Could someone please explain to me how I connect from a USB bluetooth
dongle to a bluetooth serial dongle that uses a PIN. I try this:
# l2ping 00:0B:CE:00:7A:8F
Can't connect: Permission denied
A simultaneous hcidump shows:
# hcidump -V
HCI sniffer - Bluetooth packet analyzer ver 1.17
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x18 handle 41 bdaddr 00:0B:CE:00:7A:8F type ACL encrypt 0x00
Error: Unknown LMP PDU
This is on a Debian/unstable system with:
bluez-hcidump 1.17-1
bluez-pin 0.25-1
bluez-utils 2.15-1
installed. Linux kernel v2.6.11.7.
Thanks!
--
Russell Senior ``I have nine fingers; you have ten.''
[email protected]
-------------------------------------------------------
SF.Net email is sponsored by: Tell us your software development plans!
Take this survey and enter to win a one-year sub to SourceForge.net
Plus IDC's 2005 look-ahead and a copy of this survey
Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Russell,
> Could someone please explain to me how I connect from a USB bluetooth
> dongle to a bluetooth serial dongle that uses a PIN. I try this:
>
> # l2ping 00:0B:CE:00:7A:8F
> Can't connect: Permission denied
>
> A simultaneous hcidump shows:
>
> # hcidump -V
> HCI sniffer - Bluetooth packet analyzer ver 1.17
> device: hci0 snap_len: 1028 filter: 0xffffffff
> < HCI Command: Create Connection (0x01|0x0005) plen 13
> > HCI Event: Command Status (0x0f) plen 4
> Create Connection (0x01|0x0005) status 0x00 ncmd 1
> > HCI Event: PIN Code Request (0x16) plen 6
> < HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
> > HCI Event: Command Complete (0x0e) plen 10
> PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
> > HCI Event: Connect Complete (0x03) plen 11
> status 0x18 handle 41 bdaddr 00:0B:CE:00:7A:8F type ACL encrypt 0x00
> Error: Unknown LMP PDU
it seems that the PIN helper program can't be executed. Look at the
mailing list archives for help in this case.
Regards
Marcel
-------------------------------------------------------
SF.Net email is sponsored by: Tell us your software development plans!
Take this survey and enter to win a one-year sub to SourceForge.net
Plus IDC's 2005 look-ahead and a copy of this survey
Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users