LinuxLists.cc - [Bluez-users] Problems fooling my S100 into using Bluez as a modem

2007-01-16 19:10:39

Subject: [Bluez-users] Problems fooling my S100 into using Bluez as a modem

Paul Gardiner wrote:
> Paul Gardiner wrote:
> No chance someone can have a quick look at the three
> traces? (should be the messages that appear at the
> same level in this thread as this message)
>
> I know its a lot to ask, but I so much want to have
> this working again, and there's no way forward
> without help.

That'll be a no then, I guess. :-(

Anyway, here's another strange thing that might
be an indicator of what's wrong: ps alx shows me

/usr/bin/dund --listen --persist --msdun call dun

suggesting that dund is running and happy, but

sdp://localhost lists

Obex Push Server
KBSerialChat
KDE Bemused
LAN Access Point

and that's it. No Dial Up Networking. Why would
that be?

Cheers,
Paul.

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

2007-01-20 08:14:15

by Paul Gardiner

[permalink] [raw]

Subject: Re: [Bluez-users] Problems fooling my S100 into using Bluez as a modem (Solved)

Paul Gardiner wrote:
> Paul Gardiner wrote:
>> Paul Gardiner wrote:
>> Anyway, here's another strange thing that might
>> be an indicator of what's wrong: ps alx shows me
>>
>> /usr/bin/dund --listen --persist --msdun call dun
>>
>>
>> suggesting that dund is running and happy, but
>>
>> sdp://localhost lists
>>
>> Obex Push Server
>> KBSerialChat
>> KDE Bemused
>> LAN Access Point
>>
>> and that's it. No Dial Up Networking. Why would
>> that be?

All that was needed was to supply dund with the --dialup
option in place of the --listen option. All works
perfectly again now.

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

2007-01-18 13:13:09

by Paul Gardiner

[permalink] [raw]

Subject: Re: [Bluez-users] Problems fooling my S100 into using Bluez as a modem

Paul Gardiner wrote:
> Paul Gardiner wrote:
> > Paul Gardiner wrote:
> > No chance someone can have a quick look at the three
> > traces? (should be the messages that appear at the
> > same level in this thread as this message)
> >
> > I know its a lot to ask, but I so much want to have
> > this working again, and there's no way forward
> > without help.
>
> That'll be a no then, I guess. :-(
>
> Anyway, here's another strange thing that might
> be an indicator of what's wrong: ps alx shows me
>
> /usr/bin/dund --listen --persist --msdun call dun
>
>
> suggesting that dund is running and happy, but
>
> sdp://localhost lists
>
> Obex Push Server
> KBSerialChat
> KDE Bemused
> LAN Access Point
>
> and that's it. No Dial Up Networking. Why would
> that be?

Just a suggestion as to what I should check next, maybe?

Or is the general consensus that I should give up? (although
this all worked fine with an earlier version of bluez).

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

2007-01-10 18:24:25

by Paul Gardiner

[permalink] [raw]

Subject: Re: [Bluez-users] Problems fooling my S100 into using Bluez as a modem

Paul Gardiner wrote:
> Marcel Holtmann wrote:
>> Check /sys/class/bluetooth/rfcomm that you really have a listening
>> RFCOMM socket on the right channel after starting dund.
>
> How do I check this? In that directory I have "hci0", which is a soft
> link, and three other files "l2cap", "rfcomm", "rfcomm_dlc". How
> do I check they are correct?
>
> Also, I have to own up to something silly: when some of your
> statements seemed to imply that most of this should work
> without special configuration, I put the original config
> files in place, but didn't notice that dund was off by
> default. I'll post some new dumps with that corrected.

No chance someone can have a quick look at the three
traces? (should be the messages that appear at the
same level in this thread as this message)

I know its a lot to ask, but I so much want to have
this working again, and there's no way forward
without help.

Cheers,
Paul.

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

2007-01-03 11:42:06

by Paul Gardiner

[permalink] [raw]

Subject: Re: [Bluez-users] Problems fooling my S100 into using Bluez as a modem

2007-01-03 11:39:57

by Paul Gardiner

[permalink] [raw]

Subject: Re: [Bluez-users] Problems fooling my S100 into using Bluez as a modem

Paul Gardiner wrote:
> Also, I have to own up to something silly: when some of your
> statements seemed to imply that most of this should work
> without special configuration, I put the original config
> files in place, but didn't notice that dund was off by
> default. I'll post some new dumps with that corrected.

This is a second dump of my S100 discovering Bluez, this
time after issuing the command

sdptool add DUN

After this, the S100 will attempt to use my server as
a modem:

HCI sniffer - Bluetooth packet analyzer ver 1.33
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Inquiry (0x01|0x0001) plen 5
lap 0x9e8b33 len 6 num 0
> HCI Event: Command Status (0x0f) plen 4
Inquiry (0x01|0x0001) status 0x00 ncmd 1
> HCI Event: Inquiry Complete (0x01) plen 1
status 0x00
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:09:2D:08:BC:57 class 0x100114 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:09:2D:08:BC:57 role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 42 bdaddr 00:09:2D:08:BC:57 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 42
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:09:2D:08:BC:57 mode 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
> HCI Event: Max Slots Change (0x1b) plen 3
handle 42 slots 5
> HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 42 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 42
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 42 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 42
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:09:2D:08:BC:57 mode 2 clkoffset 0x0000
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
status 0x00 handle 42 ptype 0xff1e
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2-DH1 2-DH3 2-DH5 3-DH1 3-DH3
3-DH5
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:09:2D:08:BC:57 name 'Pocket_PC2'
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:09:2D:08:BC:57
< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
bdaddr 00:09:2D:08:BC:57 len 4 pin '6969'
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Reply (0x01|0x000d) ncmd 1
status 0x00 bdaddr 00:09:2D:08:BC:57
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 00:09:2D:08:BC:57 key 0B9ACB6B85E27429E31F00CA81593DAA type 0
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 42 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:09:2D:08:BC:57 class 0x100114 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:09:2D:08:BC:57 role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 43 bdaddr 00:09:2D:08:BC:57 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 43
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:09:2D:08:BC:57 mode 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
> HCI Event: Max Slots Change (0x1b) plen 3
handle 43 slots 5
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x005a
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x005a result 0 status 0
Connection successful
> HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 43 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 43
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 43 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:09:2D:08:BC:57 mode 2 clkoffset 0x0000
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
status 0x00 handle 43 ptype 0xff1e
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2-DH1 2-DH3 2-DH5 3-DH1 3-DH3
3-DH5
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x005a flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x005a flags 0x00 clen 0
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 43
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:09:2D:08:BC:57 name 'Pocket_PC2'
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 00001108-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x005a len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x005a
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x005a
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x005b
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x005b result 0 status 0
Connection successful
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x005b flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x005b flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 0000111e-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x005b len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x005b
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x005b
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x005c
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x005c result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x005c flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x005c flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 00001103-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 96
L2CAP(d): cid 0x005c len 92 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x57
count 84
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10004
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1103 (DUN) uuid-16 0x1201 (Networking) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x2 > >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1103 (DUN) uint 0x100 > >
aid 0x0100 (SrvName)
str "Dial-Up Networking"
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x005c
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x005c
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x005d
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x005d result 0 status 0
Connection successful
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x005d flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x005d flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 00001101-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 234
L2CAP(d): cid 0x005d len 230 [psm 1]
SDP SSA Rsp: tid 0x0 len 0xe1
count 222
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10002
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1101 (SP) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x5 > >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x0100 (SrvName)
str "KBtSerialChat"
aid 0x0101 (SrvDesc)
str "KDE Bluetooth Serial Chat Service"
record #1
aid 0x0000 (SrvRecHndl)
uint 0x10003
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1101 (SP) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1b > >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x0100 (SrvName)
str "KDE Bemused Server"
aid 0x0101 (SrvDesc)
str "KDE Server for the Bemused remote control protocol"
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x005d
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x005d
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x005e
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x005e result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x005e flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x005e flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 0350278f-3dca-4e62-831d-a41165ff906c
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x005e len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x005e
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x005e
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 43 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 43 reason 0x16
Reason: Connection Terminated by Local Host

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

2007-01-03 11:37:09

by Paul Gardiner

[permalink] [raw]

Subject: Re: [Bluez-users] Problems fooling my S100 into using Bluez as a modem

Paul Gardiner wrote:
> Also, I have to own up to something silly: when some of your
> statements seemed to imply that most of this should work
> without special configuration, I put the original config
> files in place, but didn't notice that dund was off by
> default. I'll post some new dumps with that corrected.

This is the dump of my S100 discovering Bluez. This is
without a preceding call to "sdptool add DUN", and
although the device is discovered, the S100 then
refuses to use it as a modem:

HCI sniffer - Bluetooth packet analyzer ver 1.33
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:09:2D:08:BC:57 class 0x100114 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:09:2D:08:BC:57 role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 42 bdaddr 00:09:2D:08:BC:57 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 42
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:09:2D:08:BC:57 mode 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 42 slots 5
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
> HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 42 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 42
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 42 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:09:2D:08:BC:57 mode 2 clkoffset 0x0000
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
status 0x00 handle 42 ptype 0xff1e
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2-DH1 2-DH3 2-DH5 3-DH1 3-DH3
3-DH5
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 42
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:09:2D:08:BC:57 name 'Pocket_PC2'
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:09:2D:08:BC:57
< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
bdaddr 00:09:2D:08:BC:57 len 4 pin '6969'
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Reply (0x01|0x000d) ncmd 1
status 0x00 bdaddr 00:09:2D:08:BC:57
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 00:09:2D:08:BC:57 key 8293311B9D50705254DBEBA5259F9851 type 0
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 42 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:09:2D:08:BC:57 class 0x100114 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:09:2D:08:BC:57 role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 43 bdaddr 00:09:2D:08:BC:57 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 43
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:09:2D:08:BC:57 mode 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 43 slots 5
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0055
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0055 result 0 status 0
Connection successful
> HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 43 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 43
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 43 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:09:2D:08:BC:57 mode 2 clkoffset 0x0000
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
status 0x00 handle 43 ptype 0xff1e
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2-DH1 2-DH3 2-DH5 3-DH1 3-DH3
3-DH5
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 43
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:09:2D:08:BC:57 name 'Pocket_PC2'
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0055 flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0055 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 00001108-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x0055 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0055
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0055
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0056
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0056 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0056 flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0056 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 0000111e-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x0056 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0056
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0056
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0057
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0057 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0057 flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0057 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 00001103-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x0057 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0057
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0057
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0058
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0058 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0058 flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0058 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 00001101-0000-1000-8000-00805f9b34fb
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 234
L2CAP(d): cid 0x0058 len 230 [psm 1]
SDP SSA Rsp: tid 0x0 len 0xe1
count 222
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10002
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1101 (SP) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x5 > >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x0100 (SrvName)
str "KBtSerialChat"
aid 0x0101 (SrvDesc)
str "KDE Bluetooth Serial Chat Service"
record #1
aid 0x0000 (SrvRecHndl)
uint 0x10003
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1101 (SP) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1b > >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x0100 (SrvName)
str "KDE Bemused Server"
aid 0x0101 (SrvDesc)
str "KDE Server for the Bemused remote control protocol"
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0058
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0058
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0059
< ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0059 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 4096
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0059 flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0059 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 4
L2CAP(d): cid 0x0040 len 34 [psm 1]
SDP SSA Req: tid 0x0 len 0x1d
pat uuid-128 0350278f-3dca-4e62-831d-a41165ff906c
max 4088
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x0059 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0059
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0059
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43 packets 1
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 43 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 43 reason 0x16
Reason: Connection Terminated by Local Host

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users