I bought a HP Bluetooth PC Card Mouse. It works when I press the connect
button underneath the mouse, and hidd -c adress. This is ok for the first
time using it, but I have to press the button every time i am using it. This
is bothersome. Is there a possibility to avoid this procedure? I am using a
Dell Latitude D620 with OpenSuSE 10.2 operating system.
Thanks for any help
Thilo
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Finally I found the solution myself (with help from the post: "hidd connection
to mouse interferes with headset"). I start the hidd now with the argumets:
--connect 00:02:76:00:D0:3E --master
I put it in the /etc/sysconfig/bluetooth file in the variable: HID_DAEMON_ARGS
This gives the desired behavior. When I switch the mouse on and activate it by
a click on one of the buttons, it starts to work after a few seconds.
Thilo
Am Montag, 18. Juni 2007 11:48 schrieb Thilo:
> I bought a HP Bluetooth PC Card Mouse. It works when I press the connect
> button underneath the mouse, and hidd -c adress. This is ok for the first
> time using it, but I have to press the button every time i am using it.
> This is bothersome. Is there a possibility to avoid this procedure? I am
> using a Dell Latitude D620 with OpenSuSE 10.2 operating system.
> Thanks for any help
>
> Thilo
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
After I got no response so far, I try again with some additional informatio=
n. =
The "hidd --server" process running in the background detects the the mouse =
when it gets switched on again (after a powersave or off mode) and produces =
the line:
############################################################################
hidd[28927]: New HID device 00:02:76:00:D0:3E (Broadcom Four Button Mouse)
input: Bluetooth HID Boot Protocol Device as /class/input/input15
############################################################################
in syslog. =
also an "hidd show" gives:
############################################################################
00:02:76:00:D0:3E Bluetooth HID Boot Protocol Device [0a5c:2004] connected =
[boot-protocol]
############################################################################
So the mouse is obviously detected and somehow connected. But the LED is of=
f, =
and the mouse pointer does not react on movements.
I should mention, that directly after turning the mouse on, the laser LED =
turns on for less than an second and than off again. The mouse is than not =
yet discovered by the notebook. I have to press a mouse button first, and =
than after a second, the above mentioned logs appear.
So what last bit is missing, to get it work again without making the annoyi=
ng =
procedure with the connect button.
Am Montag, 18. Juni 2007 11:48 schrieb Thilo Riessner:
> I bought a HP Bluetooth PC Card Mouse. It works when I press the connect
> button underneath the mouse, and hidd -c adress. This is ok for the first
> time using it, but I have to press the button every time i am using it.
> This is bothersome. Is there a possibility to avoid this procedure? I am
> using a Dell Latitude D620 with OpenSuSE 10.2 operating system.
> Thanks for any help
>
> Thilo
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
-- =
----------------------------------------------------
|Rie=DFner Gase GmbH & Co. KG |
|Rudolf-Diesel-Stra=DFe 5 |
|96215 Lichtenfels |
|Telefon: 0049 (0) 9571 / 765 - 0 |
|Telefax: 0049 (0) 9571 / 765 - 67 |
|Komplement=E4rin: Rie=DFner-Gase Beteiligungs-GmbH |
|Sitz: Lichtenfels |
|Registergericht Coburg HRB 2616 |
|Registergericht Coburg HRA 3533 |
|Gesch=E4ftsf=FChrer: Dipl.-Ing. Dr. Rolf Rie=DFner, |
| Dr. Thilo Rie=DFner |
|Umsatzsteuernummer: 173/06405 |
|Umsatz-IdNr.: DE 812 175 462 |
----------------------------------------------------
-----------------------------------------------------------------------
|Diese E-Mail (ggf. nebst Anhang) enth=E4lt vertrauliche und/oder |
|rechtlich gesch=FCtzte Informationen. Wenn Sie nicht der richtige |
|Adressat sind, oder diese E-Mail irrt=FCmlich erhalten haben, |
|informieren |Sie bitte sofort den Absender und vernichten Sie |
|diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe |
|dieser Mail ist nicht gestattet. |
|---------------------------------------------------------------------|
|This e-mail (and any attachment/s) contains confidential and/or |
|privileged information. If you are not the intended recipient |
|(or have received this e-mail in error) please notify the sender |
|immediately and destroy this e-mail. Any unauthorised copying, |
|disclosure or distribution of the material in this e-mail is |
|strictly forbidden. |
-----------------------------------------------------------------------
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users