Hi *,
I have a problem with Belkin Bluetooth USB adapter based on BCM203x
chip. When I plug this dongle into USB port, kernel returns:
Bluetooth: Broadcom Blutonium firmware driver ver 1.0
bcm203x_probe: Mini driver request failed
bcm203x: probe of 2-1:1.0 failed with error -5
usbcore: registered new driver bcm203x
I am using :
# cat /proc/versions
Linux version 2.6.9-9-amd64-k8 ([email protected]) (gcc
version 3.4.2 (Debian 3.4.2-3)) #1 Wed Nov 10 19:02:19 CET 2004
#lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0282
0000:00:00.1 Host bridge: VIA Technologies, Inc.: Unknown device 1282
0000:00:00.2 Host bridge: VIA Technologies, Inc.: Unknown device 2282
0000:00:00.3 Host bridge: VIA Technologies, Inc.: Unknown device 3282
0000:00:00.4 Host bridge: VIA Technologies, Inc.: Unknown device 4282
0000:00:00.7 Host bridge: VIA Technologies, Inc.: Unknown device 7282
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800 South]
0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. Yukon
Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
0000:00:0c.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus
Reference Card (rev 01)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA
RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[K8T800 South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: nVidia Corporation NV18
[GeForce4 MX 440 AGP 8x] (rev c1)
The same configuration is working for me on other hardware very well.
Could you have a look please ? Thank you.
Vladimir
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann wrote:
>Hi Vladimir,
>
>
>
>>I have a problem with Belkin Bluetooth USB adapter based on BCM203x
>>chip. When I plug this dongle into USB port, kernel returns:
>>
>>Bluetooth: Broadcom Blutonium firmware driver ver 1.0
>>bcm203x_probe: Mini driver request failed
>>bcm203x: probe of 2-1:1.0 failed with error -5
>>usbcore: registered new driver bcm203x
>>
>>
>
>you must make sure that the firmware files are installed. On a Debian
>System is should be enough to install the bluez-firmware package.
>
>Regards
>
>Marcel
>
>
>
>
Hi Marcel,
thank you very much! Now it is working.
Vladimir
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Vladimir,
> I have a problem with Belkin Bluetooth USB adapter based on BCM203x
> chip. When I plug this dongle into USB port, kernel returns:
>
> Bluetooth: Broadcom Blutonium firmware driver ver 1.0
> bcm203x_probe: Mini driver request failed
> bcm203x: probe of 2-1:1.0 failed with error -5
> usbcore: registered new driver bcm203x
you must make sure that the firmware files are installed. On a Debian
System is should be enough to install the bluez-firmware package.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users