Hi
I'm still working on the problem I have with my usb
dongle.
In a red hat 7.3 with kernel 2.4.18 (i know it's
deprecated) I install bluez-kernel 2.3, bluez-libs,
bluez-utils, bluez-sdp and bluez-pan, but when I do
hciconfig, there is no output. Here are my outputs of
lspci:
00:00.0 Host bridge: Silicon Integrated Systems
[SiS]: Unknown device 0645 (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS]
5591/5592 AGP
00:02.0 ISA bridge: Silicon Integrated Systems [SiS]
85C503/5513
00:02.2 USB Controller: Silicon Integrated Systems
[SiS] 7001 (rev 07)
00:02.3 USB Controller: Silicon Integrated Systems
[SiS] 7001 (rev 07)
00:02.5 IDE interface: Silicon Integrated Systems
[SiS] 5513 [IDE] (rev d0)
00:05.0 Multimedia audio controller: C-Media
Electronics Inc CM8738 (rev 10)
00:0a.0 Ethernet controller: Realtek Semiconductor
Co., Ltd. RTL-8139/8139C (rev 10)
00:0d.0 Ethernet controller: National Semiconductor
Corporation DP83820 10/100/1000 Ethernet Controller
01:00.0 VGA compatible controller: nVidia
Corporation NV17 [GeForce4 MX440] (rev a3)
lsusb:
Bus 002 Device 001: ID 0000:0000 Virtual Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000 Virtual
idProduct 0x0000 Hub
bcdDevice 0.00
iManufacturer 0
iProduct 2 USB OHCI Root Hub
iSerial 1 d0891000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=4)
0000 (null)((null))
Bus 001 Device 001: ID 0000:0000 Virtual Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000 Virtual
idProduct 0x0000 Hub
bcdDevice 0.00
iManufacturer 0
iProduct 2 USB OHCI Root Hub
iSerial 1 d088f000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=4)
0000 (null)((null))
Bus 001 Device 002: ID 050d:0081 Belkin Components
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 224
bDeviceSubClass 1
bDeviceProtocol 1
bMaxPacketSize0 64
idVendor 0x050d Belkin Components
idProduct 0x0081
bcdDevice 5.25
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 193
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 224
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 16
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type none
wMaxPacketSize 0
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type none
wMaxPacketSize 0
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type none
wMaxPacketSize 9
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type none
wMaxPacketSize 9
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type none
wMaxPacketSize 17
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type none
wMaxPacketSize 17
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 224
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type none
wMaxPacketSize 25
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type none
wMaxPacketSize 25
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 224
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type none
wMaxPacketSize 33
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type none
wMaxPacketSize 33
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 224
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type none
wMaxPacketSize 49
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type none
wMaxPacketSize 49
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 254
bInterfaceSubClass 1
bInterfaceProtocol 0
iInterface 0
unknown descriptor type: 07 21 07 88 13 ff 03
Language IDs: (length=4)
0409 English(US)
lsmod:
Module Size Used by Not tainted
l2cap 19328 0 (unused)
hci 25024 0 [l2cap]
hci_usb 6560 0
bluez 36008 0 [hci_usb]
cmpci 32660 0 (autoclean)
binfmt_misc 7428 1
autofs 11812 0 (autoclean) (unused)
ns83820 10528 1
8139too 16288 1
mii 2280 0 [8139too]
audio 41056 0 (unused)
soundcore 6532 4 [cmpci audio]
ide-cd 30176 0 (autoclean)
cdrom 32096 0 (autoclean) [ide-cd]
usb-ohci 20704 0 (unused)
usbcore 72736 1 [hci_usb audio
usb-ohci]
ext3 67136 1
jbd 49400 1 [ext3]
dmesg:
Linux version 2.4.18-3
([email protected]) (gcc version 2.96
20000731 (Red Hat Linux 7.3 2.96-110)) #1 Thu Apr 18
07:37:53 EDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
BIOS-e820: 0000000000100000 - 000000000fffc000 (usable)
BIOS-e820: 000000000fffc000 - 000000000ffff000
(ACPI data)
BIOS-e820: 000000000ffff000 - 0000000010000000
(ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000
(reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000
(reserved)
On node 0 totalpages: 65532
zone(0): 4096 pages.
zone(1): 61436 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro
root=302 BOOT_FILE=/boot/vmlinuz-2.4.18-3
Initializing CPU#0
Detected 1816.178 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3617.58 BogoMIPS
Memory: 255488k/262128k available (1119k kernel
code, 6252k reserved, 775k data, 280k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6,
262144 bytes)
Inode cache hash table entries: 16384 (order: 5,
131072 bytes)
Mount-cache hash table entries: 4096 (order: 3,
32768 bytes)
Buffer cache hash table entries: 16384 (order: 4,
65536 bytes)
Page-cache hash table entries: 65536 (order: 6,
262144 bytes)
CPU: Before vendor init, caps: 3febfbff 00000000
00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 3febfbff 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000
00000000 00000000
CPU: Common caps: 3febfbff 00000000
00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch
([email protected])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf15a0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router SIS [1039/0008] at 00:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with
MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 496 slots per queue, batch=124
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS645
ide0: BM-DMA at 0xd800-0xd807, BIOS settings:
hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings:
hdc:pio, hdd:DMA
hda: ST340810A, ATA DISK drive
hdd: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 78165360 sectors (40021 MB) w/2048KiB Cache,
CHS=4865/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K
size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind
16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 122k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 280k freed
Adding Swap: 578332k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 9 for device 00:02.2
PCI: Sharing IRQ 9 with 00:02.3
usb-ohci.c: USB OHCI at membase 0xd088f000, IRQ 9
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems
[SiS] 7001
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 9 for device 00:02.3
PCI: Sharing IRQ 9 with 00:02.2
usb-ohci.c: USB OHCI at membase 0xd0891000, IRQ 9
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems
[SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2),
internal journal
ide-floppy driver 0.99.newide
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdd: DMA disabled
usb.c: registered new driver audio
audio.c: v1.0.0:USB Audio Class driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
8139too Fast Ethernet driver 0.9.24
PCI: Found IRQ 5 for device 00:0a.0
eth0: RealTek RTL8139 Fast Ethernet at 0xd08cc000,
00:e0:4c:e1:d6:63, IRQ 5
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting half-duplex based on auto-negotiated
partner ability 0000.
ns83820.c: National Semiconductor DP83820
10/100/1000 driver.
PCI: Found IRQ 10 for device 00:0d.0
PCI: Sharing IRQ 10 with 00:05.0
eth1: ns83820 v0.15: DP83820 v1.3: 00:05:1c:98:20:73
io=0xe4800000 irq=10 f=sg
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
cmpci: version $Revision: 5.64 $ time 11:04:21 Mar
11 2004
PCI: Found IRQ 10 for device 00:05.0
PCI: Sharing IRQ 10 with 00:0d.0
cmpci: found CM8738 adapter at io 0xa800 irq 10
cmpci: chip version = 055
cmpci: Enable SPDIF loop
cdrom: This disc doesn't have any tracks I recognize!
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
cdrom: This disc doesn't have any tracks I recognize!
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
hub.c: USB new device connect on bus1/2, assigned
device number 2
usb.c: USB device 2 (vend/prod 0x50d/0x81) is not
claimed by any active driver.
eth1: link now 1000 mbps, full duplex and up.
BlueZ Core ver 2.2 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky
<[email protected]>
BlueZ HCI USB driver ver 1.0 Copyright (C) 2000,2001
Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky
<[email protected]>
usb.c: registered new driver hci_usb
hci_usb_probe: Can't register HCI device
BlueZ HCI Core ver 1.1 Copyright (C) 2000,2001
Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky
<[email protected]>
BlueZ L2CAP ver 1.1 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky
<[email protected]>
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
eth1: link now down.
eth1: link now 1000 mbps, full duplex and up.
(sorry for this long e-mail)
Thank you in advance!!!
Regards
Albert
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Albert,
> I'm still working on the problem I have with my usb
> dongle.
> In a red hat 7.3 with kernel 2.4.18 (i know it's
> deprecated) I install bluez-kernel 2.3, bluez-libs,
> bluez-utils, bluez-sdp and bluez-pan, but when I do
> hciconfig, there is no output.
show me /proc/bus/usb/devices and tell me what dongle did you bought.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users