Hi,
How did you get name for other bluetooth device to find? Give the name
in codes instead of from /etc/bluetooth/hcid.conf ? Are other utilities functional
ok while disabling those options?
Thanks for helps,
Al
-----Original Message-----
From: [email protected] ?N?z blookk -
Sent: 2005/8/19 [?P????] ?W?? 03:21
To: [email protected]
Cc:
Subject: RE: [Bluez-users] RE: Port BlueZ lib and utility on embedded uClinux
Hi,
When I am porting BlueZ to uCLinux, I found the same problem.
I try with "select()" instead of "poll()", but I did not solve the problem.
I decided disable this option, and do not read the local name or other characteristics that I do not remenber.
Regards.
_____
From: "Al" <[email protected]>
Reply-To: [email protected]
To: <[email protected]>
Subject: [Bluez-users] RE: Port BlueZ lib and utility on embedded uClinux
Date: Thu, 18 Aug 2005 14:42:09 +0800
>
>Hi,
>
> The poll() always return error :
>
> while ((n = poll(&p, 1, to)) < 0) in funcion int hci_send_req () (file: hci.c) results in "Can't read local name on hci0: Connection timed out (110)"
>
> Has anyone had same problem using poll() in embedded linux?
>
>thanks a lot,
>
>Al
>-----Original Message-----
>From: Al on behalf of Al
>Sent: Wed 8/17/2005 3:48 PM
>To: [email protected]
>Cc:
>Subject: Port BlueZ lib and utility on embedded uClinux
>Hi, there:
>
> I'm trying to port BlueZ on embedded uClinux. Kernel part seems ok so far.
>
> For the HCI utility on user space part, I first have /hci-lib and /hcid
>compiled to hcid. Then have /hci-lib and /hciconfig compiled to hciconfig.
>Copy two applications, hcid and hciconfig, to ramdisk. Also I have hcid.conf
>copied to ramdisk /etc/bluetooth/
>
> After boot up, run hcid, then hciconfig hci0 up to bring up the device.
>MAC address is read correctly. But when running hciconfig -a, it can't read local name correctly.
>Are those steps correct? What do I miss?
>
>thanks a lot,
>
>Al
>
>--------------------------------------
>If I rn hcid -n to see the printout:
>
>/>hcid -n
>hcid[18]: Bluetooth HCI deamon
>hcid[18]: Starting security manager 0
>
>---------------------------------------------------------------
>/> hcid
>/> hciconfig hci0 up
>/> hciconfig -a
>hci0: Type: USB
> BD Address: 00:11:67:03:DB:62 ACL MTU: 678:8 SCO MTU: 48:10
> UP RUNNING PSCAN ISCAN
> RX bytes:323 acl:0 sco:0 events:9 errors:0
> TX bytes:33 acl:0 sco:0 commands:9 errors:0
> Features: 0xff 0xff 0x8d 0x78 0x08 0x18 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy:
> Link mode: SLAVE ACCEPT
>
>
>Can't read local name on hci0: Connection timed out (110)
>pid 17: failed 256
>/>
>-------------------------------------------------------------------------------------------
>
>
>
>
>
><< winmail.dat >>
------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ Bluez-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bluez-users