Hello,
My PDA used to find the device when I had Fedora Core 5, but cannot
when I upgraded to FC6. hcid.conf is default from FC6 (bluez-utils-3.7-2):
options {
autoinit yes;
security user;
pairing multi;
passkey "BlueZ";
}
device {
name "%h-%d";
class 0x120104;
#pkt_type DH1,DM1,HV1;
iscan enable; pscan enable;
lm accept;
lp rswitch,hold,sniff,park;
}
I launched bluetooth-properties and selected
"Visible and connectable for other devices",
"Make adapter invisible after" set to never.
hciconfig -a
hci0: Type: USB
BD Address: 00:13:46:00:12:CB ACL MTU: 377:10 SCO MTU: 16:0
UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:8639 acl:0 sco:0 events:249 errors:0
TX bytes:5296 acl:0 sco:0 commands:202 errors:0
Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
Packet type: DM3 DM5 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'xxx-0'
Class: 0x120104
Service Classes: Networking, Object Transfer
Device Class: Computer, Desktop workstation
HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x309
Manufacturer: Broadcom Corporation (15)
Any ideas why PDA cannot find the device? I found in mailing list archives and tried
unsuccessfully:
apitest SetDiscoverableTimeout 0
apitest SetMode discoverable
"to make this work you need to set discovto to 0, because otherwise hcid
will automatically switch you device into non-discoverable mode to
protect you." - where do I need to set discovto to 0?
Regards,
Nerijus
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Nerijus Baliunas wrote:
> Hello,
>
> My PDA used to find the device when I had Fedora Core 5, but cannot
> when I upgraded to FC6. hcid.conf is default from FC6 (bluez-utils-3.7-2):
>
> .
> .
> .
>
> hciconfig -a
> hci0: Type: USB
> BD Address: 00:13:46:00:12:CB ACL MTU: 377:10 SCO MTU: 16:0
> UP RUNNING PSCAN ISCAN AUTH ENCRYPT
> RX bytes:8639 acl:0 sco:0 events:249 errors:0
> TX bytes:5296 acl:0 sco:0 commands:202 errors:0
> Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
> Packet type: DM3 DM5 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'xxx-0'
> Class: 0x120104
> Service Classes: Networking, Object Transfer
> Device Class: Computer, Desktop workstation
> HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x309
> Manufacturer: Broadcom Corporation (15)
>
> Any ideas why PDA cannot find the device? I found in mailing list archives and tried
> unsuccessfully:
> apitest SetDiscoverableTimeout 0
> apitest SetMode discoverable
>
> "to make this work you need to set discovto to 0, because otherwise hcid
> will automatically switch you device into non-discoverable mode to
> protect you." - where do I need to set discovto to 0?
I was me having similar problems, but it looks to be with a different
cause, because hciconfig didn't list PSCAN and ISCAN in my case.
Cheers,
Paul.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
OK, it works now - I connected the same bluetooth adapter to another PC, and my Palm
showed its name in Trusted devices list (and so I thought that Palm does not see adapter
connected to my Linux PC). After I tried to connect to it, it changed its name to a correct
one and now it works.
Nerijus
On Tue, 9 Jan 2007 04:04:28 +0200 Nerijus Baliunas <[email protected]> wrote:
> Hello,
>
> found more info - https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=212825
> but running passkey-agent didn't help. I also noticed that even if I change
> class in hcid.conf, hciconfig hci0 down, service bluetooth restart,
> hciconfig -a still displays Class: 0x120100. Why?
> BTW, hcidump -X -V does not display anything when I search for devices from
> my Palm.
>
> Nerijus
>
> On Sat, 30 Dec 2006 02:33:45 +0200 Nerijus Baliunas <[email protected]> wrote:
>
> > Hello,
> >
> > My PDA used to find the device when I had Fedora Core 5, but cannot
> > when I upgraded to FC6. hcid.conf is default from FC6 (bluez-utils-3.7-2):
> >
> > options {
> > autoinit yes;
> > security user;
> > pairing multi;
> > passkey "BlueZ";
> > }
> > device {
> > name "%h-%d";
> > class 0x120104;
> > #pkt_type DH1,DM1,HV1;
> > iscan enable; pscan enable;
> > lm accept;
> > lp rswitch,hold,sniff,park;
> > }
> >
> > I launched bluetooth-properties and selected
> > "Visible and connectable for other devices",
> > "Make adapter invisible after" set to never.
> >
> > hciconfig -a
> > hci0: Type: USB
> > BD Address: 00:13:46:00:12:CB ACL MTU: 377:10 SCO MTU: 16:0
> > UP RUNNING PSCAN ISCAN AUTH ENCRYPT
> > RX bytes:8639 acl:0 sco:0 events:249 errors:0
> > TX bytes:5296 acl:0 sco:0 commands:202 errors:0
> > Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
> > Packet type: DM3 DM5 DH3 DH5 HV1 HV2 HV3
> > Link policy: RSWITCH HOLD SNIFF PARK
> > Link mode: SLAVE ACCEPT
> > Name: 'xxx-0'
> > Class: 0x120104
> > Service Classes: Networking, Object Transfer
> > Device Class: Computer, Desktop workstation
> > HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x309
> > Manufacturer: Broadcom Corporation (15)
> >
> > Any ideas why PDA cannot find the device? I found in mailing list archives and tried
> > unsuccessfully:
> > apitest SetDiscoverableTimeout 0
> > apitest SetMode discoverable
> >
> > "to make this work you need to set discovto to 0, because otherwise hcid
> > will automatically switch you device into non-discoverable mode to
> > protect you." - where do I need to set discovto to 0?
> >
> > Regards,
> > Nerijus
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hello,
found more info - https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=212825
but running passkey-agent didn't help. I also noticed that even if I change
class in hcid.conf, hciconfig hci0 down, service bluetooth restart,
hciconfig -a still displays Class: 0x120100. Why?
BTW, hcidump -X -V does not display anything when I search for devices from
my Palm.
Nerijus
On Sat, 30 Dec 2006 02:33:45 +0200 Nerijus Baliunas <[email protected]> wrote:
> Hello,
>
> My PDA used to find the device when I had Fedora Core 5, but cannot
> when I upgraded to FC6. hcid.conf is default from FC6 (bluez-utils-3.7-2):
>
> options {
> autoinit yes;
> security user;
> pairing multi;
> passkey "BlueZ";
> }
> device {
> name "%h-%d";
> class 0x120104;
> #pkt_type DH1,DM1,HV1;
> iscan enable; pscan enable;
> lm accept;
> lp rswitch,hold,sniff,park;
> }
>
> I launched bluetooth-properties and selected
> "Visible and connectable for other devices",
> "Make adapter invisible after" set to never.
>
> hciconfig -a
> hci0: Type: USB
> BD Address: 00:13:46:00:12:CB ACL MTU: 377:10 SCO MTU: 16:0
> UP RUNNING PSCAN ISCAN AUTH ENCRYPT
> RX bytes:8639 acl:0 sco:0 events:249 errors:0
> TX bytes:5296 acl:0 sco:0 commands:202 errors:0
> Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
> Packet type: DM3 DM5 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'xxx-0'
> Class: 0x120104
> Service Classes: Networking, Object Transfer
> Device Class: Computer, Desktop workstation
> HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x309
> Manufacturer: Broadcom Corporation (15)
>
> Any ideas why PDA cannot find the device? I found in mailing list archives and tried
> unsuccessfully:
> apitest SetDiscoverableTimeout 0
> apitest SetMode discoverable
>
> "to make this work you need to set discovto to 0, because otherwise hcid
> will automatically switch you device into non-discoverable mode to
> protect you." - where do I need to set discovto to 0?
>
> Regards,
> Nerijus
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users