Hello,
I am getting deseperate regarding bluetooth under linux :-(
I got a kernel with which I could access my onboard usb bluetooth, but I
cannot anymore since at least 10 kernels rebuild...
I am using 2.6.5-mm3.
I don't find aynwhere exactly what is needed for Bluez, could someone
point me to the right config?
Right now I have:
CONFIG_BT=3Dy
CONFIG_BT_L2CAP=3Dy
CONFIG_BT_SCO=3Dy
CONFIG_BT_RFCOMM=3Dy
CONFIG_BT_RFCOMM_TTY=3Dy
CONFIG_BT_BNEP=3Dy
CONFIG_BT_BNEP_MC_FILTER=3Dy
CONFIG_BT_BNEP_PROTO_FILTER=3Dy
CONFIG_BT_HCIUSB=3Dy
CONFIG_BT_HCIUART=3Dy
CONFIG_BT_HCIUART_H4=3Dy
CONFIG_BT_HCIUART_BCSP=3Dy
CONFIG_BT_HCIVHCI=3Dy
CONFIG_USB=3Dy
CONFIG_USB_DEVICEFS=3Dy
CONFIG_USB_BANDWIDTH=3Dy
CONFIG_USB_DYNAMIC_MINORS=3Dy
CONFIG_USB_EHCI_HCD=3Dy
CONFIG_USB_EHCI_ROOT_HUB_TT=3Dy
CONFIG_USB_UHCI_HCD=3Dy
CONFIG_USB_STORAGE=3Dy
CONFIG_USB_SERIAL=3Dy
CONFIG_USB_SERIAL_VISOR=3Dy
And cat /proc/bus/usb/devices just show my hub and cards readers...
Thank for any info :-)
Gr=E9goire
_________________________________________________________________________=
_
http://algebra.epfl.ch/greg ICQ:16624071 mailto:[email protected]=
h
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
On Mon, Apr 12, 2004 at 05:44:15PM +0200, Marcel Holtmann wrote:
Hello Marcel :-)
> Sorry for that, but as long as USB don't finds your device I also can't
> help.
Another time, thank for all your help, I think there is a problem with
my MSI... that ? won't investigate later on...
Gr=E9goire
_________________________________________________________________________=
_
http://algebra.epfl.ch/greg ICQ:16624071 mailto:[email protected]=
h
Hi Gregoire,
> > if you use hotplug everything will be loaded for you. If not, you need
> > to load the USB host controller driver (I think uhci_hcd in your case)
> > and of course the Bluetooth driver (hci_usb).
>
> I use hotplug, everything regarding usb load fine, only bluetooth is not
> found... (same if I load things by hand).
of course. If the hotplug don't sees a Bluetooth device it don't loads
the driver ;)
> > If it worked once, you must find your old settings. But actually this is
> > not a Bluetooth related problem. If it gots more worse, ask the USB guys
> > for help.
>
> I can't find the working solution, and I will then live without
> bluetooth as it is much too hard to use it... at least with this stupid
> MSI onboard :-(
Sorry for that, but as long as USB don't finds your device I also can't
help.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
On Mon, Apr 12, 2004 at 05:21:07PM +0200, Marcel Holtmann wrote:
Hello Marcel :-)
> if you use hotplug everything will be loaded for you. If not, you need
> to load the USB host controller driver (I think uhci_hcd in your case)
> and of course the Bluetooth driver (hci_usb).
I use hotplug, everything regarding usb load fine, only bluetooth is not
found... (same if I load things by hand).
> If it worked once, you must find your old settings. But actually this i=
s
> not a Bluetooth related problem. If it gots more worse, ask the USB guy=
s
> for help.
I can't find the working solution, and I will then live without
bluetooth as it is much too hard to use it... at least with this stupid
MSI onboard :-(
Thank for all your help,
Gr=E9goire
_________________________________________________________________________=
_
http://algebra.epfl.ch/greg ICQ:16624071 mailto:[email protected]=
h
Hi Gregoire,
> OK, but then, is there anywhere an order on which I should load the
> modules?
if you use hotplug everything will be loaded for you. If not, you need
to load the USB host controller driver (I think uhci_hcd in your case)
and of course the Bluetooth driver (hci_usb).
> It did work with some kernel setup, but I have added some more options
> in the kernel (same kernel) and now I cannot find it back...
> I cannot test another unit on this "usb" because it is on the
> motherboard directly (and that way, it left me only 5 of the 6 usb bus).
>
> Maybe it's a problem with the new bus speed option in the kernel?
> (Root Hub Transaction Translators (EXPERIMENTAL) ) I'll try without and
> if case of success I'll repport it here :-)
If it worked once, you must find your old settings. But actually this is
not a Bluetooth related problem. If it gots more worse, ask the USB guys
for help.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
On Sun, Apr 11, 2004 at 06:41:48PM +0200, Marcel Holtmann wrote:
Hello Marcel :-)
> use it as modules, because it will be less complicated.
OK, but then, is there anywhere an order on which I should load the
modules?
> No USB Bluetooth adapter at the USB bus. Maybe you have to activate the
> bus itself in your BIOS. Check if another USB device (for example a
> mouse) will work in the same slot.
It did work with some kernel setup, but I have added some more options
in the kernel (same kernel) and now I cannot find it back...
I cannot test another unit on this "usb" because it is on the
motherboard directly (and that way, it left me only 5 of the 6 usb bus).
Maybe it's a problem with the new bus speed option in the kernel?
(Root Hub Transaction Translators (EXPERIMENTAL) ) I'll try without and
if case of success I'll repport it here :-)
There is a hack to huse it on a "true" usb under
http://www.overclockers.com/tips1102/
Gr=E9goire
_________________________________________________________________________=
_
http://algebra.epfl.ch/greg ICQ:16624071 mailto:[email protected]=
h
Hi Greogire,
> > I personally prefer having the USB and Bluetooth subsystem as modules,
> > but it should work in both ways. May you wanna try a modular system.
>
> I have also tried with everything in module (I have no preference...).
use it as modules, because it will be less complicated.
> http://www.computerbase.de/bild/article/91/63/ has a good picture of the
> Bluetooth for my motherboard (MSI Max2-BLR).
No USB Bluetooth adapter at the USB bus. Maybe you have to activate the
bus itself in your BIOS. Check if another USB device (for example a
mouse) will work in the same slot.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
On Sat, Apr 10, 2004 at 06:07:39PM +0200, Marcel Holtmann wrote:
Hello Marcel :-)
> I personally prefer having the USB and Bluetooth subsystem as modules,
> but it should work in both ways. May you wanna try a modular system.
I have also tried with everything in module (I have no preference...).
> Show us the content of /proc/bus/usb/devices and what do lspci and lsus=
b
> say? What kind of Bluetooth dongle do you have?
T: Bus=3D04 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.5-mm3 uhci_hcd
S: Product=3DIntel Corp. 82801DB USB (Hub #3)
S: SerialNumber=3D0000:00:1d.2
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
T: Bus=3D03 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.5-mm3 uhci_hcd
S: Product=3DIntel Corp. 82801DB USB (Hub #2)
S: SerialNumber=3D0000:00:1d.1
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
T: Bus=3D02 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.5-mm3 uhci_hcd
S: Product=3DIntel Corp. 82801DB USB (Hub #1)
S: SerialNumber=3D0000:00:1d.0
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
T: Bus=3D01 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D480 M=
xCh=3D 6
B: Alloc=3D 0/800 us ( 0%), #Int=3D 0, #Iso=3D 0
D: Ver=3D 2.00 Cls=3D09(hub ) Sub=3D00 Prot=3D01 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.5-mm3 ehci_hcd
S: Product=3DIntel Corp. 82801DB USB2
S: SerialNumber=3D0000:00:1d.7
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D256ms
T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D03 Cnt=3D01 Dev#=3D 3 Spd=3D480 M=
xCh=3D 0
D: Ver=3D 2.00 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 MxPS=3D64 #Cfgs=3D 1
P: Vendor=3D0424 ProdID=3D20fc Rev=3D 1.97
S: Manufacturer=3DSMSC
S: Product=3DUSB 2 Flash Media Device
S: SerialNumber=3D7777777777A6
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D80 MxPwr=3D 96mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 2 Cls=3D08(stor.) Sub=3D06 Prot=3D50
Driver=3Dusb-storage
E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 512 Ivl=3D125us
E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 512 Ivl=3D0ms
http://www.computerbase.de/bild/article/91/63/ has a good picture of the
Bluetooth for my motherboard (MSI Max2-BLR).
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridg=
e (rev 11)
Flags: bus master, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=3D64M]
Capabilities: [e4] #09 [a104]
Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge =
(rev 11) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 32
Bus: primary=3D00, secondary=3D01, subordinate=3D02, sec-latency=3D=
32
Memory behind bridge: dec00000-dfdfffff
Prefetchable memory behind bridge: da800000-de9fffff
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01) (prog-i=
f 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 398=
2
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at d400 [size=3D32]
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01) (prog-i=
f 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 398=
2
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at d800 [size=3D32]
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01) (prog-i=
f 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 398=
2
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at dc00 [size=3D32]
00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 01) (prog-if 20 [EH=
CI])
Subsystem: Micro-Star International Co., Ltd. 845PE Max (MS-6580)=
Onboard USB EHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at dfffbc00 (32-bit, non-prefetchable) [size=3D1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [2080]
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 81) (pro=
g-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=3D00, secondary=3D03, subordinate=3D03, sec-latency=3D=
32
I/O behind bridge: 0000a000-0000cfff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: dea00000-deafffff
00:1f.0 ISA bridge: Intel Corp. 82801DB LPC Interface Controller (rev 01)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. 82801DB Ultra ATA Storage Controller (=
rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 398=
2
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at fc00 [size=3D16]
Memory at 40000000 (32-bit, non-prefetchable) [size=3D1K]
00:1f.3 SMBus: Intel Corp. 82801DB/DBM SMBus Controller (rev 01)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 398=
2
Flags: medium devsel, IRQ 18
I/O ports at 0c00 [size=3D32]
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (re=
v 01) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G550 Dual Head DDR 32=
Mb
Flags: bus master, medium devsel, latency 32, IRQ 16
Memory at dc000000 (32-bit, prefetchable) [size=3D32M]
Memory at dfafc000 (32-bit, non-prefetchable) [size=3D16K]
Memory at df000000 (32-bit, non-prefetchable) [size=3D8M]
Expansion ROM at dfac0000 [disabled] [size=3D128K]
Capabilities: [dc] Power Management version 2
Capabilities: [f0] AGP version 2.0
03:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev =
06)
Subsystem: Creative Labs CT4832 SBLive! Value
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at b400 [size=3D32]
Capabilities: [dc] Power Management version 1
03:00.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (r=
ev 06)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 32
I/O ports at cc00 [size=3D8]
Capabilities: [dc] Power Management version 1
03:01.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH: Unknown device 0000
Flags: bus master, medium devsel, latency 32, IRQ 17
Memory at dfefbe00 (32-bit, non-prefetchable) [size=3D512]
03:02.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
Subsystem: Adaptec 29160LP Low Profile Ultra160 SCSI Controller
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 18
BIST result: 00
I/O ports at b000 [disabled] [size=3D256]
Memory at dfefa000 (64-bit, non-prefetchable) [size=3D4K]
Expansion ROM at dfec0000 [disabled] [size=3D128K]
Capabilities: [dc] Power Management version 2
03:03.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U
Flags: bus master, medium devsel, latency 32, IRQ 19
I/O ports at ac00 [disabled] [size=3D256]
Memory at dfef9000 (32-bit, non-prefetchable) [size=3D4K]
Expansion ROM at dfee0000 [disabled] [size=3D64K]
03:04.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH: Unknown device 0000
Flags: bus master, medium devsel, latency 32, IRQ 16
Memory at dfefbc00 (32-bit, non-prefetchable) [size=3D512]
03:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (CNR) Etherne=
t Controller (rev 81)
Subsystem: Intel Corp.: Unknown device 1039
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at dfef8000 (32-bit, non-prefetchable) [size=3D4K]
I/O ports at a800 [size=3D64]
Capabilities: [dc] Power Management version 2
03:0e.0 RAID bus controller: Promise Technology, Inc. PDC20276 IDE (rev 0=
1) (prog-if 85)
Subsystem: Promise Technology, Inc.: Unknown device 1275
Flags: bus master, 66Mhz, slow devsel, latency 32, IRQ 22
I/O ports at c800 [size=3D8]
I/O ports at c400 [size=3D4]
I/O ports at c000 [size=3D8]
I/O ports at bc00 [size=3D4]
I/O ports at b800 [size=3D16]
Memory at dfefc000 (32-bit, non-prefetchable) [size=3D16K]
Capabilities: [60] Power Management version 1
And lsudb:
Bus 004 Device 001: ID 0000:0000 =20
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0=20
bDeviceProtocol 0=20
bMaxPacketSize0 8
idVendor 0x0000=20
idProduct 0x0000=20
bcdDevice 2.06
iManufacturer 3 Linux 2.6.5-mm3 uhci_hcd
iProduct 2 Intel Corp. 82801DB USB (Hub #3)
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0=20
bInterfaceProtocol 0=20
iInterface 0=20
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=3D4)
0409 English(US)
Bus 003 Device 001: ID 0000:0000 =20
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0=20
bDeviceProtocol 0=20
bMaxPacketSize0 8
idVendor 0x0000=20
idProduct 0x0000=20
bcdDevice 2.06
iManufacturer 3 Linux 2.6.5-mm3 uhci_hcd
iProduct 2 Intel Corp. 82801DB USB (Hub #2)
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0=20
bInterfaceProtocol 0=20
iInterface 0=20
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=3D4)
0409 English(US)
Bus 002 Device 001: ID 0000:0000 =20
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0=20
bDeviceProtocol 0=20
bMaxPacketSize0 8
idVendor 0x0000=20
idProduct 0x0000=20
bcdDevice 2.06
iManufacturer 3 Linux 2.6.5-mm3 uhci_hcd
iProduct 2 Intel Corp. 82801DB USB (Hub #1)
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0=20
bInterfaceProtocol 0=20
iInterface 0=20
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=3D4)
0409 English(US)
Bus 001 Device 003: ID 0424:20fc Standard Microsystems Corp.=20
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0=20
bDeviceProtocol 0=20
bMaxPacketSize0 64
idVendor 0x0424 Standard Microsystems Corp.
idProduct 0x20fc=20
bcdDevice 1.97
iManufacturer 1 SMSC
iProduct 2 USB 2 Flash Media Device
iSerial 3 7777777777A6
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 96mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0=20
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 512
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 512
bInterval 0
unknown descriptor type: 07 21 07 e8 03 fe ff
Language IDs: (length=3D4)
0409 English(US)
Bus 001 Device 001: ID 0000:0000 =20
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0=20
bDeviceProtocol 1=20
bMaxPacketSize0 8
idVendor 0x0000=20
idProduct 0x0000=20
bcdDevice 2.06
iManufacturer 3 Linux 2.6.5-mm3 ehci_hcd
iProduct 2 Intel Corp. 82801DB USB2
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0=20
bInterfaceProtocol 0=20
iInterface 0=20
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 12
Language IDs: (length=3D4)
0409 English(US)
I recompil with every USB/BT as module...
Thank you very much,
Gr=E9goire
_________________________________________________________________________=
_
http://algebra.epfl.ch/greg ICQ:16624071 mailto:[email protected]=
h
Hi Gregoire,
> I am getting deseperate regarding bluetooth under linux :-(
>
> I got a kernel with which I could access my onboard usb bluetooth, but I
> cannot anymore since at least 10 kernels rebuild...
>
> I am using 2.6.5-mm3.
> I don't find aynwhere exactly what is needed for Bluez, could someone
> point me to the right config?
>
> Right now I have:
>
> CONFIG_BT=y
> CONFIG_BT_L2CAP=y
> CONFIG_BT_SCO=y
> CONFIG_BT_RFCOMM=y
> CONFIG_BT_RFCOMM_TTY=y
> CONFIG_BT_BNEP=y
> CONFIG_BT_BNEP_MC_FILTER=y
> CONFIG_BT_BNEP_PROTO_FILTER=y
> CONFIG_BT_HCIUSB=y
> CONFIG_BT_HCIUART=y
> CONFIG_BT_HCIUART_H4=y
> CONFIG_BT_HCIUART_BCSP=y
> CONFIG_BT_HCIVHCI=y
> CONFIG_USB=y
> CONFIG_USB_DEVICEFS=y
> CONFIG_USB_BANDWIDTH=y
> CONFIG_USB_DYNAMIC_MINORS=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_ROOT_HUB_TT=y
> CONFIG_USB_UHCI_HCD=y
> CONFIG_USB_STORAGE=y
> CONFIG_USB_SERIAL=y
> CONFIG_USB_SERIAL_VISOR=y
>
> And cat /proc/bus/usb/devices just show my hub and cards readers...
I personally prefer having the USB and Bluetooth subsystem as modules,
but it should work in both ways. May you wanna try a modular system.
Show us the content of /proc/bus/usb/devices and what do lspci and lsusb
say? What kind of Bluetooth dongle do you have?
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users