hi all,
i need a code which its report signal strength of discovered devices.
thank a lot ,
PS: my bluetooth dongle epox BT-DG03 is compliant with spec. v1.1 but when i do :
~$ hciconfig hci0 features
hci0:
Type: USB
BD Address: 00:04:61:81:B8:45 ACL MTU: 192:8 SCO MTU: 64:8
Features: 0xff 0xff 0x0b 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<park state> <RSSI> <channel quality> <SCO link> <HV2 packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>
<transparent SCO>
i see here RSSI so thats mean can i take this signal strenght report ?
Hi Oezkan,
>
> i need a code which its report signal strength of discovered devices.
>
> thank a lot ,
>
> PS: my bluetooth dongle epox BT-DG03 is compliant with spec. v1.1 but
> when i do :
> ~$ hciconfig hci0 features
> hci0:
> Type: USB
> BD Address: 00:04:61:81:B8:45 ACL MTU: 192:8 SCO MTU:
> 64:8
> Features: 0xff 0xff 0x0b 0x00 0x00 0x00 0x00
> 0x00
> <3-slot packets> <5-slot packets> <encryption> <slot
> offset>
> <timing accuracy> <role switch> <hold mode> <sniff
> mode>
> <park state> <RSSI> <channel quality> <SCO link> <HV2
> packets>
> <HV3 packets> <u-law log> <A-law log> <CVSD> <paging
> scheme>
> <transparent SCO>
> i see here RSSI so thats mean can i take this signal strenght
> report ?
all Bluetooth 1.1 devices can only report the RSSI value for already
connected devices and even this doesn't return a good value all the
time. Some old dongles are rather buggy in this area.
However if you look for the RSSI value returned from the inquiry results
you need at least a Bluetooth 1.2 dongle that support "Inquiry with
RSSI".
Regards
Marcel
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel