List,
I have a USB dongle connected to my desktop. "hciconfig hci0 up" returns "can't open HCI socket.:Address family not supported by protocol".
For serial port, run "hciattach /dev/ttyS1 bcsp 115200". But my dongle is self initialized with its own eeprom with USB port.
What should I do to setup my dongle and make it work with my cell phone?
---henry
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel,
Yes, it does not complain after loading hci_usb.
Where can I get howto document to do send/receive picture, voice, etc. with other bluetooth device?
I google but do not get good information.
---henry
--- On Wed, 8/20/08, Marcel Holtmann <[email protected]> wrote:
> From: Marcel Holtmann <[email protected]>
> Subject: Re: [Bluez-users] should I use hciattach for my USB dongle?
> To: [email protected], "BlueZ users" <[email protected]>
> Date: Wednesday, August 20, 2008, 5:18 AM
> Hi,
>
> > I have a USB dongle connected to my desktop.
> "hciconfig hci0 up" returns "can't open
> HCI socket.:Address family not supported by protocol".
> >
> > For serial port, run "hciattach /dev/ttyS1 bcsp
> 115200". But my dongle is self initialized with its own
> eeprom with USB port.
> >
> > What should I do to setup my dongle and make it work
> with my cell phone?
>
> either the hci_usb or btusb driver will be used. Make sure
> that all
> modules are loaded.
>
> Regards
>
> Marcel
Hi,
> I have a USB dongle connected to my desktop. "hciconfig hci0 up" returns "can't open HCI socket.:Address family not supported by protocol".
>
> For serial port, run "hciattach /dev/ttyS1 bcsp 115200". But my dongle is self initialized with its own eeprom with USB port.
>
> What should I do to setup my dongle and make it work with my cell phone?
either the hci_usb or btusb driver will be used. Make sure that all
modules are loaded.
Regards
Marcel
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users