Hi there,
I'm using diNovo keyb/mice, and I always have this problem, from
2.6.2-mhx to 6.7.1-mh1 and the new hipd kernel module.
Let me list my hardware (only the USB port I'm using for BT hub) :
0000:00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
The problem is that the USB bus (?) died after some time to work (couple
of days), not depend what I'm doing (use keyboard, mice, or nothing).
There is the dmesg related :
uhci_hcd 0000:00:10.1: host system error, PCI problems?
uhci_hcd 0000:00:10.1: host controller halted, very bad!
Complete USB info for that port :
lspci -vvv
0000:00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
(prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown
device c060
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
And there is the same status BEFORE hang :
0000:00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
(prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown
device c060
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Could you help me ? This is a very boring problem.
Best regards
--
Alexandre
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit http://www.blackhat.com
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Alexandre,
> > > There is the dmesg related :
> > > uhci_hcd 0000:00:10.1: host system error, PCI problems?
> > > uhci_hcd 0000:00:10.1: host controller halted, very bad!
> >
> > this VIA UHCI host controllers seem to be buggy in some cases. Try to
> > compile your kernel without CONFIG_BT_HCIUSB_SCO.
>
> Tested, now with -mh2, same thing. Is this related to USB stack ? If so,
> I'm on the wrong list :-(
it is maybe a Linux USB problem. Try the 2.6.8-rc2 kernel and if it
still occurs ask them.
Or this is a hardware problem. Try a BIOS update. Buy yourself a new USB
PCI card without a VIA chip or better a OHCI controller on it.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Le ven 09/07/2004 ? 12:13, Marcel Holtmann a ?crit :
Marcel,
Again, and again, thanks for your time.
> > There is the dmesg related :
> > uhci_hcd 0000:00:10.1: host system error, PCI problems?
> > uhci_hcd 0000:00:10.1: host controller halted, very bad!
>
> this VIA UHCI host controllers seem to be buggy in some cases. Try to
> compile your kernel without CONFIG_BT_HCIUSB_SCO.
Tested, now with -mh2, same thing. Is this related to USB stack ? If so,
I'm on the wrong list :-(
Best Regards
--
Alexandre
Hi Marcel,
Le ven 09/07/2004 ? 12:13, Marcel Holtmann a ?crit :
> Hi Alexandre,
>
> > I'm using diNovo keyb/mice, and I always have this problem, from
> > 2.6.2-mhx to 6.7.1-mh1 and the new hipd kernel module.
> >
> > Let me list my hardware (only the USB port I'm using for BT hub) :
> > 0000:00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
> >
> > The problem is that the USB bus (?) died after some time to work (couple
> > of days), not depend what I'm doing (use keyboard, mice, or nothing).
> >
> > There is the dmesg related :
> > uhci_hcd 0000:00:10.1: host system error, PCI problems?
> > uhci_hcd 0000:00:10.1: host controller halted, very bad!
>
> this VIA UHCI host controllers seem to be buggy in some cases. Try to
> compile your kernel without CONFIG_BT_HCIUSB_SCO.
Huh ?
I'll try it now !
And, again, thanks for your support/time :-)
--
Alexandre
Hi Alexandre,
> I'm using diNovo keyb/mice, and I always have this problem, from
> 2.6.2-mhx to 6.7.1-mh1 and the new hipd kernel module.
>
> Let me list my hardware (only the USB port I'm using for BT hub) :
> 0000:00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
>
> The problem is that the USB bus (?) died after some time to work (couple
> of days), not depend what I'm doing (use keyboard, mice, or nothing).
>
> There is the dmesg related :
> uhci_hcd 0000:00:10.1: host system error, PCI problems?
> uhci_hcd 0000:00:10.1: host controller halted, very bad!
this VIA UHCI host controllers seem to be buggy in some cases. Try to
compile your kernel without CONFIG_BT_HCIUSB_SCO.
Regards
Marcel
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit http://www.blackhat.com
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users