Hi
I do not have passkey-agent running , so I try to use auto for security
and hope it can send back the passkey auto.
My setting in hcid.conf is as below :
options {
# Automatically initialize new devices
autoinit yes;
# Security Manager mode
# none - Security manager disabled
# auto - Use local PIN for incoming connections
# user - Always ask user for a PIN
#
security auto;
# Pairing mode
# none - Pairing disabled
# multi - Allow pairing with already paired devices
# once - Pair once and deny successive attempts
pairing multi;
# Do the same as "hciconfig hci0 down" when SetMode("off")
# is called.
offmode devdown;
# Default PIN code for incoming connections
passkey "1234";
}
But this don't work :
When I try to start the bonding process following
http://wiki.bluez.org/wiki/HOWTO/Bonding
The output of hcidump :
~ # dbus-send --system --type=method_call --print-reply --dest=org.bluez
/org/bluez/hci0 org.bluez.Adapter.CreateBonding string:00:02:72:B0:00:26
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:02:72:B0:00:26 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 42 bdaddr 00:02:72:B0:00:26 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 42
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
> HCI Event: Max Slots Change (0x1b) plen 3
handle 42 slots 5
> HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 42 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 42
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:02:72:B0:00:26 mode 2 clkoffset 0x0000
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 42
Features: 0xff 0xff 0x05 0x38 0x18 0x18 0x00 0x00
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
< HCI Command: Authentication Requested (0x01|0x0011) plen 2
handle 42
> HCI Event: Command Status (0x0f) plen 4
Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:02:72:B0:00:26
< HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
bdaddr 00:02:72:B0:00:26
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:02:72:B0:00:26 name 'Raymond-pc'
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Negative Reply (0x01|0x000c) ncmd 1
status 0x00 bdaddr 00:02:72:B0:00:26
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:02:72:B0:00:26
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
bdaddr 00:02:72:B0:00:26
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
status 0x00 bdaddr 00:02:72:B0:00:26
> HCI Event: Auth Complete (0x06) plen 3
status 0x06 handle 42
Error: PIN or Key Missing
According to the wiki, this is the senario that : no passkey agent available
or rejection
But , Since I using security "auto", why it still looking for an agent ?
Raymond
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users