Hi everyone,
I am trying to use a Socket CF card (revision F, model no "8510-00159 F")
with Linux (2.6.8.1-hh0 kernel) and Bluez on an HP Jornada 568 PDA for a
project for our lab.
It seems that I am running into the same problem that was described here:
http://sourceforge.net/mailarchive/message.php?msg_id=1427158
When I run:
root@jornada56x:~# hciconfig
hci0: Type: PCCARD
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN INIT RUNNING
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:0 acl:0 sco:0 commands:1 errors:0
However:
root@jornada56x:~# hciconfig hci0 up
Can't init device hci0. Connection timed out(110)
And:
root@jornada56x:~# hcidump -x
HCIDump - HCI packet analyzer ver 1.10
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0
At boot time I get this:
Starting Bluetooth subsystem:Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
hcid sdpdCan't open HIDP control socket: Protocol not supported
hiddCan't open RFCOMM control socket: Protocol not supported
rfcomm.
Starting PCMCIA services: cardmgr[879]: watching 1 socket
done.
cardmgr[880]: socket 0: Socket Bluetooth Card
Bluetooth: Nokia control data = 07 00
Any ideas/help are most appreciated, thanks in advance,
Catalin
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel