I wonder if anyone has had a problem with Bluetooth in linux-2.6.5?
I have a Sony C1VFK Picturebook with built-in bluetooth.
Everything works fine in 2.6.3,
buit when I go to 2.6.5 I get the oops below.
I should say that this occurs after "service bluetooth restart"
and "spicctrl -l1"
(the latter being required to activate bluetooth on this machine).
It is possible that this has nothing to do with bluetooth,
and is a USB problem.
I give below the output of ksymsoops when fed
the relevant part of dmesg output,
and this actual output.
Any suggestions gratefully received.
===============================================
ksymoops 2.4.9 on i686 2.6.5. Options used
-V (default)
-k /proc/kallsyms (specified)
-l /proc/modules (default)
-o /lib/modules/2.6.5/ (default)
-m /usr/src/linux/System.map (default)
Warning (read_ksyms): no kernel symbols in ksyms, is /proc/kallsyms a valid
ksyms file?
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Error (regular_file): read_system_map stat /usr/src/linux/System.map failed
Warning (merge_maps): no symbols in merged map
Unable to handle kernel NULL pointer dereference at virtual address 00000004
cf8dea84
*pde = 0a094067
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<cf8dea84>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010286 (2.6.5)
eax: c72a51e0 ebx: 00000000 ecx: 00000286 edx: cefef0a0
esi: 00000001 edi: 00000000 ebp: cab55c00 esp: cb9c5d24
ds: 007b es: 007b ss: 0068
Stack: 00001388 00000000 00000002 00000001 c72cb330 cab55c00 cf8ded78 cab55c00
c72a51e0 0000000b 00000001 00000002 00000001 00000000 00000000 00001388
00000000 c72a51e0 00000000 c72cb780 c72cb838 c72a52e0 cf8256dc cab55c00
Call Trace:
[<cf8ded78>] usb_set_interface+0xb8/0x1c0 [usbcore]
[<cf8256dc>] hci_usb_probe+0x23c/0x4b0 [hci_usb]
[<c0114c4a>] __wake_up_common+0x3a/0x70
[<cf8d80d9>] usb_probe_interface+0xb9/0xe0 [usbcore]
[<c01ef04f>] bus_match+0x3f/0x70
[<c01ef0bf>] device_attach+0x3f/0xa0
[<c01ef2cb>] bus_add_device+0x5b/0xa0
[<c01ee111>] device_add+0xa1/0x130
[<cf8df1b5>] usb_set_configuration+0x235/0x2e0 [usbcore]
[<cf8d934f>] usb_new_device+0x2df/0x5c0 [usbcore]
[<cf8db2ca>] hub_port_connect_change+0x1da/0x2f0 [usbcore]
[<cf8db754>] hub_events+0x374/0x420 [usbcore]
[<cf8db835>] hub_thread+0x35/0x110 [usbcore]
[<c0114bf0>] default_wake_function+0x0/0x20
[<cf8db800>] hub_thread+0x0/0x110 [usbcore]
[<c0104e8d>] kernel_thread_helper+0x5/0x18
Code: 80 7b 04 00 74 26 31 f6 8d 74 26 00 8b 43 0c 47 0f b6 44 30
>>EIP; cf8dea84 No symbols available <=====
Trace; cf8ded78 No symbols available
Trace; cf8256dc No symbols available
Trace; c0114c4a No symbols available
Trace; cf8d80d9 No symbols available
Trace; c01ef04f No symbols available
Trace; c01ef0bf No symbols available
Trace; c01ef2cb No symbols available
Trace; c01ee111 No symbols available
Trace; cf8df1b5 No symbols available
Trace; cf8d934f No symbols available
Trace; cf8db2ca No symbols available
Trace; cf8db754 No symbols available
Trace; cf8db835 No symbols available
Trace; c0114bf0 No symbols available
Trace; cf8db800 No symbols available
Trace; c0104e8d No symbols available
Code; cf8dea84 No symbols available
00000000 <_EIP>:
Code; cf8dea84 No symbols available <=====
0: 80 7b 04 00 cmpb $0x0,0x4(%ebx) <=====
Code; cf8dea88 No symbols available
4: 74 26 je 2c <_EIP+0x2c>
Code; cf8dea8a No symbols available
6: 31 f6 xor %esi,%esi
Code; cf8dea8c No symbols available
8: 8d 74 26 00 lea 0x0(%esi,1),%esi
Code; cf8dea90 No symbols available
c: 8b 43 0c mov 0xc(%ebx),%eax
Code; cf8dea93 No symbols available
f: 47 inc %edi
Code; cf8dea94 No symbols available
10: 0f b6 44 30 00 movzbl 0x0(%eax,%esi,1),%eax
2 warnings and 1 error issued. Results may not be reliable.
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
> actually I hope that the upcoming 2.6.6-rc3 will fix all of these
> problems. If not, then ask the USB guys for a patch.
Well, at least things are improving. When I started the previous thread
about this back in March (subject: crash on remove, I think), the
machine would completely lock, and I'd never see a panic or an oops.
Now, I get an oops, and the machine keeps running. So, I guess that's
progress!
In any event, that's my desktop (VIA chipset). The solution, for the
time being, is simply not to remove the Bluetooth key. Everything has
always worked fine on my laptop (ALi chipset). You know the old joke:
Patient: Doctor! It hurts when I do this!
* Patient does something
Doctor: Well, don't do that!
Russell
Hi Russel,
> I also get a crash when removing USB Bluetooth keys, but I've had that
> problem with all 2.6 kernels.
>
> You can see the first insert and remove events, which did not cause a
> crash, followed the oops. I figured I'd post to coroborate the issue Tim
> is having.
actually I hope that the upcoming 2.6.6-rc3 will fix all of these
problems. If not, then ask the USB guys for a patch.
Regards
Marcel
-------------------------------------------------------
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek
For a limited time only, get FREE Ground shipping on all orders of $35
or more. Hurry up and shop folks, this offer expires April 30th!
http://www.thinkgeek.com/freeshipping/?cpg=12297
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
I forgot to mention that after the oops, it appears to completely kill
whatever USB host the key was plugged into. Not only are decives pluged
into that port not detected, but they don't even receive power.
Russell
-------------------------------------------------------
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek
For a limited time only, get FREE Ground shipping on all orders of $35
or more. Hurry up and shop folks, this offer expires April 30th!
http://www.thinkgeek.com/freeshipping/?cpg=12297
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
I also get a crash when removing USB Bluetooth keys, but I've had that
problem with all 2.6 kernels.
You can see the first insert and remove events, which did not cause a
crash, followed the oops. I figured I'd post to coroborate the issue Tim
is having.
Russell
Apr 23 03:06:15 localhost kernel: usb 4-1: new full speed USB device using address 2
Apr 23 03:06:16 localhost hal.hotplug[7797]: waiting for usb info at /devices/pci0000:00/0000:00:10.3/usb4/4-1
Apr 23 03:06:16 localhost kernel: Bluetooth: Core ver 2.4
Apr 23 03:06:16 localhost kernel: NET: Registered protocol family 31
Apr 23 03:06:16 localhost kernel: Bluetooth: HCI device and connection manager initialized
Apr 23 03:06:16 localhost kernel: Bluetooth: HCI socket layer initialized
Apr 23 03:06:16 localhost kernel: Bluetooth: HCI USB driver ver 2.5
Apr 23 03:06:16 localhost kernel: drivers/usb/core/usb.c: registered new driver hci_usb
Apr 23 03:06:16 localhost usb.agent[7771]: hci_usb: loaded sucessfully
Apr 23 03:06:16 localhost usb.agent[7772]: hci_usb: loaded sucessfully
Apr 23 03:06:16 localhost usb.agent[7770]: hci_usb: loaded sucessfully
Apr 23 03:06:17 localhost hal.hotplug[7878]: waiting for usb info at /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1:1.0
Apr 23 03:06:17 localhost hal.hotplug[7878]: /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1:1.0 is an USB interface
Apr 23 03:06:17 localhost hal.hotplug[7878]: got info for /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1:1.0 (waited 0 ms)
Apr 23 03:06:17 localhost hal.hotplug[7879]: waiting for bluetooth info at /class/bluetooth/hci0
Apr 23 03:06:17 localhost hal.hotplug[7879]: Dont know how to wait for bluetooth at /class/bluetooth/hci0; sleeping 1000 ms
Apr 23 03:06:17 localhost hal.hotplug[7880]: waiting for usb info at /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1:1.2
Apr 23 03:06:17 localhost hal.hotplug[7880]: /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1:1.2 is an USB interface
Apr 23 03:06:17 localhost hal.hotplug[7880]: got info for /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1:1.2 (waited 0 ms)
Apr 23 03:06:17 localhost hal.hotplug[7881]: waiting for usb info at /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1:1.1
Apr 23 03:06:17 localhost hal.hotplug[7881]: /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1:1.1 is an USB interface
Apr 23 03:06:17 localhost hal.hotplug[7881]: got info for /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1:1.1 (waited 0 ms)
Apr 23 03:06:36 localhost hal.hotplug[7797]: timed out for /devices/pci0000:00/0000:00:10.3/usb4/4-1 (waited 20000 ms)
Apr 23 03:06:51 localhost kernel: usb 4-1: USB disconnect, address 2
Apr 23 03:07:06 localhost kernel: usb 4-1: new full speed USB device using address 3
Apr 23 03:07:06 localhost usb.agent[7992]: hci_usb: already loaded
Apr 23 03:07:06 localhost hal.hotplug[8020]: waiting for usb info at /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1:1.0
Apr 23 03:07:06 localhost hal.hotplug[8020]: /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1:1.0 is an USB interface
Apr 23 03:07:06 localhost kernel: printing eip:
Apr 23 03:07:06 localhost kernel: e08cdee4
Apr 23 03:07:06 localhost kernel: Oops: 0000 [#1]
Apr 23 03:07:06 localhost kernel: PREEMPT
Apr 23 03:07:06 localhost kernel: CPU: 0
Apr 23 03:07:06 localhost kernel: EIP: 0060:[<e08cdee4>] Not tainted
Apr 23 03:07:06 localhost kernel: EFLAGS: 00010286 (2.6.5)
Apr 23 03:07:06 localhost kernel: EIP is at usb_disable_interface+0x14/0x50 [usbcore]
Apr 23 03:07:06 localhost kernel: eax: ded02980 ebx: 00000000 ecx: df12e000 edx: dfeef100
Apr 23 03:07:06 localhost kernel: esi: 00000002 edi: 00000000 ebp: cb9b4800 esp: df12fd44
Apr 23 03:07:06 localhost kernel: ds: 007b es: 007b ss: 0068
Apr 23 03:07:06 localhost kernel: Process khubd (pid: 998, threadinfo=df12e000 task=df131700)
Apr 23 03:07:06 localhost kernel: Stack: 00000002 0000000b 00000001 00000002 ddecc6b0 cb9b4800 e08ce167 cb9b4800
Apr 23 03:07:06 localhost kernel: ded02980 0000000b 00000001 00000002 00000001 00000000 00000000 00001388
Apr 23 03:07:06 localhost kernel: 00000000 ded02980 00000000 d5d99280 d5d99338 d5d99980 e0a43abf cb9b4800
Apr 23 03:07:06 localhost kernel: Call Trace:
Apr 23 03:07:06 localhost kernel: [<e08ce167>] usb_set_interface+0xb7/0x180 [usbcore]
Apr 23 03:07:06 localhost kernel: [<e0a43abf>] hci_usb_probe+0x22f/0x490 [hci_usb]
Apr 23 03:07:06 localhost kernel: [<c0170606>] alloc_inode+0x146/0x150
Apr 23 03:07:06 localhost kernel: [<c018c69d>] sysfs_new_inode+0x5d/0xb0
Apr 23 03:07:06 localhost kernel: [<e08c8081>] usb_probe_interface+0x61/0x80 [usbcore]
Apr 23 03:07:06 localhost kernel: [<c02dd30f>] bus_match+0x3f/0x70
Apr 23 03:07:06 localhost kernel: [<c02dd381>] device_attach+0x41/0xa0
Apr 23 03:07:06 localhost kernel: [<c02dd56b>] bus_add_device+0x5b/0xa0
Apr 23 03:07:06 localhost kernel: [<c02dc411>] device_add+0xa1/0x130
Apr 23 03:07:06 localhost kernel: [<e08ce506>] usb_set_configuration+0x1d6/0x270 [usbcore]
Apr 23 03:07:06 localhost kernel: [<e08c90e9>] usb_new_device+0x249/0x3c0 [usbcore]
Apr 23 03:07:06 localhost kernel: [<e08caa15>] hub_port_connect_change+0x175/0x280 [usbcore]
Apr 23 03:07:06 localhost kernel: [<e08cadea>] hub_events+0x2ca/0x340 [usbcore]
Apr 23 03:07:06 localhost kernel: [<e08cae8d>] hub_thread+0x2d/0xf0 [usbcore]
Apr 23 03:07:06 localhost kernel: [<c010924e>] ret_from_fork+0x6/0x14
Apr 23 03:07:06 localhost kernel: [<c011cd80>] default_wake_function+0x0/0x20
Apr 23 03:07:06 localhost kernel: [<e08cae60>] hub_thread+0x0/0xf0 [usbcore]
Apr 23 03:07:06 localhost kernel: [<c0107291>] kernel_thread_helper+0x5/0x14
Apr 23 03:07:06 localhost kernel:
Apr 23 03:07:06 localhost kernel: Code: 80 7b 04 00 74 26 31 f6 8d 74 26 00 8b 43 0c 47 0f b6 44 30
Apr 23 03:07:08 localhost hal.hotplug[8022]: waiting for usb info at /devices/pci0000:00/0000:00:10.3/usb4/4-1
Apr 23 03:07:26 localhost hal.hotplug[8020]: timed out for /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1:1.0 (waited 20000 ms)
Apr 23 03:07:28 localhost hal.hotplug[8022]: timed out for /devices/pci0000:00/0000:00:10.3/usb4/4-1 (waited 20000 ms)
On Wed, Apr 21, 2004 at 04:27:25AM +0100, Timothy Murphy wrote:
> I wonder if anyone has had a problem with Bluetooth in linux-2.6.5?
> I have a Sony C1VFK Picturebook with built-in bluetooth.
> Everything works fine in 2.6.3,
> buit when I go to 2.6.5 I get the oops below.
> I should say that this occurs after "service bluetooth restart"
> and "spicctrl -l1"
> (the latter being required to activate bluetooth on this machine).
>
> It is possible that this has nothing to do with bluetooth,
> and is a USB problem.
>
> I give below the output of ksymsoops when fed
> the relevant part of dmesg output,
> and this actual output.
>
> Any suggestions gratefully received.
>
> ===============================================
> ksymoops 2.4.9 on i686 2.6.5. Options used
> -V (default)
> -k /proc/kallsyms (specified)
> -l /proc/modules (default)
> -o /lib/modules/2.6.5/ (default)
> -m /usr/src/linux/System.map (default)
>
> Warning (read_ksyms): no kernel symbols in ksyms, is /proc/kallsyms a valid
> ksyms file?
> No modules in ksyms, skipping objects
> No ksyms, skipping lsmod
> Error (regular_file): read_system_map stat /usr/src/linux/System.map failed
> Warning (merge_maps): no symbols in merged map
> Unable to handle kernel NULL pointer dereference at virtual address 00000004
> cf8dea84
> *pde = 0a094067
> Oops: 0000 [#1]
> CPU: 0
> EIP: 0060:[<cf8dea84>] Not tainted
> Using defaults from ksymoops -t elf32-i386 -a i386
> EFLAGS: 00010286 (2.6.5)
> eax: c72a51e0 ebx: 00000000 ecx: 00000286 edx: cefef0a0
> esi: 00000001 edi: 00000000 ebp: cab55c00 esp: cb9c5d24
> ds: 007b es: 007b ss: 0068
> Stack: 00001388 00000000 00000002 00000001 c72cb330 cab55c00 cf8ded78 cab55c00
> c72a51e0 0000000b 00000001 00000002 00000001 00000000 00000000 00001388
> 00000000 c72a51e0 00000000 c72cb780 c72cb838 c72a52e0 cf8256dc cab55c00
> Call Trace:
> [<cf8ded78>] usb_set_interface+0xb8/0x1c0 [usbcore]
> [<cf8256dc>] hci_usb_probe+0x23c/0x4b0 [hci_usb]
> [<c0114c4a>] __wake_up_common+0x3a/0x70
> [<cf8d80d9>] usb_probe_interface+0xb9/0xe0 [usbcore]
> [<c01ef04f>] bus_match+0x3f/0x70
> [<c01ef0bf>] device_attach+0x3f/0xa0
> [<c01ef2cb>] bus_add_device+0x5b/0xa0
> [<c01ee111>] device_add+0xa1/0x130
> [<cf8df1b5>] usb_set_configuration+0x235/0x2e0 [usbcore]
> [<cf8d934f>] usb_new_device+0x2df/0x5c0 [usbcore]
> [<cf8db2ca>] hub_port_connect_change+0x1da/0x2f0 [usbcore]
> [<cf8db754>] hub_events+0x374/0x420 [usbcore]
> [<cf8db835>] hub_thread+0x35/0x110 [usbcore]
> [<c0114bf0>] default_wake_function+0x0/0x20
> [<cf8db800>] hub_thread+0x0/0x110 [usbcore]
> [<c0104e8d>] kernel_thread_helper+0x5/0x18
> Code: 80 7b 04 00 74 26 31 f6 8d 74 26 00 8b 43 0c 47 0f b6 44 30
>
>
> >>EIP; cf8dea84 No symbols available <=====
>
> Trace; cf8ded78 No symbols available
> Trace; cf8256dc No symbols available
> Trace; c0114c4a No symbols available
> Trace; cf8d80d9 No symbols available
> Trace; c01ef04f No symbols available
> Trace; c01ef0bf No symbols available
> Trace; c01ef2cb No symbols available
> Trace; c01ee111 No symbols available
> Trace; cf8df1b5 No symbols available
> Trace; cf8d934f No symbols available
> Trace; cf8db2ca No symbols available
> Trace; cf8db754 No symbols available
> Trace; cf8db835 No symbols available
> Trace; c0114bf0 No symbols available
> Trace; cf8db800 No symbols available
> Trace; c0104e8d No symbols available
>
> Code; cf8dea84 No symbols available
> 00000000 <_EIP>:
> Code; cf8dea84 No symbols available <=====
> 0: 80 7b 04 00 cmpb $0x0,0x4(%ebx) <=====
> Code; cf8dea88 No symbols available
> 4: 74 26 je 2c <_EIP+0x2c>
> Code; cf8dea8a No symbols available
> 6: 31 f6 xor %esi,%esi
> Code; cf8dea8c No symbols available
> 8: 8d 74 26 00 lea 0x0(%esi,1),%esi
> Code; cf8dea90 No symbols available
> c: 8b 43 0c mov 0xc(%ebx),%eax
> Code; cf8dea93 No symbols available
> f: 47 inc %edi
> Code; cf8dea94 No symbols available
> 10: 0f b6 44 30 00 movzbl 0x0(%eax,%esi,1),%eax
>
>
> 2 warnings and 1 error issued. Results may not be reliable.
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek
For a limited time only, get FREE Ground shipping on all orders of $35
or more. Hurry up and shop folks, this offer expires April 30th!
http://www.thinkgeek.com/freeshipping/?cpg=12297
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
On Wednesday 21 April 2004 13:32, Marcel Holtmann wrote:
> > I wonder if anyone has had a problem with Bluetooth in linux-2.6.5?
> > I have a Sony C1VFK Picturebook with built-in bluetooth.
> > Everything works fine in 2.6.3,
> > buit when I go to 2.6.5 I get the oops below.
> > I should say that this occurs after "service bluetooth restart"
> > and "spicctrl -l1"
> > (the latter being required to activate bluetooth on this machine).
> >
> > It is possible that this has nothing to do with bluetooth,
> > and is a USB problem.
>
> give 2.6.6-rc2 a shot, because it includes the outstanding Bluetooth and
> USB updates. If it still oopses report it on the USB mailing list.
Thanks for the suggestion.
This works fine, as shown below.
I also tried 2.6.4, which worked fine.
So it is only 2.6.5 which caused trouble.
I guess I can forget about it.
===========================================
[tim@martha linux-2.6.6-rc2]$ hciconfig -a
hci0: Type: USB
BD Address: 08:00:46:21:5C:E3 ACL MTU: 128:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:399 acl:0 sco:0 events:16 errors:0
TX bytes:305 acl:0 sco:0 commands:15 errors:0
Features: 0xff 0xff 0x05 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'martha.murphy.ie-0'
Class: 0x120104
Service Classes: Networking, Object Transfer
Device Class: Computer, Desktop workstation
HCI Ver: 1.0b (0x0) HCI Rev: 0x60 LMP Ver: 1.1 (0x1) LMP Subver: 0x60
Manufacturer: Cambridge Silicon Radio (10)
===========================================
--
Timothy Murphy
e-mail (<80k only): tim /at/ birdsnest.maths.tcd.ie
tel: +353-86-2336090, +353-1-2842366
s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Nicholas,
> > give 2.6.6-rc2 a shot, because it includes the outstanding Bluetooth and
> > USB updates. If it still oopses report it on the USB mailing list.
>
> It should solve his problem, as it it possible too connect the dongle,
> when hci_usb already loaded. Unfortunately it seems to contain a bunch
> of new problems.
> You can't unplug the dongle or unload the hci_usb module anymore, without
> crashing the usb subsystem.
there are some outstanding USB patches. Report all problems to the USB
mailing list or try the 2.6.6-rc2-mmX if available.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
On 0, Marcel Holtmann <[email protected]> wrote:
> > > I wonder if anyone has had a problem with Bluetooth in linux-2.6.5?
> > I have a Sony C1VFK Picturebook with built-in bluetooth.
> > Everything works fine in 2.6.3,
> > buit when I go to 2.6.5 I get the oops below.
> > I should say that this occurs after "service bluetooth restart"
> > and "spicctrl -l1"
> > (the latter being required to activate bluetooth on this machine).
> >
> > It is possible that this has nothing to do with bluetooth,
> > and is a USB problem.
>
> give 2.6.6-rc2 a shot, because it includes the outstanding Bluetooth and
> USB updates. If it still oopses report it on the USB mailing list.
It should solve his problem, as it it possible too connect the dongle,
when hci_usb already loaded. Unfortunately it seems to contain a bunch
of new problems.
You can't unplug the dongle or unload the hci_usb module anymore, without
crashing the usb subsystem.
nicholas
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Timothy,
> I wonder if anyone has had a problem with Bluetooth in linux-2.6.5?
> I have a Sony C1VFK Picturebook with built-in bluetooth.
> Everything works fine in 2.6.3,
> buit when I go to 2.6.5 I get the oops below.
> I should say that this occurs after "service bluetooth restart"
> and "spicctrl -l1"
> (the latter being required to activate bluetooth on this machine).
>
> It is possible that this has nothing to do with bluetooth,
> and is a USB problem.
give 2.6.6-rc2 a shot, because it includes the outstanding Bluetooth and
USB updates. If it still oopses report it on the USB mailing list.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
On 0, Timothy Murphy <[email protected]> wrote:
> I wonder if anyone has had a problem with Bluetooth in linux-2.6.5?
> I have a Sony C1VFK Picturebook with built-in bluetooth.
> Everything works fine in 2.6.3,
> buit when I go to 2.6.5 I get the oops below.
> I should say that this occurs after "service bluetooth restart"
> and "spicctrl -l1"
> (the latter being required to activate bluetooth on this machine).
>
> It is possible that this has nothing to do with bluetooth,
> and is a USB problem.
It is probably a bug in the USB Subsystem of 2.6.5, which appears when
the module hci_usb is already loaded befor the USB BT dongle is
connected to the USB bus. I don't know the way your internal BT is
realized. You might try to unload the hci_usb driver, activate the bt
subsystem and then load it again. Or you just compile your kernel
without the SCO support for hci_usb.
nicholas
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users