Hi Marcel,
I am sending you info about Logitech diNovo Bluetooth 2.0 EDR dongle
description. You can add it into your list. And BTW is there newer firmware
for it?
hci1: Type: USB
BD Address: 00:07:61:46:8F:98 ACL MTU: 1017:8 SCO MTU: 64:0
UP RUNNING PSCAN
RX bytes:695 acl:0 sco:0 events:23 errors:0
TX bytes:336 acl:0 sco:0 commands:23 errors:0
Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'notas-1'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing, Object Transfer,
Audio
Device Class: Computer, Uncategorized
HCI Ver: 2.0 (0x3) HCI Rev: 0x2000 LMP Ver: 2.0 (0x3) LMP Subver:
0x4147
Manufacturer: Broadcom Corporation (15)
notas:/usr/src/dinovo/bluez-utils-3.9# hciconfig hci1 features
hci1: Type: USB
BD Address: 00:07:61:46:8F:98 ACL MTU: 1017:8 SCO MTU: 64:0
Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<park state> <RSSI> <channel quality> <SCO link> <HV2 packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <power control>
<transparent SCO> <broadcast encrypt> <EDR ACL 2 Mbps>
<EDR ACL 3 Mbps> <enhanced iscan> <interlaced iscan>
<interlaced pscan> <inquiry with RSSI> <extended SCO>
<EV4 packets> <EV5 packets> <AFH cap. slave>
<AFH class. slave> <3-slot EDR ACL> <5-slot EDR ACL>
<AFH cap. master> <AFH class. master> <EDR eSCO 2 Mbps>
<EDR eSCO 3 Mbps> <3-slot EDR eSCO> <extended features>
notas:/usr/src/dinovo/bluez-utils-3.9# hciconfig hci1 revision
hci1: Type: USB
BD Address: 00:07:61:46:8F:98 ACL MTU: 1017:8 SCO MTU: 64:0
Firmware 0.65 / 71
I also got OOPS switching dongle into hci mode. Kernel 2.6.20-mh1:
usb 7-1.2: new full speed USB device using ohci_hcd and address 3
usb 7-1.2: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /class/input/input10
input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on
usb-0000:02:00.1-1.2
usb 7-1.3: new full speed USB device using ohci_hcd and address 4
usb 7-1.3: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /class/input/input11
input,hiddev0: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on
usb-0000:02:00.1-1.3
BUG: at drivers/hid/hid-core.c:785 implement()
[<c027a9c3>] hid_output_report+0x213/0x2be
[<fcaf73fb>] hid_submit_ctrl+0x52/0x1bc [usbhid]
[<fcaf76b9>] usbhid_submit_report+0x154/0x187 [usbhid]
[<fcaf7970>] usbhid_init_reports+0x60/0xbb [usbhid]
[<fcaf917d>] hiddev_ioctl+0x361/0x8e7 [usbhid]
[<c01b4dd1>] avc_has_perm+0x4e/0x58
[<c01b5595>] inode_has_perm+0x5b/0x63
[<c0148652>] __handle_mm_fault+0x2c3/0x7b1
[<c01b5626>] file_has_perm+0x89/0x91
[<c0161158>] do_ioctl+0x4c/0x62
[<c01613aa>] vfs_ioctl+0x23c/0x24f
[<c0161409>] sys_ioctl+0x4c/0x67
[<c0102cc8>] syscall_call+0x7/0xb
[<c02d0033>] __sched_text_start+0x43/0x546
=======================
BUG: at drivers/hid/hid-core.c:785 implement()
[<c027a9c3>] hid_output_report+0x213/0x2be
[<fcaf73fb>] hid_submit_ctrl+0x52/0x1bc [usbhid]
[<fcaf76b9>] usbhid_submit_report+0x154/0x187 [usbhid]
[<fcaf7970>] usbhid_init_reports+0x60/0xbb [usbhid]
[<fcaf917d>] hiddev_ioctl+0x361/0x8e7 [usbhid]
[<c01b4dd1>] avc_has_perm+0x4e/0x58
[<c01b5595>] inode_has_perm+0x5b/0x63
[<c0148652>] __handle_mm_fault+0x2c3/0x7b1
[<c01b5626>] file_has_perm+0x89/0x91
[<c0161158>] do_ioctl+0x4c/0x62
[<c01613aa>] vfs_ioctl+0x23c/0x24f
[<c0161409>] sys_ioctl+0x4c/0x67
[<c0102cc8>] syscall_call+0x7/0xb
[<c02d0033>] __sched_text_start+0x43/0x546
=======================
BUG: at drivers/hid/hid-core.c:785 implement()
[<c027a9c3>] hid_output_report+0x213/0x2be
[<fcaf73fb>] hid_submit_ctrl+0x52/0x1bc [usbhid]
[<fcaf76b9>] usbhid_submit_report+0x154/0x187 [usbhid]
[<fcaf7970>] usbhid_init_reports+0x60/0xbb [usbhid]
[<fcaf917d>] hiddev_ioctl+0x361/0x8e7 [usbhid]
[<c01b4dd1>] avc_has_perm+0x4e/0x58
[<c01b5595>] inode_has_perm+0x5b/0x63
[<c0148652>] __handle_mm_fault+0x2c3/0x7b1
[<c01b5626>] file_has_perm+0x89/0x91
[<c0161158>] do_ioctl+0x4c/0x62
[<c01613aa>] vfs_ioctl+0x23c/0x24f
[<c0161409>] sys_ioctl+0x4c/0x67
[<c0102cc8>] syscall_call+0x7/0xb
[<c02d0033>] __sched_text_start+0x43/0x546
=======================
BUG: at drivers/hid/hid-core.c:785 implement()
[<c027a9c3>] hid_output_report+0x213/0x2be
[<fcaf73fb>] hid_submit_ctrl+0x52/0x1bc [usbhid]
[<fcaf76b9>] usbhid_submit_report+0x154/0x187 [usbhid]
[<fcaf917d>] hiddev_ioctl+0x361/0x8e7 [usbhid]
[<c01b4dd1>] avc_has_perm+0x4e/0x58
[<c01b5595>] inode_has_perm+0x5b/0x63
[<c0148652>] __handle_mm_fault+0x2c3/0x7b1
[<c01b5626>] file_has_perm+0x89/0x91
[<c0161158>] do_ioctl+0x4c/0x62
[<c01613aa>] vfs_ioctl+0x23c/0x24f
[<c0161409>] sys_ioctl+0x4c/0x67
[<c0102cc8>] syscall_call+0x7/0xb
[<c02d0033>] __sched_text_start+0x43/0x546
=======================
BUG: at drivers/hid/hid-core.c:785 implement()
[<c027a9c3>] hid_output_report+0x213/0x2be
[<fcaf73fb>] hid_submit_ctrl+0x52/0x1bc [usbhid]
[<fcaf76b9>] usbhid_submit_report+0x154/0x187 [usbhid]
[<fcaf917d>] hiddev_ioctl+0x361/0x8e7 [usbhid]
[<c01b4dd1>] avc_has_perm+0x4e/0x58
[<c01b5595>] inode_has_perm+0x5b/0x63
[<c0148652>] __handle_mm_fault+0x2c3/0x7b1
[<c01b5626>] file_has_perm+0x89/0x91
[<c0161158>] do_ioctl+0x4c/0x62
[<c01613aa>] vfs_ioctl+0x23c/0x24f
[<c0161409>] sys_ioctl+0x4c/0x67
[<c0102cc8>] syscall_call+0x7/0xb
[<c02d0033>] __sched_text_start+0x43/0x546
=======================
BUG: at drivers/hid/hid-core.c:785 implement()
[<c027a9c3>] hid_output_report+0x213/0x2be
[<c011bfb6>] irq_exit+0x25/0x30
[<c0105190>] do_IRQ+0x87/0x9b
[<fcaf73fb>] hid_submit_ctrl+0x52/0x1bc [usbhid]
[<fcaf76b9>] usbhid_submit_report+0x154/0x187 [usbhid]
[<c0127f9f>] autoremove_wake_function+0x0/0x35
[<fcaf917d>] hiddev_ioctl+0x361/0x8e7 [usbhid]
[<c01b4dd1>] avc_has_perm+0x4e/0x58
[<c01b5595>] inode_has_perm+0x5b/0x63
[<c0148652>] __handle_mm_fault+0x2c3/0x7b1
[<c01b5626>] file_has_perm+0x89/0x91
[<c0161158>] do_ioctl+0x4c/0x62
[<c01613aa>] vfs_ioctl+0x23c/0x24f
[<c0161409>] sys_ioctl+0x4c/0x67
[<c0102cc8>] syscall_call+0x7/0xb
[<c02d0033>] __sched_text_start+0x43/0x546
=======================
BUG: at drivers/hid/hid-core.c:785 implement()
[<c027a9c3>] hid_output_report+0x213/0x2be
[<c011bfb6>] irq_exit+0x25/0x30
[<c0105190>] do_IRQ+0x87/0x9b
[<fcaf73fb>] hid_submit_ctrl+0x52/0x1bc [usbhid]
[<fcaf76b9>] usbhid_submit_report+0x154/0x187 [usbhid]
[<c0127f9f>] autoremove_wake_function+0x0/0x35
[<fcaf917d>] hiddev_ioctl+0x361/0x8e7 [usbhid]
[<c01b4dd1>] avc_has_perm+0x4e/0x58
[<c01b5595>] inode_has_perm+0x5b/0x63
[<c0148652>] __handle_mm_fault+0x2c3/0x7b1
[<c01b5626>] file_has_perm+0x89/0x91
[<c0161158>] do_ioctl+0x4c/0x62
[<c01613aa>] vfs_ioctl+0x23c/0x24f
[<c0161409>] sys_ioctl+0x4c/0x67
[<c0102cc8>] syscall_call+0x7/0xb
[<c02d0033>] __sched_text_start+0x43/0x546
=======================
BUG: at drivers/hid/hid-core.c:785 implement()
[<c027a9c3>] hid_output_report+0x213/0x2be
[<c011bfb6>] irq_exit+0x25/0x30
[<c0105190>] do_IRQ+0x87/0x9b
[<fcaf73fb>] hid_submit_ctrl+0x52/0x1bc [usbhid]
[<fcaf76b9>] usbhid_submit_report+0x154/0x187 [usbhid]
[<c0127f9f>] autoremove_wake_function+0x0/0x35
[<fcaf917d>] hiddev_ioctl+0x361/0x8e7 [usbhid]
[<c01b4dd1>] avc_has_perm+0x4e/0x58
[<c01b5595>] inode_has_perm+0x5b/0x63
[<c0148652>] __handle_mm_fault+0x2c3/0x7b1
[<c01b5626>] file_has_perm+0x89/0x91
[<c0161158>] do_ioctl+0x4c/0x62
[<c01613aa>] vfs_ioctl+0x23c/0x24f
[<c0161409>] sys_ioctl+0x4c/0x67
[<c0102cc8>] syscall_call+0x7/0xb
[<c02d0033>] __sched_text_start+0x43/0x546
=======================
usb 7-1.1: new full speed USB device using ohci_hcd and address 5
usb 7-1.1: configuration #1 chosen from 1 choice
Best regards
Michal
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users