (hd install)
any incompatibilities with Debian platform like this??
initially it was I had Red hat in my hard disk... and I used to get atleast
3 service classes like Networkin rendering and capturing... and when I
installed knoppix in hd... Iam facin this problem...
Am I the only specimen who is facin this problem or what??
On 4/4/06, Mayank Batra <[email protected]> wrote:
>
> Sowmya,
>
> Can you try restarting the whole process i.e. remove all bluez modules,
> kill hcid and sdpd, remove your bluetooth adapter and reinsert it.
> Now insert all modules and start hcid and sdpd.
>
> Mayank
>
>
> On 4/4/06, Sowmya Gattupalli <[email protected]> wrote:
> >
> >
> >
> > Guys I think mine is a lil peculiar problem,,,, hope to get a solution
> > for here,.....
> >
> > Initially when I was running the knoppix live CD.... my "hcicongig -a".
> > had all the service classes including Networking,Rendering,Capturing and
> > Audio... I was delighted... but now it shows in this way!!
> >
> > (and I didn't even change hcid.conf)
> > root@bluetooth:~# hciconfig -a
> > hci0: Type: USB
> > BD Address: 00:09:DD:10:00:CC ACL MTU: 192:8 SCO MTU: 64:8
> > UP RUNNING PSCAN ISCAN
> > RX bytes:63 acl:0 sco:0 events:7 errors:0
> > TX bytes:27 acl:0 sco:0 commands:7 errors:0
> > Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> > Link policy:
> > Link mode: SLAVE ACCEPT
> > Name: 'Soumya-0'
> > Class: 0x000100
> > Service Classes: Unspecified
> > Device Class: Computer, Uncategorized
> > HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver:
> > 0x175
> > Manufacturer: Cambridge Silicon Radio (10)
> >
> >
> > How come are my Service classes "unspecified" ??
> > ne ideas??
> >
> >
>
>
Sowmya,
Can you try restarting the whole process i.e. remove all bluez modules, kill
hcid and sdpd, remove your bluetooth adapter and reinsert it.
Now insert all modules and start hcid and sdpd.
Mayank
On 4/4/06, Sowmya Gattupalli <[email protected]> wrote:
>
>
>
> Guys I think mine is a lil peculiar problem,,,, hope to get a solution for
> here,.....
>
> Initially when I was running the knoppix live CD.... my "hcicongig -a".
> had all the service classes including Networking,Rendering,Capturing and
> Audio... I was delighted... but now it shows in this way!!
>
> (and I didn't even change hcid.conf)
> root@bluetooth:~# hciconfig -a
> hci0: Type: USB
> BD Address: 00:09:DD:10:00:CC ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:63 acl:0 sco:0 events:7 errors:0
> TX bytes:27 acl:0 sco:0 commands:7 errors:0
> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy:
> Link mode: SLAVE ACCEPT
> Name: 'Soumya-0'
> Class: 0x000100
> Service Classes: Unspecified
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver:
> 0x175
> Manufacturer: Cambridge Silicon Radio (10)
>
>
> How come are my Service classes "unspecified" ??
> ne ideas??
>
>