Hi all. I am having some trouble setting up my pand
connection between two ipaq's running familiar 0.8.2.
bluetooth is active on both devices.I followed the
pand howto by doing:
1) modprobe bnep's on both ipaqs
2) set one as master and confirmed it
3) pand --listen --role GN on the master
4) pand --connect 'master-address' which i got from
hcitool scan
Then i get the following message
root@h3600:/etc/bluetooth# udhcpc[29501]: udhcpc
(v0.9.9-pre) started
udhcpc[29501]: SIOCGIFINDEX failed!: No such device
do i need to load some stuff somewhere? I did not
follow some of the initial package installations as i
thought all were now integrated into the linux kernel
(mine is Linux version 2.4.19-rmk6-pxa1-hh37).
Vinod
__________________________________
Yahoo! Mail Mobile
Take Yahoo! Mail with you! Check email on your mobile phone.
http://mobile.yahoo.com/learn/mail
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Vinod,
> I am having some trouble setting up my pand
> connection between two ipaq's running familiar 0.8.2.
>
> bluetooth is active on both devices.I followed the
> pand howto by doing:
> 1) modprobe bnep's on both ipaqs
> 2) set one as master and confirmed it
> 3) pand --listen --role GN on the master
> 4) pand --connect 'master-address' which i got from
> hcitool scan
skip step 2, because it may cause troubles.
> Then i get the following message
>
> root@h3600:/etc/bluetooth# udhcpc[29501]: udhcpc
> (v0.9.9-pre) started
> udhcpc[29501]: SIOCGIFINDEX failed!: No such device
What else do you see in the syslog. Run "hcidump -X -V" as root to check
the BNEP connection setup.
> do i need to load some stuff somewhere? I did not
> follow some of the initial package installations as i
> thought all were now integrated into the linux kernel
> (mine is Linux version 2.4.19-rmk6-pxa1-hh37).
Not that I know of. However never version are always better.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users