Hi there,
Thanks for great software. It rocks when its configured right. Which
took some time - at least for me.
First, I spent a long time wondering why `hcitool scan` was empty /
didn't show any output other than "Scanning ..."
I had plugged in my brand new Bluetooth USB dongle and seen that it
loaded the USB and bluetooth drivers! Great! Then I installed and
bluez-utils and gnokii. `hcitool scan` kept showing empty output until I
unplugged and reconnected the dongle!!! How was I to know *that*? I
remember struggling with this before and also tearing my hair out when I
discovered it back then... :D I found several questions about this (with
some suggestions about pin_helper!! ) but no good answers/solutions.
Next, I spent *forever* trying to get pin_helper to work on my new
installation! And it didn't because I'm using 3.X versions. There are
*so* many posts out there talking about pin_helper, that I didn't even
question that they all might be invalid.
Somewhere along the line I discovered Marcel Holtmann mentioning =
something about passkey-agent. 3 minutes later all was working fine.
I've now spent almost 5 hours getting a new bluetooth dongle and my
phone to communicate, even though I already had a laptop working with
bluez setup right next to it.
May I please suggest that these two be added as FAQs?
(At the very least, I'll now be able to find these two valuable tips in
the mailing list archives next time! :D)
Ciao, and thanks for great code!
Peter
-- =
Peter Valdemar M=F8rch
http://www.morch.com
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3DDE=
VDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
> actually you might wanna write an article for the wiki by yourself.
> Check out wiki.bluez.org and feel free to extend the information.
>
> Regards
>
> Marcel
>
>
Hi Marcel,
This is really great, I didn't know there was a Wiki :S. I think you
should add links from the main page.
When I can I will try to write some articles about BlueZ usage there.
Cheers,
Manuel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Peter,
> Thanks for great software. It rocks when its configured right. Which
> took some time - at least for me.
>
> First, I spent a long time wondering why `hcitool scan` was empty /
> didn't show any output other than "Scanning ..."
>
> I had plugged in my brand new Bluetooth USB dongle and seen that it
> loaded the USB and bluetooth drivers! Great! Then I installed and
> bluez-utils and gnokii. `hcitool scan` kept showing empty output until I
> unplugged and reconnected the dongle!!! How was I to know *that*? I
> remember struggling with this before and also tearing my hair out when I
> discovered it back then... :D I found several questions about this (with
> some suggestions about pin_helper!! ) but no good answers/solutions.
>
> Next, I spent *forever* trying to get pin_helper to work on my new
> installation! And it didn't because I'm using 3.X versions. There are
> *so* many posts out there talking about pin_helper, that I didn't even
> question that they all might be invalid.
>
> Somewhere along the line I discovered Marcel Holtmann mentioning
> something about passkey-agent. 3 minutes later all was working fine.
>
> I've now spent almost 5 hours getting a new bluetooth dongle and my
> phone to communicate, even though I already had a laptop working with
> bluez setup right next to it.
>
> May I please suggest that these two be added as FAQs?
> (At the very least, I'll now be able to find these two valuable tips in
> the mailing list archives next time! :D)
actually you might wanna write an article for the wiki by yourself.
Check out wiki.bluez.org and feel free to extend the information.
Regards
Marcel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users