Hi
Trying to connect my mobile phone and PC using blue tooth.
1.Added needed stuff in my kernel 2.6.11 on gentoo box.
When I plug inn my Dlink DBT-120 lights are ON and hcitools scan reports
this:
Scanning ...
00:01:E3:3C:79:45 Bash
where bash is my mobile phone.
and link quality is -->hcitool lq 00:01:E3:3C:79:45
Link quality: 255
Does this means that blue tooth works?
2.How do I connect to devices?
3. What tools can use for file transfer ?
Thanks
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi all
Lets try again ...
I have fully working bluetooth setup except
when I try to send files to my Siemens S65 with obexftp
It asks to type in pass for Bluez(0) and no mather what I type
it just not giving me access.
Pass in /etc/bluetooth/pin is 12345 and phonecode is the same.
Here is the out put what happends when I run :
/usr/local/bin/obexftp -b 00:01:E3:3C:79:45 -B 5 -p wireless_script
Browsing 00:01:E3:3C:79:45 ...
Channel: 5
No custom transport
Connecting...bt: -1
failed: connect
Still trying to connect
Connecting...bt: -1
failed: connect
Still trying to connect
Connecting...bt: -1
failed: connect
Still trying to connect
After 3 tryes it stops.
Here is my hcdi.conf
# HCI daemon configuration file.
#
# $Id: hcid.conf,v 1.4 2004/04/29 20:14:21 holtmann Exp $
#
# HCId options
options {
# Automatically initialize new devices
autoinit yes;
# Security Manager mode
# none - Security manager disabled
# auto - Use local PIN for incoming connections
# user - Always ask user for a PIN
#
security user;
# Pairing mode
# none - Pairing disabled
# multi - Allow pairing with already paired devices
# once - Pair once and deny successive attempts
pairing multi; # PIN helper
pin_helper /usr/bin/bluepin;
# D-Bus PIN helper
#dbus_pin_helper;
}
# Default settings for HCI devices
device {
# Local device name
# %d - device id
# %h - host name
name "BlueZ (%d)";
# Local device class
class 0x100;
# Default packet type
#pkt_type DH1,DM1,HV1;
# Inquiry and Page scan
iscan enable; pscan enable;
# Default link mode
# none - no specific policy
# accept - always accept incoming connections
# master - become master on incoming connections,
# deny role switch on outgoing connections
#
#lm accept,master;
#
lm accept;
# Default link policy
# none - no specific policy
# rswitch - allow role switch
# hold - allow hold mode
# sniff - allow sniff mode
# park - allow park mode
#
#lp hold,sniff;
#
lp rswitch,hold,sniff,park;
# Authentication and Encryption
#auth enable;
#encrypt enable;
}
------------------------------------------------------------------------------------------------------------
And this is my pin >>>> 12345
-----------------------------------------------------------------------------------------------------------
pin-helper file has this stuff
#!/bin/sh
echo -n "PIN:"
cat /etc/bluetooth/pin
----------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------
And finaly rfcomm.conf
#
# RFCOMM configuration file.
#
# $Id: rfcomm.conf,v 1.1 2002/10/07 05:58:18 maxk Exp $
#
rfcomm0 {
# Automatically bind the device at startup
bind no;
# Bluetooth address of the device
device 11:22:33:44:55:66;
# RFCOMM channel for the connection
channel 1;
# Description of the connection
comment "Example Bluetooth device";
}
-----------------------------------------------------------------------------------------------
Need to get pass that password issue ....
Thanks
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Adis Beglerovic escribi=F3:
> Hi
> Trying to connect my mobile phone and PC using blue tooth.
>=20
> 1.Added needed stuff in my kernel 2.6.11 on gentoo box.
> When I plug inn my Dlink DBT-120 lights are ON and hcitools scan report=
s
> this:
> Scanning ...
> 00:01:E3:3C:79:45 Bash
> where bash is my mobile phone.
> and link quality is -->hcitool lq 00:01:E3:3C:79:45
> Link quality: 255
>=20
> Does this means that blue tooth works?
> 2.How do I connect to devices?
> 3. What tools can use for file transfer ?
see this link [http://el-directorio.org/index.php?title=3DT610:Transferen=
cia_de_Archivos] (is in=20
spanish but can help you) and you can compare your hcid.conf whit it:
options {
autoinit yes;
security auto;
pairing multi;
pin_helper /usr/bin/bluez-pin;
}
device {
name "%h-%d";
class 0x100;
iscan enable;
pscan enable;
lm accept;
lp rswitch,hold,sniff,park;
#encrypt enable;
}
> Thanks
>=20
>=20
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users=
.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>=20
--=20
Suerte and F.S.Fv.
ATT: Fredy P.
___________________________________________________
F.S.Fv. es acr=F3nimo de Free Software Forever
http://www.fsf.org/philosophy/free-sw.es.html
Normas b=E1sicas de comportamiento en el ciberespacio
http://www.netiqueta.org/
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Finaly I got great results with modules in kernel and now
hcicionfig -a shows this:
hciconfig -a
hci0: Type: USB
BD Address: 00:11:95:6F:DE:D1 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:1754 acl:38 sco:0 events:80 errors:0
TX bytes:1007 acl:34 sco:0 commands:29 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
Manufacturer: Cambridge Silicon Radio (10)
But when I try to use obexftp I get to the part where it asks for pass
and pass is not good.
Where do I look for pass ? In /etc/bluetooth/pin ?
Thanks
On Sun, 06 Mar 2005 15:19:50 +0100, Marcel Holtmann <[email protected]> wrote:
> Hi Adis,
>
> > Was following this howto http://gentoo-wiki.com/HOWTO_The_host-to-host_Bluetooth
> > and stuff that was added are as following:Device Drivers --->
> > Networking Support --->
> > <*> Bluetooth subsystem support --->
> > <*> L2CAP protocol support
> > <*> SCO links support
> > <*> RFCOMM protocol support
> > [*] RFCOMM TTY support
> > <*> BNEP protocol support
> > [*] Multicast filter support
> > [*] Protocol filter support
> > Bluetooth device drivers --->
> > <*> HCI USB driver
> > [*] SCO (voice) support
> > USB support --->
> > <*> Support for Host-side USB
> > --- USB Host Controller Drivers
> > <M> EHCI HCD (USB 2.0) support
> > <M> OHCI HCD support
> > <*> UHCI HCD (most Intel and VIA) support
> > --- USB Device Class drivers
> > <*> USB Audio support
> >
> > Please tell me if this is wrong and.
> > You are also suggesting modules? Which one as a module ?
> > Can you point me to a howto that explains it ?
>
> I never checked again, if Bluetooth built-in is still working. Most
> people are using a full modular kernel and this includes Bluetooth as
> well as USB.
>
> Regards
>
> Marcel
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Adis,
> Was following this howto http://gentoo-wiki.com/HOWTO_The_host-to-host_Bluetooth
> and stuff that was added are as following:Device Drivers --->
> Networking Support --->
> <*> Bluetooth subsystem support --->
> <*> L2CAP protocol support
> <*> SCO links support
> <*> RFCOMM protocol support
> [*] RFCOMM TTY support
> <*> BNEP protocol support
> [*] Multicast filter support
> [*] Protocol filter support
> Bluetooth device drivers --->
> <*> HCI USB driver
> [*] SCO (voice) support
> USB support --->
> <*> Support for Host-side USB
> --- USB Host Controller Drivers
> <M> EHCI HCD (USB 2.0) support
> <M> OHCI HCD support
> <*> UHCI HCD (most Intel and VIA) support
> --- USB Device Class drivers
> <*> USB Audio support
>
> Please tell me if this is wrong and.
> You are also suggesting modules? Which one as a module ?
> Can you point me to a howto that explains it ?
I never checked again, if Bluetooth built-in is still working. Most
people are using a full modular kernel and this includes Bluetooth as
well as USB.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Was following this howto http://gentoo-wiki.com/HOWTO_The_host-to-host_Bluetooth
and stuff that was added are as following:Device Drivers --->
Networking Support --->
<*> Bluetooth subsystem support --->
<*> L2CAP protocol support
<*> SCO links support
<*> RFCOMM protocol support
[*] RFCOMM TTY support
<*> BNEP protocol support
[*] Multicast filter support
[*] Protocol filter support
Bluetooth device drivers --->
<*> HCI USB driver
[*] SCO (voice) support
USB support --->
<*> Support for Host-side USB
--- USB Host Controller Drivers
<M> EHCI HCD (USB 2.0) support
<M> OHCI HCD support
<*> UHCI HCD (most Intel and VIA) support
--- USB Device Class drivers
<*> USB Audio support
Please tell me if this is wrong and.
You are also suggesting modules? Which one as a module ?
Can you point me to a howto that explains it ?
Thanks
On Sun, 06 Mar 2005 15:05:12 +0100, Marcel Holtmann <[email protected]> wrote:
> Hi Adis,
>
> > Just checkign stuff that was in kernel and everything seams OK.
> > I don't use modules everything is build inn!
> > Also when I start bluetooth I get :
> >
> > /etc/init.d/bluetooth start
> > * Starting Bluetooth...
> > * Starting hcid... [ ok ]
> > * Starting sdpd... [ ok ]
> > * Starting rfcomm...
> > Can't open RFCOMM control socket: Address family not supported by protoc [ !! ]
>
> make sure everything is compiled in correctly. Otherwise use modules.
>
> Regards
>
> Marcel
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Adis,
> Just checkign stuff that was in kernel and everything seams OK.
> I don't use modules everything is build inn!
> Also when I start bluetooth I get :
>
> /etc/init.d/bluetooth start
> * Starting Bluetooth...
> * Starting hcid... [ ok ]
> * Starting sdpd... [ ok ]
> * Starting rfcomm...
> Can't open RFCOMM control socket: Address family not supported by protoc [ !! ]
make sure everything is compiled in correctly. Otherwise use modules.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Thanks for fast answers
Just checkign stuff that was in kernel and everything seams OK.
I don't use modules everything is build inn!
Also when I start bluetooth I get :
/etc/init.d/bluetooth start
* Starting Bluetooth...
* Starting hcid... [ ok ]
* Starting sdpd... [ ok ]
* Starting rfcomm...
Can't open RFCOMM control socket: Address family not supported by protoc [ !! ]
On Sun, 06 Mar 2005 14:55:08 +0100, Marcel Holtmann <[email protected]> wrote:
> Hi Adis,
>
> > Well I get this output when I run hciconfig -a
> >
> > Can't open HCI socket.: Address family not supported by protocol
> > What can I do to make that work?
>
> are you sure that the kernel modules bluetooth.ko and hci_usb.ko are
> loaded?
>
> > Regarding KDE and GNOME.. I don't use any of them.
> > Is there a nice command tool for that? Tryed obexftp
> > but with no luck.
>
> The latest version of obexftp and an OpenOBEX library with Bluetooth
> support should work.
>
> Regards
>
> Marcel
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Adis,
> Well I get this output when I run hciconfig -a
>
> Can't open HCI socket.: Address family not supported by protocol
> What can I do to make that work?
are you sure that the kernel modules bluetooth.ko and hci_usb.ko are
loaded?
> Regarding KDE and GNOME.. I don't use any of them.
> Is there a nice command tool for that? Tryed obexftp
> but with no luck.
The latest version of obexftp and an OpenOBEX library with Bluetooth
support should work.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Well I get this output when I run hciconfig -a
Can't open HCI socket.: Address family not supported by protocol
What can I do to make that work?
Regarding KDE and GNOME.. I don't use any of them.
Is there a nice command tool for that? Tryed obexftp
but with no luck.
Thanks
On Sun, 06 Mar 2005 13:15:50 +0100, Marcel Holtmann <[email protected]> wrote:
> Hi Adis,
>
> > Trying to connect my mobile phone and PC using blue tooth.
> >
> > 1.Added needed stuff in my kernel 2.6.11 on gentoo box.
> > When I plug inn my Dlink DBT-120 lights are ON and hcitools scan reports
> > this:
> > Scanning ...
> > 00:01:E3:3C:79:45 Bash
> > where bash is my mobile phone.
> > and link quality is -->hcitool lq 00:01:E3:3C:79:45
> > Link quality: 255
> >
> > Does this means that blue tooth works?
>
> if "hciconfig -a" doesn't show any errors it is working.
>
> > 2.How do I connect to devices?
>
> This depends on what you wanna do, but in general you will setup a
> RFCOMM connection with the "rfcomm" tool.
>
> > 3. What tools can use for file transfer ?
>
> The Gnome desktop and also KDE have some nice Bluetooth integration that
> allows you to send and receive files.
>
> Regards
>
> Marcel
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Adis,
> Trying to connect my mobile phone and PC using blue tooth.
>
> 1.Added needed stuff in my kernel 2.6.11 on gentoo box.
> When I plug inn my Dlink DBT-120 lights are ON and hcitools scan reports
> this:
> Scanning ...
> 00:01:E3:3C:79:45 Bash
> where bash is my mobile phone.
> and link quality is -->hcitool lq 00:01:E3:3C:79:45
> Link quality: 255
>
> Does this means that blue tooth works?
if "hciconfig -a" doesn't show any errors it is working.
> 2.How do I connect to devices?
This depends on what you wanna do, but in general you will setup a
RFCOMM connection with the "rfcomm" tool.
> 3. What tools can use for file transfer ?
The Gnome desktop and also KDE have some nice Bluetooth integration that
allows you to send and receive files.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users