Hi Marcel,
> Hi Jers,
>
> > I'm trying to create a simple picon=
et consisting of a master and two slaves. I'm using three Digicom Palladi=
o
> > dongles.
> > My packages list is:
> > - bluez-libs-2.8-1.=
i386.rpm
> > - bluez-bluefw-1.0-1.i386.rpm
> > - bluez-hcidump-1.=
10-1.i386.rpm
> > - bluez-sdp-1.5-1.i386.rpm
> > - bluez-pan-1.1-=
1.i386.rpm
> > - bluez-utils-2.8-1.i386.rpm
> > - bridge-utils-0.=
9.6-1.i386.rpm
>
> the bluez-sdp, bluez-pan and bluez-bluefw packag=
es are deprecated. Get
> yourself newer versions of bluez-libs and blue=
z-utils.
>
> What is the output of "hciconfig -a" for these dongl=
es?
>
hci0: Type: USB
BD Address: 00:E0:98:85:A1:5F A=
CL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
R=
X bytes:15287 acl:102 sco:0 events:610 errors:0
TX bytes:38313 =
acl:383 sco:0 commands:136 errors:0
Features: 0xff 0xff 0x0f 0x=
00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1=
HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT
=
Name: 'Slave1'
Class: 0x000000
Service Classes: Un=
specified
Device Class: Miscellaneous,
HCI Ver: 1.1 (=
0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver: 0x175
Manufa=
cturer: Cambridge Silicon Radio (10)
hci0: Type: USB
BD =
Address: 00:E0:98:85:A1:64 ACL MTU: 192:8 SCO MTU: 64:8
UP RUN=
NING PSCAN ISCAN
RX bytes:22169 acl:233 sco:0 events:192 errors=
:0
TX bytes:7885 acl:92 sco:0 commands:62 errors:0
Fe=
atures: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM=
1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link m=
ode: SLAVE ACCEPT
Name: 'Slave2'
Class: 0x000000
=
Service Classes: Unspecified
Device Class: Miscellaneous,=
HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subve=
r: 0x175
Manufacturer: Cambridge Silicon Radio (10)
hci=
0: Type: USB
BD Address: 00:08:E0:01:9E:86 ACL MTU: 192:8 SC=
O MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:21366 acl=
:130 sco:0 events:217 errors:0
TX bytes:1668 acl:23 sco:0 comma=
nds:108 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0=
x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
=
Link policy:
Link mode: SLAVE ACCEPT
Name: 'Master' =0D
=
Class: 0x000000
Service Classes: Unspecified
=
Device Class: Miscellaneous,
HCI Ver: 1.1 (0x1) HCI Rev: 0x33c =
LMP Ver: 1.1 (0x1) LMP Subver: 0x33c
Manufacturer: Cambridge Si=
licon Radio (10)
Regards.
Jers
=0A=0A=0A=0A_________=
___________________________________________________=0ARegala e regalati L=
ibero ADSL: 3 mesi gratis e navighi veloce. 1.2 Mega di musica, film, vid=
eo e sport. =0AAbbonati subito senza costi di attivazione su http://www.l=
ibero.it=0A=0A
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Jers,
> > What is the output of "hciconfig -a" for these dongles?
> >
>
> hci0: Type: USB
> BD Address: 00:E0:98:85:A1:5F ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:15287 acl:102 sco:0 events:610 errors:0
> TX bytes:38313 acl:383 sco:0 commands:136 errors:0
> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy:
> Link mode: SLAVE ACCEPT
> Name: 'Slave1'
> Class: 0x000000
> Service Classes: Unspecified
> Device Class: Miscellaneous,
> HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver: 0x175
> Manufacturer: Cambridge Silicon Radio (10)
>
> hci0: Type: USB
> BD Address: 00:E0:98:85:A1:64 ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:22169 acl:233 sco:0 events:192 errors:0
> TX bytes:7885 acl:92 sco:0 commands:62 errors:0
> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy:
> Link mode: SLAVE ACCEPT
> Name: 'Slave2'
> Class: 0x000000
> Service Classes: Unspecified
> Device Class: Miscellaneous,
> HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver: 0x175
> Manufacturer: Cambridge Silicon Radio (10)
>
>
> hci0: Type: USB
> BD Address: 00:08:E0:01:9E:86 ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:21366 acl:130 sco:0 events:217 errors:0
> TX bytes:1668 acl:23 sco:0 commands:108 errors:0
> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy:
> Link mode: SLAVE ACCEPT
> Name: 'Master'
> Class: 0x000000
> Service Classes: Unspecified
> Device Class: Miscellaneous,
> HCI Ver: 1.1 (0x1) HCI Rev: 0x33c LMP Ver: 1.1 (0x1) LMP Subver: 0x33c
> Manufacturer: Cambridge Silicon Radio (10)
there is no link policy set (rswitch) and both of your slaves have
firmwares pre HCI 16.4 and so there are limitations. Check my webpage
about CSR for more details.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users