Halu!
How do I enable support for multiple instances of an Obex server. Im using
OPD. What Im trying to do is setup two OPD servers on my computer. Two
bluetooth dongles will be used. One of the dongles listen to rfcomm channel
10 and the other to channel 3. I want one instance of OPD to listen to rfcomm
channel 10 on /dev/rfcomm0 and the other one to channel 3 on /dev/rfcomm1.
If I run one instance of opd on channel 10, it works fine but when I try to
run the 2nd opd on channel 3 i get the error message:
opd[4561]: Failed to register BtOBEX server on RFCOMM channel 10. (-1 / 98)
It seems that everytime I run opd, its default rfcomm device is /dev/rfcomm0.
Note: error 98 stands for " Address already in use "
How do I make OPD run on a specified rfcomm device (say on /dev/rfcomm1)?
I tried looking at the code of OPD but I cant seem to find how to change the
default rfcomm device. I also tried binding my bluetooth dongles to specified
rfcomm devices and channels but it still doesnt work.
Any help/insight is greatly appreciated.
Many thanks. :)
-jan
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Janice,
> How do I enable support for multiple instances of an Obex server. Im using
> OPD. What Im trying to do is setup two OPD servers on my computer. Two
> bluetooth dongles will be used. One of the dongles listen to rfcomm channel
> 10 and the other to channel 3. I want one instance of OPD to listen to rfcomm
> channel 10 on /dev/rfcomm0 and the other one to channel 3 on /dev/rfcomm1.
>
> If I run one instance of opd on channel 10, it works fine but when I try to
> run the 2nd opd on channel 3 i get the error message:
> opd[4561]: Failed to register BtOBEX server on RFCOMM channel 10. (-1 / 98)
> It seems that everytime I run opd, its default rfcomm device is /dev/rfcomm0.
> Note: error 98 stands for " Address already in use "
>
> How do I make OPD run on a specified rfcomm device (say on /dev/rfcomm1)?
> I tried looking at the code of OPD but I cant seem to find how to change the
> default rfcomm device. I also tried binding my bluetooth dongles to specified
> rfcomm devices and channels but it still doesnt work.
I only looked at the opd code once, but I am quite sure that it does not
use the RFCOMM terminal emulation that provides you with /dev/rfcommX
devices and thus this report makes not really sense. Show us what
commands you are using.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users