Hallo,
I've got CSR based USB dongles, for which hciconfig -a
gives "Packet type: DM1 DH1 HV1". Whatever HV1 is,
for DH1 http://www.holtmann.org/lecture/bluetooth/bt_primer.pdf
reports payload rates of around 180 kbit/s.
Now when querying the phone (Nokia 6230) I get as feature
<HV3 packets>.
Does this mean, that I could use e.g. DH3 with that phone
(390 kbit/s symmetric or 586 / 86 asymmetric)?
Which USB dongles would support that?
Lutz
--
_ | Lutz Pressler | Tel: ++49-551-3700002
|_ |\ | | Service Network GmbH | FAX: ++49-551-3700009
._|ER | \|ET | Bahnhofsallee 1b | mailto:[email protected]
Service Network | D-37081 Goettingen | http://www.SerNet.DE/
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g.
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Lutz,
> > every CSR based that I have seen so far supports every packet type from
> > the Bluetooth 1.1 specification. However you can set the used packet
> > types by yourself, but this makes no sense. Simply enable them all and
> > let the link manager decide what's the best to use. The HVx packets for
> > SCO audio links and don't matter for the data transfers over ACL.
> Is it normal than that file transfer with obexftp to the phone is
> not faster than 1 MB per minute?
I never did any bandwith tests with OBEX, but actually the flow of
L2CAP<->RFCOMM<->OBEX gives you a big performance decrease of the 1 Mbit
bandwith of a piconet. But this must not be a problem of the dongle,
because both link managers must decide to use the correct packet type.
And of course the phone CPU must be fast enough to handle the RFCOMM and
OBEX protocol very well. There are more bottlenecks so this question is
not really easy to answer.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g.
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
On 0, Lutz Pressler <[email protected]> wrote:
> I've got CSR based USB dongles, for which hciconfig -a
> gives "Packet type: DM1 DH1 HV1". Whatever HV1 is,
> for DH1 http://www.holtmann.org/lecture/bluetooth/bt_primer.pdf
> reports payload rates of around 180 kbit/s.
> Now when querying the phone (Nokia 6230) I get as feature
> <HV3 packets>.
> Does this mean, that I could use e.g. DH3 with that phone
> (390 kbit/s symmetric or 586 / 86 asymmetric)?
> Which USB dongles would support that?
HV* are packets of an SCO connection. My understanding of the
specification ist that the speed of an SCO connection is always
64kb/s. You need only larger HV Packets if you have several SCO
Connections which have to share bandwidth.
Why SCO isn't usable for data transfer is explained several times in
mailinglist archive.
nicholas
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g.
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
> every CSR based that I have seen so far supports every packet type from
> the Bluetooth 1.1 specification. However you can set the used packet
> types by yourself, but this makes no sense. Simply enable them all and
> let the link manager decide what's the best to use. The HVx packets for
> SCO audio links and don't matter for the data transfers over ACL.
Is it normal than that file transfer with obexftp to the phone is
not faster than 1 MB per minute?
Thanks,
Lutz
--
_ | Lutz Pressler | Tel: ++49-551-3700002
|_ |\ | | Service Network GmbH | FAX: ++49-551-3700009
._|ER | \|ET | Bahnhofsallee 1b | mailto:[email protected]
Service Network | D-37081 Goettingen | http://www.SerNet.DE/
Hi Lutz,
> I've got CSR based USB dongles, for which hciconfig -a
> gives "Packet type: DM1 DH1 HV1". Whatever HV1 is,
> for DH1 http://www.holtmann.org/lecture/bluetooth/bt_primer.pdf
> reports payload rates of around 180 kbit/s.
> Now when querying the phone (Nokia 6230) I get as feature
> <HV3 packets>.
> Does this mean, that I could use e.g. DH3 with that phone
> (390 kbit/s symmetric or 586 / 86 asymmetric)?
> Which USB dongles would support that?
every CSR based that I have seen so far supports every packet type from
the Bluetooth 1.1 specification. However you can set the used packet
types by yourself, but this makes no sense. Simply enable them all and
let the link manager decide what's the best to use. The HVx packets for
SCO audio links and don't matter for the data transfers over ACL.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g.
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users